Part Number: www.SunLED.com DUY57A-A 57mm (2.3”) SINGLE DIGIT NUMERIC DISPLAY Features ●2.3 INCH DIGIT HEIGHT. ●LOW CURRENT OPERATION. ●EXCELLENT CHARACTER APPEARANCE. ●HIGH LIGHT OUTPUT. ●EASY MOUNTING ON P.C. BOARDS OR SOCKETS. ●MULTICOLOR AVAILABLE. ●MECHANICALLY RUGGED. ●GRAY FACE, WHITE SEGMENT. ●RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) UY (GaAsP/GaP) Operating Characteristics (TA=25°C) Unit UY (GaAsP/GaP) Unit Forward Voltage (Typ.) Per Segment or (DP) (IF=10mA) VF 7.8 (3.9) V VR 20 (10) V Forward Current Per Segment or (DP) IF 30 (30) mA Forward Voltage (Max.) Per Segment or (DP) (IF=10mA) VF 10.0 (5.0) V Forward Current (Peak) Per Segment or (DP) 1/10 Duty Cycle 0.1ms Pulse Width iFS 140 (140) mA Reverse Current Per Segment or (DP) (VR=20(10)V) IR 10 uA Power Dissipation Per Segment or (DP) PT 300 (150) mW Wavelength of Peak Emission (Typ.) (IF=10mA) λP 590 nm Operating Temperature TA -40 ~ +85 Wavelength of Dominant Emission (Typ.) (IF=10mA) λD 588 nm Tstg -40 ~ +85 Spectral Line Full Width At Half-Maximum(Typ.) (IF=10mA) Δλ 35 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 20 pF Reverse Voltage Per Segment or (DP) Storage Temperature Lead Solder Temperature [2mm Below Package Base] Part Number DUY57A-A Emitting Color Yellow Published Date : MAR 04,2008 °C 260°C For 3~5 Seconds Emitting Material GaAsP/GaP Luminous Intensity (IF=10mA) ucd min. typ. 8000 26490 Drawing No : SDSA2169 Wavelength nm λP Description 590 Common Anode. Rt. Hand Decimal V4 Checked : Shin Chi P.1/5 Part Number: www.SunLED.com DUY57A-A 57mm (2.3”) SINGLE DIGIT NUMERIC DISPLAY UY Published Date : MAR 04,2008 Drawing No : SDSA2169 V4 Checked : Shin Chi P.2/5 Part Number: www.SunLED.com DUY57A-A 57mm (2.3”) SINGLE DIGIT NUMERIC DISPLAY Published Date : MAR 04,2008 Drawing No : SDSA2169 V4 Checked : Shin Chi P.3/5 Part Number: www.SunLED.com DUY57A-A 57mm (2.3”) SINGLE DIGIT NUMERIC DISPLAY Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity/ luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 04,2008 Drawing No : SDSA2169 V4 Checked : Shin Chi P.4/5 Part Number: www.SunLED.com DUY57A-A 57mm (2.3”) SINGLE DIGIT NUMERIC DISPLAY PACKING & LABEL SPECIFICATIONS Published Date : MAR 04,2008 Drawing No : SDSA2169 DUY57A-A V4 Checked : Shin Chi P.5/5