March 6, 2007 SMD INDUCTOR DR355-2 SERIES Features z z z z z Low Profile Surface Mount Design Suitable for Reflow soldering Inductance Range from 17.5nH to 43nH Operating Temp. -40°C to +125°C Tinned Leads with Leaded Solder is Available (note 4) ELECTRICAL SPECIFICATIONS AT 25ºC INDUCTANCE (nH) @ 0A @150MHz 17.5±5% @150MHz 22.0±5% @150MHz 28.0±5% @150MHz 35.5±5% @150MHz 43.0±5% PART NO. DR355-2-183 DR355-2-223 DR355-2-283 DR355-2-363 DR355-2-433 DCR (mΩ) MAX. 4.5 5.2 6.0 6.8 7.9 MAX. RATED CURRENT (A) (TYP.) 4.0 4.0 4.0 4.0 4.0 MECHANICAL OUTLINES 2.79 5.84 +/-0.25 3.30 1.27 4.70 SUGGESTED PAD LAYOUT 6.84 3.05 .58 +/-0.38 NOTE: 1. 2. 3. 4. 5. 3.18 All dimensions shown are in “mm”. All dimensions are reference unless other specified Tape and reel quantity, 1000 pcs/reel For non-RoHS parts replace DR prefix with 42- (e.g. DR355-2 becomes 42-355-2) Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020C DATATRONIC: 28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice: