UNISONIC TECHNOLOGIES CO., LTD DTC115E NPN EPITAXIAL SILICON TRANSISTOR NPN DIGITAL TRANSISTOR (BUILT-IN RESISTORS) 3 FEATURES 2 * Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors. * The bias resistors consist of thin-film resistors with complete isolation to allow positive biasing of the input They also have the advantage of almost completely eliminating parasitic effects. * Only the on / off conditions need to be set for operation, making device design easy. 1 SOT-23 3 2 1 SOT-523 *Pb-free plating product number: DTC115EL ORDERING INFORMATION Order Number Normal Lead Free Plating DTC115E-AE3-6-R DTC115EL-AE3-6-R DTC115E-AN3-6-R DTC115EL-AN3-6-R DTC115EL-AE3-6-R Package SOT-23 SOT-523 (1)Packing Type (2)Pin Assignment (3)Package Type (4)Lead Plating Pin Assignment 1 2 3 G I O G I O Packing Tape Reel Tape Reel (1) R: Tape Reel (2) refer to Pin Assignment (3) AE3: SOT-23, AN3: SOT-523 (4) L: Lead Free Plating, Blank: Pb/Sn MARKING INFORMATION CB5 www.unisonic.com.tw Copyright © 2005 Unisonic Technologies Co., Ltd 1 of 2 QW-R206-055,B DTC115E NPN EPITAXIAL SILICON TRANSISTOR ABSOLUTE MAXIMUM RATING ( Ta=25℃ ) PARAMETER SYMBOL VCC VIN IOUT IC(MAX) RATINGS UNIT 50 V -10 ~ +40 V 20 Output Current mA 100 SOT-23 200 mW Power Dissipation PD SOT-523 150 mW Junction Temperature TJ +150 ℃ Storage Temperature TSTG -40 ~ +150 ℃ Note Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. Supply Voltage Input Voltage ELECTRICAL CHARACTERISTICS (Ta=25℃, unless otherwise specified) PARAMETER SYMBOL VI(OFF) Input Voltage VI(ON) Output Voltage VOUT(ON) Input Current IIN Output Current IO(OFF) DC Current Gain GI Input Resistance R1 Resistance Ratio R2/R1 Transition Frequency fT *Transition frequency of the device TEST CONDITIONS VCC=5V, IOUT=100µA VOUT=0.3V, IOUT=1mA IOUT=5 mA, IIN=0.25mA VIN= 5V VCC=50V, VIN=0V VOUT= 5V, IOUT= 5mA VCE=10V, IE=-5mA, f=100MHz * MIN 3 82 70 0.8 TYP MAX UNIT 0.5 V 0.1 0.3 0.15 0.5 V mA µA 100 1 250 130 1.2 kΩ MHz EQUIVALENT CIRCUIT OUT R1 IN R2 GND IN OUT GND UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 2 QW-R206-055,B