COILCRAFT DR0810-563L

Document 275-3
Power Inductors–DR0810Series
These small footprint power inductors are designed for
maximum efficiency and lowest cost. They are ideal for
noise filtering in power amplifiers, power supplies and
speaker crossover networks.
This series is available in a broad range of inductance
from 3.3 to 1000 µH with 10% tolerance for all values
above 8.2 µH.
Their open construction allows current ratings up to
9.5 Amps with a mere 0.01 Ohms of resistance. They
have industry-standard pin spacing of 5 mm and a rugged
PVC sleeve to completely protect the winding.
Free evaluation samples are available by contacting
Coilcraft or ordering them on-line at www.coilcraft.com.
Part
number
Inductance1
(µH)
DCR max
(Ohms)
SRF typ2
(MHz)
DR0810-332L
DR0810-472L
DR0810-562L
DR0810-682L
DR0810-822L
DR0810-103L
DR0810-123L
DR0810-153L
DR0810-183L
DR0810-223L
DR0810-273L
DR0810-333L
DR0810-393L
DR0810-473L
DR0810-563L
DR0810-683L
DR0810-823L
DR0810-104L
DR0810-124L
DR0810-154L
DR0810-184L
DR0810-224L
DR0810-274L
DR0810-334L
DR0810-394L
DR0810-474L
DR0810-564L
DR0810-684L
DR0810-824L
DR0810-105L
3.3 ±20%
4.7 ±20%
5.6 ±20%
6.8 ±20%
8.2 ±20%
10 ±10%
12 ±10%
15 ±10%
18 ±10%
22 ±10%
27 ±10%
33 ±10%
39 ±10%
47 ±10%
56 ±10%
68 ±10%
82 ±10%
100 ±10%
120 ±10%
150 ±10%
180 ±10%
220 ±10%
270 ±10%
330 ±10%
390 ±10%
470 ±10%
560 ±10%
680 ±10%
820 ±10%
1000 ±10%
0.010
0.012
0.017
0.018
0.019
0.026
0.030
0.035
0.038
0.046
0.070
0.080
0.088
0.10
0.15
0.17
0.20
0.22
0.29
0.34
0.38
0.44
0.62
0.70
0.88
1.00
1.11
1.45
1.70
2.20
47
33
28
26
25
23
20
18
15
14
11
10
10
9.5
8.0
7.0
7.0
6.0
5.0
4.5
4.0
4.0
3.8
3.6
3.0
2.7
2.5
2.5
2.1
2.1
1. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A
LCR-meter or equivalent.
2. SRF measured using an Agilent/HP 4191A or equilvalent.
3. Current that causes the specified temperature rise from 25°C ambient.
Irms (A)3
20°C rise 40°C rise
7.0
6.4
5.8
5.2
4.6
4.0
3.8
3.5
3.3
3.1
2.8
2.6
2.4
2.1
1.9
1.7
1.4
1.2
1.1
1.1
1.0
0.93
0.86
0.80
0.73
0.66
0.60
0.53
0.46
0.40
4. Ambient temperature range: –40°C to +85°C with Irms current
5. Storage temperature range: Component: –40°C to +85°C
Packaging: –55°C to +80°C
6. Electrical specifications at 25°C.
Specifications subject to change without notice.
Please check our website for latest information. Document 275-3
© Coilcraft, Inc. 2007
9.5
8.8
8.1
7.4
6.7
6.0
5.7
5.3
5.0
4.6
4.3
3.9
3.6
3.2
2.9
2.5
2.2
1.8
1.7
1.6
1.5
1.40
1.28
1.20
1.10
0.97
0.86
0.76
0.66
0.55
Revised 10/10/07
Document 275-4
Power Inductors – DR0810 Series
Typical L vs Frequency
Typical L vs Current
10000
10000
1000 µH
1000 µH
1000
Inductance (µH)
Inductance (µH)
1000
100 µH
100
100 µH
100
10 µH
10 µH
10
10
1
0.01
0.1
1
10
1
10
Specifications subject to change without notice.
Please check our website for latest information. Document 275-4
Revised 10/10/07
Frequency (MHz)
0.41
max
10,5
1
0.01
0.1
Current (A)
XXX
Part
marking
0.47
max
12,0
0.157 ±0.02
4,0 ±0,5
0.024
dia
0,6
0.197 ±0.02
5,0 ±0,5
Weight:
2.0 – 2.7 g
Terminations: Tin-silver over tin over copper over steel.
Packaging:
300 parts per tray
800 parts in fan-fold tape
© Coilcraft, Inc. 2007