Part Number: www.SunLED.com DUY57A 56.9mm (2.3”) SINGLE DIGIT NUMERIC DISPLAY Features ● 2.3 INCH DIGIT HEIGHT. ● LOW CURRENT OPERATION. ● EXCELLENT CHARACTER APPEARANCE. ● HIGH LIGHT OUTPUT. ● EASY MOUNTING ON P.C. BOARDS OR SOCKETS. ● MULTICOLOR AVAILABLE. ● MECHANICALLY RUGGED. ● STANDARD: GRAY FACE, WHITE SEGMENT. ● RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. Operating Characteristics (TA=25°C) 3.Specifications are subject to change without notice. Forward Voltage (Typ.) Absolute Maximum Ratings (TA=25°C) UY (GaAsP/GaP) Unit VR 20(10) V IF 30(30) mA Per Segment Or ( DP) (IF=10mA) Forward Voltage (Max.) Reverse Voltage Per Segment Or ( DP) Forward Current Per Segment Or ( DP) Per Segment Or ( DP) (IF=10mA) Reverse Current Per Segment Or (Dp) (VR=20(10)V) Forward Current (peak) Per Segment Or ( DP) 1/10Duty Cycle 0.1ms Pulse Width Power Dissipation Per Segment Or ( DP) Operating Temperature Storage Temperature DUY57A VF 7.8(3.9) V VF 10(5.0) V IR 10(10) uA iFS 140(140) mA Wavelength Of Peak Emission (Typ.) (IF=10mA) λP 590 nm PT 300(150) mW λD 588 nm TA -40 ~ +85 Wavelength Of Dominant Emission (Typ.) (IF=10mA) Tstg -40 ~ +85 Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Δλ 35 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 20 pF Lead Solder Temperature [2mm Below Package Base] Part Number UY Unit (GaAsP/GaP) Emitting Color Yellow Published Date : MAR 04, 2008 °C 260°C For 3~ 5 Seconds Emitting Material GaAsP/GaP Luminous Intensity (IF=10mA) ucd min. typ. 8000 26490 Drawing No : SDSA2170 Wavelength nm λP 590 V4 Description Common Anode,Rt.Hand Decimal Checked : Shin Chi P.1/5 Part Number: www.SunLED.com DUY57A 56.9mm (2.3”) SINGLE DIGIT NUMERIC DISPLAY UY Published Date : MAR 04, 2008 Drawing No : SDSA2170 V4 Checked : Shin Chi P.2/5 Part Number: www.SunLED.com Published Date : MAR 04, 2008 DUY57A 56.9mm (2.3”) SINGLE DIGIT NUMERIC DISPLAY Drawing No : SDSA2170 V4 Checked : Shin Chi P.3/5 Part Number: www.SunLED.com DUY57A 56.9mm (2.3”) SINGLE DIGIT NUMERIC DISPLAY Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 04, 2008 Drawing No : SDSA2170 V4 Checked : Shin Chi P.4/5 Part Number: www.SunLED.com 56.9mm (2.3”) SINGLE DIGIT NUMERIC DISPLAY PACKING & LABEL SPECIFICATIONS Published Date : MAR 04, 2008 DUY57A Drawing No : SDSA2170 DUY57A V4 Checked : Shin Chi P.5/5