NSC DS2003T High current/voltage darlington driver Datasheet

DS2003/DS9667/DS2004
High Current/Voltage Darlington Drivers
General Description
The DS2003/DS9667/DS2004 are comprised of seven high
voltage, high current NPN Darlington transistor pairs. All
units feature common emitter, open collector outputs. To
maximize their effectiveness, these units contain suppression diodes for inductive loads and appropriate emitter base
resistors for leakage.
The DS2003/DS9667 has a series base resistor to each
Darlington pair, thus allowing operation directly with TTL or
CMOS operating at supply voltages of 5.0V.
The DS2004 has an appropriate input resistor to allow direct
operation from CMOS or PMOS outputs operating from supply voltages of 6.0V to 15V.
The DS2003/DS9667/DS2004 offer solutions to a great
many interface needs, including solenoids, relays, lamps,
small motors, and LEDs. Applications requiring sink currents
beyond the capability of a single output may be accommodated by paralleling the outputs.
Features
Y
Y
Y
Y
Y
Y
Connection Diagram
Seven high gain Darlington pairs
High output voltage (VCE e 50V)
High output current (IC e 350 mA)
TTL, PMOS, CMOS compatible
Suppression diodes for inductive loads
Extended temperature range
Order Numbers
16-Lead DIP
J Package
Number
J16A
N Package
Number
N16E
M Package
Number
M16A
DS2003
DS9667
DS2003MJ
DS2003TJ
DS2003CJ
DS9667MJ
DS9667TJ
DS9667CJ
DS2003TN
DS2003CN
DS9667TN
DS9667CN
DS2003TM
DS2003CM
DS2004
DS2004MJ
DS2004TJ
DS2004CJ
DS2004TN
DS2004CN
DS2004TM
DS2004CM
TL/F/9647 – 1
Top View
C1996 National Semiconductor Corporation
TL/F/9647
RRD-B30M66/Printed in U. S. A.
DS2003/DS9667/DS2004 High Current/Voltage Darlington Drivers
December 1995
Absolute Maximum Ratings (Note 1)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales
Office/Distributors for availability and specifications.
Storage Temperature Range
Ceramic DIP
Molded DIP
Operating Temperature Range
DS2003M/DS9667M
DS2004M
Lead Temperature
Ceramic DIP (Soldering, 60 seconds)
Molded DIP (Soldering, 10 seconds)
Maximum Power Dissipation* at 25§ C
Cavity Package
Molded Package
S.O. Package
b 65§ C to a 175§ C
b 65§ C to a 150§ C
DS2003T/DS9667T
DS2004T
b 55§ C to a 125§ C
b 55§ C to a 125§ C
b 40§ C to a 105§ C
b 40§ C to a 105§ C
DS2003C/DS9667C
DS2004C
0§ C to a 85§ C
0§ C to a 85§ C
300§ C
265§ C
2016 mW
1838 mW
926 mW
*Derate cavity package 16.13 mW/§ C above 25§ C; derate molded DIP package 14.7 mW/§ C above 25§ C. Derate S.O. package 7.4 mW/§ C.
Input Voltage
Output Voltage
Emitter-Base Voltage
Continuous Collector Current
Continuous Base Current
30V
55V
6.0V
500 mA
25 mA
Electrical Characteristics TA e 25§ C, unless otherwise specified (Note 2)
Symbol
Parameter
ICEX
Output Leakage
Current
VCE(Sat)
II(ON)
Collector-Emitter
Saturation Voltage
Input Current
Conditions
TA e 25§ C, VCE e 50V (Figure 1a)
Min
Typ
Max
TA e 85§ C, VCE e 50V (Figure 1a) for Commercial Grade
TA e 25§ C, VCE e 50V, VI e 1.0V (Figure 1b)
DS2004
IC e 350 mA, IB e 500 mA (Figure 2) (Note 3)
1.25
1.6
IC e 200 mA, IB e 350 mA (Figure 2)
1.1
1.3
IC e 100 mA, IB e 250 mA (Figure 2)
0.9
1.1
DS2003/DS9667
0.93
1.35
DS2004
0.35
0.5
1.0
1.45
VI e 3.85V (Figure 3)
VI e 5.0V (Figure 3)
100
Input Current
(Note 4)
TA e 85§ C for Commercial
IC e 500 mA (Figure 4)
VI(ON)
Input Voltage
(Note 5)
VCE e 2.0V, IC e 200 mA (Figure 5)
VCE e 2.0V, IC e 250 mA (Figure 5)
50
VCE e 2.0V, IC e 300 mA (Figure 5)
VCE e 2.0V, IC e 125 mA (Figure 5)
mA
500
VI e 12V (Figure 3)
II(OFF)
Units
20
100
DS2003/DS9667
V
mA
mA
2.4
2.7
3.0
DS2004
V
5.0
VCE e 2.0V, IC e 200 mA (Figure 5)
6.0
VCE e 2.0V, IC e 275 mA (Figure 5)
VCE e 2.0V, IC e 350 mA (Figure 5)
7.0
8.0
CI
Input Capacitance
15
30
pF
tPLH
Turn-On Delay
0.5 VI to 0.5 VO
1.0
ms
tPHL
Turn-Off Delay
0.5 VI to 0.5 VO
1.0
ms
IR
Clamp Diode
Leakage Current
VR e 50V (Figure 6)
50
100
mA
mA
VF
Clamp Diode
Forward Voltage
IF e 350 mA (Figure 7)
2.0
V
TA e 25§ C
TA e 85§ C
1.7
Note 1: ‘‘Absolute Maximum Ratings’’ are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices
should be operated at these limits. The tables of ‘‘Electrical Characteristics’’ provide conditions for actual device operation.
