Two-Way Power Divider, 400 KHz - 400 MHz Features • • • • • • • DS-/DSS-113 V3 FP-2 (DS-113) Fully Hermetic Package (DSS-113) Three Decade Bandwidth Low Loss: 0.25 dB Typical Impedance: 50 Ohms Nominal Maximum Power Rating or Input Power: 1W Max. Internal Load Dissipation: 0.05 W Max. MIL-STD-202 Screening Available Description A Power Divider is ideally a lossless reciprocal device which can also perform vector summation of two or more signals and thus is sometimes called a power combiner or summer. SF-1 (DSS-113) Pin Configuration (DS-113) Pin No. Function Pin No. Function 1 Σ 5 GND 2 GND 6 GND 3 GND 7 GND 4 Output C 8 Output D Pin Configuration (DSS-113) Pin No. Function Pin No. Function 1 Σ 3 GND 2 Output C 4 Output D 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Two-Way Power Divider, 400 KHz - 400 MHz DS-/DSS-113 V3 DS-113 Electrical Specifications1: TA = -55°C to +85°C Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss Less Coupling 0.4 - 400 MHz dB — — 0.75 Isolation — 0.4 - 400 MHz dB 25 — — Amplitude Balance — 0.4 - 400 MHz dB — — 0.15 Phase Balance — 0.4 - 400 MHz ° — — 1.0 VSWR All Ports 0.4 - 400 MHz Ratio — — 1.5:1 DSS-113 Electrical Specifications1: TA = -55°C to +85°C Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss Less Coupling 0.4 - 400 MHz dB — — 0.75 Isolation — 0.4 - 400 MHz dB 25 — — Amplitude Balance — 0.4 - 400 MHz dB — — 0.15 Phase Balance — 0.4 - 400 MHz ° — — 1.5 VSWR All Ports 0.4 - 400 MHz Ratio — — 1.6:1 1. All specifications apply with 50 ohm source and load impedance. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Two-Way Power Divider, 400 KHz - 400 MHz DS-/DSS-113 V3 Typical Performance Curves Insertion Loss VSWR Isolation Ordering Information Part Number Package DS-113 PIN FP-2 DSS-113 PIN SF-1 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.