Murata DSS6NC52A221Q55B Leaded emifil (three-terminal capacitor type) small type Datasheet

Noise Suppression Products/EMI Suppression Filters > Leaded EMIFILr (Three-terminal Capacitor type) > Small Type
Data Sheet
1
Leaded EMIFILr (Three-terminal Capacitor type)
Small Type
DSN6/DSS6 Series
DSN6 Series
c Dimensions
c Insertion Loss Characteristics (Main Items)
(50Ω - 50Ω)
2.54 max.
7.0 max.
0
1
2
Insertion Loss (dB)
8.0 max.
I
Q55 Type: 25.0 min.
Q56 Type: 6.0±1.0
Q54 Type: 4.0±0.5
I
2.5±0.5
5.0±0.5
8
20
7
6
5
4
3
1: 22pF
2: 33pF
3: 47pF
4: 100pF
5: 270pF
6:1000pF
7: 2200pF
8: 10000pF
40
60
80
100
ø0.6
120
0.1
1
10
100
1000
GND
Frequency (MHz)
(in mm)
c Rated Value (p: lead type/packaging code)
Part Number
Capacitance
Rated Voltage
Operating
Temperature Range
Rated Current
DSN6NC51H220p
22pF ±20%
50Vdc
6A
-25 to +85°C
DSN6NC51H330p
33pF ±20%
50Vdc
6A
-25 to +85°C
DSN6NC51H470p
47pF ±20%
50Vdc
6A
-25 to +85°C
DSN6NC51H101p
100pF ±20%
50Vdc
6A
-25 to +85°C
DSN6NC51H271p
270pF ±20%
50Vdc
6A
-25 to +85°C
DSN6NC51H102p
1000pF ±20%
50Vdc
6A
-25 to +85°C
DSN6NC51H222p
2200pF ±20%
50Vdc
6A
-25 to +85°C
DSN6NZ81H103p
10000pF 80/-20%
50Vdc
6A
-25 to +85°C
DSS6 Series Straight Type
c Dimensions
c Insertion Loss Characteristics (Main Items)
2.54 max.
8.0 max.
*2
(50Ω - 50Ω)
0
5.0±0.5
I
Q55 Type: 25.0 min.
Q56 Type: 6.0±1.0
Q54 Type: 4.0±0.5
1
20
Insertion Loss (dB)
I
2.5±0.5
2
7.0 max.
*1
11
10
9
8
5 4
3
40
7
60
6
1: 22pF
2: 33pF
3: 47pF
4: 100pF
5: 150pF
6: 220pF
7: 270pF
8: 470pF
9: 1000pF
10: 2200pF
11: 10000pF
80
100
ø0.6
GND
(in mm)
*1 There may be a hole on the top of ferrite beads,
which causes no characteristics deterioration.
*2 The bottom of the ferrite beads may not be level with each other.
120
0.1
1
10
100
1000
Frequency (MHz)
Continued on the following page.
oThis data sheet is applied for Lead EMIFILr Capacitor Type used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.5.9
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > Leaded EMIFILr (Three-terminal Capacitor type) > Small Type
Data Sheet
2
Continued from the preceding page.
c Rated Value (p: lead type/packaging code)
Capacitance
Rated Voltage
Rated Current
Operating
Temperature Range
DSS6NC52A220p
22pF ±20%
100Vdc
6A
-25 to +85°C
DSS6NC52A330p
33pF ±20%
100Vdc
6A
-25 to +85°C
DSS6NC52A470p
47pF ±20%
100Vdc
6A
-25 to +85°C
DSS6NC52A101p
100pF ±20%
100Vdc
6A
-25 to +85°C
DSS6NC52A151p
150pF ±20%
100Vdc
6A
-25 to +85°C
DSS6NC52A221p
220pF ±20%
100Vdc
6A
-25 to +85°C
DSS6NC52A271p
270pF ±20%
100Vdc
6A
-25 to +85°C
DSS6NC52A471p
470pF ±20%
100Vdc
6A
-25 to +85°C
DSS6NC52A102p
1000pF ±20%
100Vdc
6A
-25 to +85°C
DSS6NE52A222p
2200pF 80/-20%
100Vdc
6A
-25 to +85°C
DSS6NZ82A103p
10000pF ±30%
100Vdc
6A
-25 to +85°C
Part Number
DSS6 Series Incrimp Type
c Dimensions
c Insertion Loss Characteristics (Main Items)
2.54 max.
8.0 max.
*2
10.0 max.
0
Insertion Loss (dB)
I
2
20
*1
2.5±0.5
1
I
T51 Type: 25.0 min.
T41 Type: 4.0±0.5
11
10
9
8
5
4
3
1: 22pF
2: 33pF
3: 47pF
4: 100pF
5: 150pF
6: 220pF
7: 270pF
8: 470pF
9: 1000pF
10: 2200pF
11: 10000pF
40
7 6
60
80
5.0±0.5
100
ø0.6
120
GND
(in mm)
*1 There may be a hole on the top of ferrite beads,
which causes no characteristics deterioration.
*2 The bottom of the ferrite beads may not be level with each other.
0.1
1
10
100
1000
Frequency (MHz)
c Rated Value (p: lead type/packaging code)
Capacitance
Rated Voltage
Rated Current
Operating
Temperature Range
DSS6NC52A220p
22pF ±20%
100Vdc
6A
-25 to +85°C
DSS6NC52A330p
33pF ±20%
100Vdc
6A
-25 to +85°C
DSS6NC52A470p
47pF ±20%
100Vdc
6A
-25 to +85°C
DSS6NC52A101p
100pF ±20%
100Vdc
6A
-25 to +85°C
DSS6NC52A151p
150pF ±20%
100Vdc
6A
-25 to +85°C
DSS6NC52A221p
220pF ±20%
100Vdc
6A
-25 to +85°C
DSS6NC52A271p
270pF ±20%
100Vdc
6A
-25 to +85°C
DSS6NC52A471p
470pF ±20%
100Vdc
6A
-25 to +85°C
DSS6NC52A102p
1000pF ±20%
100Vdc
6A
-25 to +85°C
DSS6NE52A222p
2200pF 80/-20%
100Vdc
6A
-25 to +85°C
DSS6NZ82A103p
10000pF ±30%
100Vdc
6A
Part Number
-25 to +85°C
Continued on the following page.
oThis data sheet is applied for Lead EMIFILr Capacitor Type used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.5.9
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > Leaded EMIFILr (Three-terminal Capacitor type) > Small Type
Data Sheet
3
Continued from the preceding page.
c Equivalent Circuit
c Equivalent Circuit
DSN6 Series
DSS6 Series
GND
GND
No polarity.
No polarity.
c Packaging
Minimum Quantity
Minimum Order Quantity (order in sets only) (Pcs.)
Part Number
Ammo Pack
ø320mm
Paper reel
2000
—
DS 6 Series
Bulk (Bag)
250 Q55/T51
500 Q54/Q56/T41
Lead Type/Packaging
Code
Lead Type
Lead Length* (in mm)
Packaging
Series
Q55B
25.0 min.
All series
Q50B
4.0±0.5
DST9N/H
Q52B
Straight
6.0±1.0
Q54B
4.0±0.5
Q56B
6.0±1.0
T41B
T51B
Incrimp
4.0±0.5
20.0±1.0
Q92J
16.5±1.0
Q93J
18.5±1.0
Straight
16.5±1.0
Q93A
18.5±1.0
U21A
U31A
Incrimp
Paper Reel (ø320mm) DSS9N/H
20.0±1.0
Q92A
DSN6/9, DSS6/9
DSS6N
25.0 min.
Q91J
Q91A
DST9N
Bulk
DSp6, DSN9N/H
Ammo Pack
16.5±1.0
All series except DSS9N/H
DSS6N
18.5±1.0
*Lead Distance between Reference and Bottom Planes except Bulk.
Continued on the following page.
oThis data sheet is applied for Lead EMIFILr Capacitor Type used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.5.9
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > Leaded EMIFILr (Three-terminal Capacitor type) > Small Type
Data Sheet
4
Continued from the preceding page.
c Caution · Notice
!Caution
o Rating
Do not use products beyond the rated current and rated voltage as this
may create excessive heat and deteriorate the insulation resistance.
o Soldering and Mounting
1. Mounting holes should be designed as specified in these
specifications. Other designs than those shown in these
specifications may cause cracks in ceramics that may
lead to smoking or firing.
2. DSN9/DST9/DSN9H/DST9H/VFS9V Series
Mounting for PCB. (Applis only to bulk type.)
The form of the mounting hole of the bulk item is a triangle.
The product should be inserted and soldered to each hole in
the correct way as in Fig.2. (The center terminal and the other
terminals become parallel when viewing the product from the
side.) Smoking and firing maybe caused by incorrect mounting
as in Fig.3. (The center terminal and the other terminals cross
when viewing the product from the side.)
Marking Side
Center Terminal
(Ground Terminal)
Fig.2 Right Way
Fig.3 Wrong Way
Continued on the following page.
oThis data sheet is applied for Lead EMIFILr Capacitor Type used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.5.9
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > Leaded EMIFILr (Three-terminal Capacitor type) > Small Type
Data Sheet
5
Continued from the preceding page.
Notice
o Storage and Operating Conditions
<Operating Environment>
1. Do not use products in a chemical atmosphere such
as chlorine gas, acid or sulfide gas.
2. Do not use products near water, oil or organic
solvents. Avoid environments where dust or dirt may
adhere to the product.
<Storage and Handling Requirements>
1. Storage Period
Use the products within 12 months after delivery.
Solderability should be checked if this period is
exceeded.
2. Storage Conditions
(1) Storage temperature: -10 to 40 degrees C
Relative humidity: 15 to 85%
Avoid sudden changes in temperature and humidity.
(2) Do not store products in a chemical atmosphere
such as chlorine gas, acid or sulfide gas.
(3) When restoring taping type (BL01RN1A1F1J),
please attach the spacer between the flanges of the
reel. The spacer is corrugated paper that is attached
when shipping.
<Using EMIGUARDr effectively>
1. Terminal (with mark) should be properly connected to
the line of incoming electrostatic surge. (There is
polarity.) Otherwise, no effect in ESD suppression can
be expected (VFR3V).
Example of input terminal
Incoming
Electrostatic Surges
Example of output terminal
Incoming
Electrostatic Surges
2. Products should be used at rated voltage or less and
rated current or less.
3. Products should not be applied for the absorption of
surges that have large energy (e.g., induced lightning
surges, switching surges) because it is designed for the
absorption of electrostatic surges (VFR3V).
4. Electrostatic testing should be done on the following
conditions (VFR3V).
N s ; # 2 s 62 ]2 < 8.0 x105
n: Times applied
C: Charging Capacitance (pF)
V: Testing Voltage (kV)
R: Charging Resistance (Ω)
o Soldering and Mounting
1. Washing
Failure and degradation of a product are caused
by the washing method. When you wash in conditions
that are not in the mounting information, please contact
Murata engineering.
2. Soldering
Reliability decreases with improper soldering
methods. Please solder by the standard soldering
conditions shown in the mounting information.
3. Other
Noise suppression levels resulting from Murata's
EMI suppression filters EMIFILr may vary, depending
on the circuits and ICs used, type of noise, mounting
pattern, lead wire length, mounting location, and other
operating conditions. Be sure to check and confirm in
advance the noise suppression effect of each filter, in
actual circuits, etc. before applying the filter in a
commercial-purpose equipment design.
oThis data sheet is applied for Lead EMIFILr Capacitor Type used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.5.9
http://www.murata.com/
Similar pages