Note 2: All limits apply to the complete Darlington series except as specified for a single device type.
Note 3: Under normal operating conditions these units will sustain 350 mA per output with VCE (Sat) e 1.6V at 70§ C with a pulse width of 20 ms and a duty cycle of
30%.
Note 4: The II(OFF) current limit guaranteed against partial turn-on of the output.
Note 5: The VI(ON) voltage limit guarantees a minimum output sink current per the specified test conditions.
http://www.national.com
2
Typical Performance Characteristics
Collector Current vs
Saturation Voltage
Collector Current vs
Input Current
DS2003/DS9667
Input Current vs
Input Voltage
DS2004
Input Current vs
Input Voltage
Peak Collector Current vs
Duty Cycle and Number of
Outputs (Molded Package)
Peak Collector Current vs
Duty Cycle and Number of
Outputs (Ceramic Package)
TL/F/9647 – 6
3
http://www.national.com
Equivalent Circuits
TL/F/9647 – 5
TL/F/9647–3
Test Circuits
TL/F/9647–7
FIGURE 1a
TL/F/9647 – 8
FIGURE 1b
TL/F/9647 – 9
FIGURE 2
TL/F/9647–10
FIGURE 3
TL/F/9647 – 11
TL/F/9647 – 12
FIGURE 4
FIGURE 5
TL/F/9647 – 14
FIGURE 7
TL/F/9647–13
FIGURE 6
http://www.national.com
4
Typical Applications
Buffer for Higher Current Loads
TL/F/9647 – 16
TL/F/9647 – 17
5
http://www.national.com
http://www.national.com
6
Physical Dimensions inches (millimeters) unless otherwise noted
Ceramic Dual-In-Line Package (J)
Order Number DS2003CJ, DS9667CJ, DS2003MJ, D9667MJ,
DS2003TJ, DS9667TJ, DS2004CJ, DS2004MJ or DS2004TJ
NS Package Number J16A
Surface Mount Package (M)
Order Number DS2003CM, DS9667CM, DS2003TM, DS9667TM, DS2004CM or DS2004TM
NS Package Number M16A
7
http://www.national.com
DS2003/DS9667/DS2004 High Current/Voltage Darlington Drivers
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
Molded Dual-In-Line Package (N)
Order Number DS2003CN, DS9667CN, DS2003TN, DS9667TN, DS2004CN or DS2004TN
NS Package Number N16E
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and whose
failure to perform, when properly used in accordance
with instructions for use provided in the labeling, can
be reasonably expected to result in a significant injury
to the user.
National Semiconductor
Corporation
1111 West Bardin Road
Arlington, TX 76017
Tel: 1(800) 272-9959
Fax: 1(800) 737-7018
http://www.national.com
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
National Semiconductor
Europe
Fax: a49 (0) 180-530 85 86
Email: europe.support @ nsc.com
Deutsch Tel: a49 (0) 180-530 85 85
English Tel: a49 (0) 180-532 78 32
Fran3ais Tel: a49 (0) 180-532 93 58
Italiano Tel: a49 (0) 180-534 16 80
National Semiconductor
Hong Kong Ltd.
13th Floor, Straight Block,
Ocean Centre, 5 Canton Rd.
Tsimshatsui, Kowloon
Hong Kong
Tel: (852) 2737-1600
Fax: (852) 2736-9960
National Semiconductor
Japan Ltd.
Tel: 81-043-299-2308
Fax: 81-043-299-2408
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
Similar pages