DSR6V600P5 6A DIODESTAR RECTIFIER POWERDI®5 NEW PRODUCT Product Summary Features and Benefits • VRRM (V) IO (A) VF (V) TRR max (nS) QRR typ. (nC) 600 6 3.0 23 135 • • • • • • Description and Applications This DIODESTAR rectifier has been optimized for Power Factor Correction circuits operating in continuous conduction mode (CCM). It is also suitable for use as a re-circulating diode in High Intensity Discharge Lighting. • Mechanical Data • • CCM Power Factor Correction • High Intensity Discharge Lighting • Motor control Optimized for Qrr and trr to minimize diode reverse recovery losses in Continuous Conduction Mode (CCM) Power Factor Correction circuits Soft switching, low EMI ° 175 C maximum operating junction temperature Thermally efficient, small form factor package enables higher density designs. Off board profile of 1.1mm, ideal for use in low profile applications Lead Free Finish, RoHS Compliant (Note 1) “Green” Molding Compound (No Br, Sb) • • • LEFT PIN RIGHT PIN Top View Bottom View ® Case: POWERDI 5 Case Material: Molded Plastic, UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish - Matte Tin annealed over Copper lead frame. Solderable per MIL-STD-202, Method 208 Weight 0.093 grams (approximate) BOTTOMSIDE HEAT SINK Note: Pins Left & Right must be electrically connected at the printed circuit board. Ordering Information (Note 2) Part Number DSR6V600P5-13 Notes: Case ® POWERDI 5 Packaging 5000/Tape & Reel 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes. 2. For packaging details, go to our website at http://www.diodes.com. Marking Information S6V600 YYWWK S6V600 = Product Type Marking Code = Manufacturers’ Code Marking YYWW = Date Code Marking YY = Last Two Digits of Year (ex: 09 for 2009) WW = Week Code (01 – 53) K = Factory Designator POWERDI is a registered trademark of Diodes Incorporated. 1 of 5 DSR6V600P5 September 2011 Document number: DS35211 Rev. 4 - 2 © Diodes Incorporated www.diodes.com DSR6V600P5 Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Output Current Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Symbol VRRM VRWM VRM IO Value Unit 600 V 6 A IFSM 55 A Symbol Value Unit RθJA RθJA TJ, TSTG 104 30 ºC/W -65 to +175 ºC Thermal Characteristics Characteristic Maximum Thermal Resistance Thermal Resistance Junction to Ambient (Note 4) Thermal Resistance Junction to Ambient (Note 5) Operating and Storage Temperature Range Electrical Characteristics @TA = 25°C unless otherwise specified Characteristic Forward Voltage Drop Leakage Current (Note 3) Symbol VF IR Reverse Recovery Time trr Softness Factor Reverse Recovery Current Reverse Recovery Charges Junction Capacitance Notes: S IRM Qrr CJ Min - Typ 2.5 0.2 - Max 3.0 10 23 - - 35 - 0.7 3.6 135 30 - Unit V μA ns A nC pF Test Condition IF = 6A, TJ = 25ºC VR = 600V, TJ = 25ºC IF = 0.5A, IR = 1A, IRR = 0.25A IF = 1A, VR = 30V, di/dt = 50A/µs IF = 6A, dl/dt = 200A/µs, VR = 400V, TJ = 125ºC VR = 4.0V, 1MHz 3. Short duration pulse test used to minimize self-heating effect. 4. FR-4 PCB, 2oz. Copper, minimum recommended pad layout per http://www.diodes.com. 5. Polymide PCB, 2oz. Copper. Cathode pad dimensions 18.8mm x 14.4mm. Anode pad dimensions 5.6mm x 14.4mm. IF, INSTANTANEOUS FORWARD CURRENT (A) 6 PD, POWER DISSIPATION (W) NEW PRODUCT Maximum Ratings @TA = 25°C unless otherwise specified 5 4 TJ = 175°C 3 2 1 0 0 1 2 3 4 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 1 Forward Power Dissipation 5 100 T A = 125°C 10 T A = 150°C 1 TA = 25° C 0.1 TA = 85°C 0.01 0.001 0.0001 0 0.5 1.0 1.5 2.0 2.5 VF, INSTANTANEOUS FORWARD VOLTAGE(V) Fig. 2 Typical Forward Characteristics POWERDI is a registered trademark of Diodes Incorporated. 2 of 5 DSR6V600P5 September 2011 Document number: DS35211 Rev. 4 - 2 © Diodes Incorporated www.diodes.com TA = 150 °C CT, JUNCTION CAPACITANCE (pF) IR, INSTANTANEOUS REVERSE CURRENT (µA) 1000 1000 100 T A = 125°C 10 TA = 85°C 100 1 TA = 25°C 0.1 0.01 0 10 0.1 100 200 300 400 500 600 VR, INSTANTANEOUS REVERSE VOLTAGE(V) Fig. 3 Typical Reverse Characteristics 9 1 10 100 VR, DC REVERSE VOLTAGE(V) Fig. 4 Total Capacitance vs. Reverse Voltage 175 TA, DERATED AMBIENT TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (A) NEW PRODUCT DSR6V600P5 8 7 Based on Lead Temp (TL) 6 5 4 3 2 1 Note 5 0 25 50 75 100 125 150 TL, LEAD TEMPERATURE (°C) Fig. 5 Forward Current Derating Curve 175 150 125 100 75 50 25 0 0 120 240 360 480 VR, DC REVERSE VOLTAGE (V) Fig. 6 Operating Temperature Derating 600 POWERDI is a registered trademark of Diodes Incorporated. 3 of 5 DSR6V600P5 September 2011 Document number: DS35211 Rev. 4 - 2 © Diodes Incorporated www.diodes.com DSR6V600P5 NEW PRODUCT Package Outline Dimensions A ® D D2 A2 b2 L E E2 E1 W L1 e b1 b1 A2 POWERDI 5 Dim Min Max A 1.05 1.15 A2 0.33 0.43 b1 0.80 0.99 b2 1.70 1.88 D 3.90 4.05 D2 3.054 Typ E 6.40 6.60 e 1.84 Typ E1 5.30 5.45 E2 3.549 Typ L 0.75 0.95 L1 0.50 0.65 W 1.10 1.41 All Dimensions in mm Suggested Pad Layout X Dimensions C G X X1 Y Y1 Y X1 (2x) Value (in mm) 1.840 0.852 3.360 1.390 4.860 1.400 G Y1 (2x) C POWERDI is a registered trademark of Diodes Incorporated. 4 of 5 DSR6V600P5 September 2011 Document number: DS35211 Rev. 4 - 2 © Diodes Incorporated www.diodes.com DSR6V600P5 NEW PRODUCT IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDING TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2011, Diodes Incorporated www.diodes.com POWERDI is a registered trademark of Diodes Incorporated. 5 of 5 DSR6V600P5 September 2011 Document number: DS35211 Rev. 4 - 2 © Diodes Incorporated www.diodes.com