Rohm DTB113ZK Pnp -500ma -50v digital transistors (bias resistor built-in transistors) Datasheet

DTB113ZK
PNP -500mA -50V Digital Transistors
Datasheet
(Bias Resistor Built-in Transistors)
lOutline
Parameter
Value
VCC
-50V
-500mA
1kW
10kW
IC(MAX.)
R1
R2
SMT3
OUT
IN
GND
DTB113ZK
SOT-346 (SC-59)
lFeatures
lInner circuit
1) Built-In Biasing Resistors
2) Built-in bias resistors enable the configuration of
an inverter circuit without connecting external
input resistors (see inner circuit).
3) The bias resistors consist of thin-film resistors
with complete isolation to allow negative biasing
of the input. They also have the advantage of
completely eliminating parasitic effects.
4) Only the on/off conditions need to be set for
operation, making the circuit design easy.
5) Complementary NPN Types :DTD113ZK/ DTD113ZU
6) Lead Free/RoHS Compliant.
lApplication
Switching circuit, Inverter circuit, Interface circuit,
Driver circuit
lPackaging specifications
Part No.
DTB113ZK
Package
Package
size
(mm)
Taping
code
SMT3
2928
T146
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
1/5
Basic
Reel size Tape width
ordering
(mm)
(mm)
unit (pcs)
180
8
3,000
Marking
G11
2012.07 - Rev.C
Data Sheet
DTB113ZK
lAbsolute maximum ratings (Ta = 25°C)
Parameter
Symbol
Values
Unit
Supply voltage
VCC
-50
V
Input voltage
VIN
-10 to +5
V
Collector current
IC(MAX.)*1
-500
mA
Power dissipation
PD *2
200
mW
Tj
150
°C
Tstg
-55 to +150
°C
Junction temperature
Range of storage temperature
lElectrical characteristics(Ta = 25°C)
Parameter
Input voltage
Output voltage
Input current
Output current
Symbol
Conditions
Min.
Typ.
Max.
Unit
VI(off)
VCC = -5V, IO = -100mA
-
-
-0.3
VI(on)
VO = -0.3V, IO = -20mA
-3.0
-
-
VO(on)
IO / II = -50mA / -2.5mA
-
-0.1
-0.3
V
VI = -5V
-
-
-7.2
mA
VCC = -50V, VI = 0V
-
-
-0.5
mA
56
-
-
-
II
IO(off)
VO = -5V, IO = -50mA
V
DC current gain
GI
Input resistance
R1
-
0.7
1.0
1.3
kW
Resistance ratio
R2/R1
-
8
10
12
-
-
200
-
MHz
Transition frequency
fT *1
VCE = -10V, IE = 50mA,
f = 100MHz
*1 Characteristics of built-in transistor
*2 Each terminal mounted on a reference footprint
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
2/5
2012.07 - Rev.C
Data Sheet
DTB113ZK
lElectrical characteristic curves(Ta = 25°C)
Fig.2 Output current vs. input voltage
(OFF characteristics)
INPUT VOLTAGE : VI(on) [V]
OUTPUT CURRENT : IO [A]
Fig.1 Input voltage vs. output current
(ON characteristics)
OUTPUT CURRENT : IO [mA]
INPUT VOLTAGE : VI(off)[V]
Fig.4 DC current gain vs. output current
Fig.3 Output current vs. output voltage
II= -5.0mA
-500
-4.5mA -4.0mA
-3.5mA
-3.0mA
Ta=25ºC
-2.0mA
-1.5mA
-300
-1.0mA
-200
-0.5mA
-100
DC CURRENT GAIN : GI
OUTPUT CURRENT : IO [mA]
-2.5mA
-400
0A
0
0
-2
-4
-6
-8
-10
OUTPUT CURRENT : IO [mA]
OUTPUT VOLTAGE : VO [V]
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
3/5
2012.07 - Rev.C
Data Sheet
DTB113ZK
lElectrical characteristic curves(Ta = 25°C)
OUTPUT VOLTAGE : VO(on) [V]
Fig.5 Output voltage vs. output current
OUTPUT CURRENT : IO [mA]
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
4/5
2012.07 - Rev.C
Data Sheet
DTB113ZK
lDimensions (Unit : mm)
D
SMT3
A
c
Lp
L1
E
HE
Q
e
A3
b
x
S A
A1
l1
A
e1
e
S
b2
Patterm of terminal position areas
DIM
A
A1
A3
b
c
D
E
e
HE
L1
Lp
Q
x
y
MILIMETERS
MIN
MAX
1.00
1.30
0.00
0.10
0.25
0.35
0.50
0.09
0.25
2.80
3.00
1.50
1.80
0.95
2.60
3.00
0.30
0.60
0.40
0.70
0.20
0.30
0.10
0.10
DIM
e1
b2
l1
INCHES
MIN
0
MAX
0.051
0.004
0.01
0.014
0.004
0.11
0.059
0.02
0.01
0.118
0.071
0.04
0.102
0.012
0.016
0.008
-
MILIMETERS
MIN
MAX
2.10
0.60
0.90
0.118
0.024
0.028
0.012
0.004
0.004
INCHES
MIN
MAX
0.08
-
0.024
0.035
Dimension in mm/inches
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
5/5
2012.07 - Rev.C
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
R1120A
Similar pages