March 6, 2007 DR 361 SERIES, HIGH CURRENT, HIGH TEMPERATURE INDUCTORS Features z z z z z Low EMI High Current Capacity Operating Temp. -55°C to +200°C Horizontal or Vertical mount (Note 5) Tinned Leads with Leaded Solder is Available (note 7) Part Number L(µH) ±15% (1) DR361-X-122 DR361-X-182 DR361-X-222 DR361-X-332 DR361-X-392 DR361-X-472 DR361-X-562 DR361-X-682 DR361-X-822 DR361-X-103 DR361-X-123 DR361-X-153 DR361-X-183 DR361-X-223 DR361-X-273 DR361-X-333 DR361-X-393 DR361-X-473 DR361-X-563 DR361-X-683 DR361-X-823 DR361-X-104 DR361-X-124 DR361-X-154 DR361-X-184 DR361-X-224 DR361-X-274 DR361-X-334 DR361-X-394 DR361-X-474 DR361-X-564 DR361-X-684 DR361-X-824 DR361-X-105 1.2 1.8 2.2 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 L(µH)±15 % @ I rated (2) 1.0 1.5 1.8 2.7 3.1 3.7 4.4 5.2 6.2 7.9 9.4 11.5 13.6 16.3 19.7 23.5 27.4 34.9 40.9 48.8 57.6 68.9 80.8 98.4 115.6 137.5 184.8 220.7 255.2 300.5 350.3 414.8 548.5 653.1 Idc (A) 23.8 21.8 20.1 18.8 17.8 16.9 16.1 15.7 15.1 11.2 10.9 10.3 9.7 9.3 8.9 8.4 8.1 6.4 6.1 5.8 5.6 5.3 5.0 4.8 4.6 4.3 3.3 3.1 3.0 2.8 2.7 2.6 2.0 1.9 DCR (Ω) (MAX) Dim. A Nom. Dim. B Nom. Dim. C Nom. 0.003 0.004 0.005 0.005 0.006 0.006 0.007 0.007 0.008 0.014 0.015 0.017 0.018 0.020 0.022 0.025 0.026 0.042 0.046 0.050 0.055 0.061 0.067 0.075 0.082 0.091 0.16 0.18 0.19 0.21 0.23 0.27 0.44 0.49 0.46 0.46 0.46 0.46 0.46 0.46 0.46 0.46 0.46 0.46 0.46 0.46 0.46 0.45 0.45 0.45 0.45 0.44 0.44 0.44 0.48 0.48 0.48 0.48 0.48 0.48 0.46 0.46 0.46 0.49 0.49 0.49 0.49 0.49 0.88 0.88 0.88 0.88 0.88 0.88 0.88 0.88 0.88 0.88 0.88 0.88 0.88 0.87 0.87 0.87 0.87 0.86 0.86 0.86 0.90 0.90 0.90 0.90 0.90 0.90 0.88 0.88 0.88 0.91 0.91 0.91 0.91 0.91 0.053 0.053 0.053 0.053 0.053 0.053 0.053 0.053 0.053 0.053 0.053 0.053 0.053 0.042 0.042 0.042 0.042 0.034 0.034 0.034 0.034 0.034 0.034 0.034 0.034 0.034 0.027 0.027 0.027 0.027 0.027 0.027 0.022 0.022 DATATRONIC: (2) Rated Current tested at .25VRMS, 1kHz (3) All materials are rated at 200ºC (4) Electrical Specifications at 25°C (5) DR361-2-XXX denotes vertical design. DR361-1-XXX denotes horizontal design (6) All dimensions are shown in inches “in”. General tolerance is ±0.010in, unless otherwise specified. (7) For non-RoHS parts parts replace DR prefix with 42- (e.g. DR361 becomes 42-361) (8) Terminal finish is compliant to RoHS requirements. B C 0.55 MAX 0.55 MAX Vertical DR361-2-XXX (1) OCL measured at .25VRMS, 1kHz. 1 0.95 MAX C NOTES A 0.95 MAX 2 Schematic Horizontal DR361-1-XXX 28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice.