PD01S/D series 1W DC/DC CONVERTER, SIP-Package, High Isolation FEATURES Efficiency up to 81% SIP Package with Industry Standard Pinout Package Dimension: 5V&12V Models: 19.5 x 10.2 x 6.1 mm (0.77”x 0.4”x 0.24”) 15V&24V Models: 19.5 x 10.2 x 7.1 mm (0.77”x 0.4”x 0.28”) High Isolation Voltage 3000 VDC Operating Temperature Range -40°C to +85°C Single and Dual Outputs >2 MHours MTBF 3 Years Product Warranty The PD01S/D series are miniature, SIP Package, isolated 1W DC/DC converters with 3,000VDC isolation. It offers short circuit protection and allows a wide operating temperature range of –40°C to +85°C. These isolated DC/DC converters are the latest offering from a world leader in power systems technology and manufacturing ― Delta Electronics, Inc Model List Model Number PD01S0503A PD01S0505A PD01S0509A PD01S0512A PD01S0515A PD01D0505A PD01D0509A PD01D0512A PD01D0515A PD01S1203A PD01S1205A PD01S1209A PD01S1212A PD01S1215A PD01D1205A PD01D1209A PD01D1212A PD01D1215A PD01S2403A PD01S2405A PD01S2409A PD01S2412A PD01S2415A PD01D2405A PD01D2409A PD01D2412A PD01D2415A Input Voltage (Range) Output Voltage Max. Min. VDC VDC mA mA mA(typ.) 3.3 5 9 12 15 ±5 ±9 ±12 ±15 3.3 5 9 12 15 ±5 ±9 ±12 ±15 3.3 5 9 12 15 ±5 ±9 ±12 ±15 260 200 110 84 67 ±100 ±56 ±42 ±34 260 200 110 84 67 ±100 ±56 ±42 ±34 260 200 110 84 67 ±100 ±56 ±42 ±34 5 4 2 1.5 1 ±2 ±1 ±0.8 ±0.7 5 4 2 1.5 1 ±2 ±1 ±0.8 ±0.7 5 4 2 1.5 1 ±2 ±1 ±0.8 ±0.7 235 281 260 258 258 278 262 258 258 96 114 106 105 104 113 106 104 105 49 59 54 54 53 58 55 53 53 5 (4.5 ~ 5.5) 12 (10.8 ~ 13.2) 24 (21.6 ~ 26.4) Output Current Input Current Load Max. capacitive Regulation Load @Max. Load @No Load mA(typ.) 30 12 7 Efficiency (typ.) @Max. Load % (max.) VDC 10 10 8 7 7 10 8 7 7 8 8 5 5 5 8 5 5 5 8 8 5 5 5 8 5 5 5 73 71 76 78 78 72 77 78 79 74 73 78 80 80 74 79 81 81 73 71 76 78 79 72 76 79 80 220 100* 220 100* 220 100* * For each output DS_PD01S/D_03152012 E-mail: [email protected] http://www.delta.com.tw/dcdc P1 Input Characteristics Parameter Input Voltage Range Input Surge Voltage (1 sec. max.) Model 5V Input Models 12V Input Models 24V Input Models 5V Input Models 12V Input Models 24V Input Models Reverse Polarity Input Current Input Filter Internal Power Dissipation Min. 4.5 10.8 21.6 -0.7 -0.7 -0.7 --- All Models --- Typ. Max. 5 5.5 12 13.2 24 26.4 --9 --18 --30 --0.3 Internal Capacitor --450 Unit VDC A mW Output Characteristics Parameter Output Voltage Accuracy Output Voltage Balance Line Regulation Load Regulation Ripple & Noise (20MHz) Ripple & Noise (20MHz) Ripple & Noise (20MHz) Temperature Coefficient Short Circuit Protection Conditions Dual Output, Balanced Loads For Vin Change of 1% Io=20% to 100% Min. ------- Over Line, Load & Temp. --------- Typ. Max. ±1.0 ±3.0 ±0.1 ±1.0 ±1.2 ±1.5 See Model Selection Guide 65 100 --150 --15 ±0.01 ±0.02 0.5 Second Max. Unit % % % mV P-P mV P-P mV rms %/℃ General Characteristics Parameter I/O Isolation Voltage (rated) I/O Isolation Resistance I/O Isolation Capacitance Switching Frequency MTBF (calculated) Conditions 60 Seconds 500 VDC 100KHz, 1V MIL-HDBK-217F@25℃, Ground Benign Min. 3000 10 --70 2,000,000 Typ. ----60 100 ----- Max. ----100 120 ----- Unit VDC GΩ pF KHz Hours Recommended Outside Input Fuse 5V Input Models 12V Input Models 24V Input Models 500mA Slow-Blow Type 200mA Slow-Blow Type 100mA Slow-Blow Type Environmental Specifications Parameter Operating Temperature Range (with Derating) Case Temperature Storage Temperature Range Humidity (non condensing) Cooling Lead Temperature (1.5mm from case for 10Sec.) DS_PD01S/D_03152012 Conditions Ambient Min. Max. -40 +85 --+90 -50 +125 --95 Free-Air convection --260 Unit ℃ ℃ ℃ % rel. H ℃ E-mail: [email protected] http://www.delta.com.tw/dcdc P2 Power Derating Curve (3.3V, 5V & ±5V} (all other output) Notes 1 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted. 2 Ripple & Noise measurement bandwidth is 0-20MHz. 3 These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules; however they may not meet all specifications listed. 4 All DC/DC converters should be externally fused at the front end for protection. 5 Specifications subject to change without notice. Mechancial Drawing Mechanical Dimensions Pin Connections 10.2 [0.40] 3.2 0.5 [0.02] 2.35 [0.09] 2.54 7.62 2X2.54 [0.10] [0.30] [2X0.10] [0.13] 0.5 [0.02] 19.5 [0.77] Pin Single Output Dual Output 1 +Vin +Vin 2 -Vin -Vin 5 -Vout -Vout 6 No Pin Common 7 +Vout +Vout 5V&12V Input : T: 6.1mm(0.24 inch) 15V&24V Input: T: 7.1mm(0.28 inch) 18.5 [0.73] ►All dimensions in mm (inches) T Bottom View 0.50 [0.02] 5 6 7 ►Tolerance: X.X±0.25 (X.XX±0.01) X.XX±0.13 ( X.XXX±0.005) 0.25 [0.01] 2 ► Pins ±0.05(±0.002) 1.3 [0.05] 1 Physical Outline Case Size (5V&12V Input) Case Size(15V&24V Input) : : 19.5x6.1x10.2mm (0.77x0.24x0.40 Inches) 19.5x7.1x10.2mm (0.77x0.28x0.40 Inches) Non-Conductive Black Plastic (flammability to UL 94V-0 rated) Case Material : Weight (5V&12V Input) Weight (15V&24V Input) DS_PD01S/D_03152012 : : 2.2g 2.6g E-mail: [email protected] http://www.delta.com.tw/dcdc P3 Part Numbering System P D 01 S 05 05 A Form factor Family series Watt Number of Outputs Input Voltage Output Voltage Option Code D-DIP P-SIP S-SMD A~Z 01:1W 02:2W 03:3W 04:4W 06:6W 03:3.3V 05: 5V 12:12V 24: 24V 48:48V 03:3.3V 05: 5V 12:12V 15: 15V 24: 24V A - Std. Functions S - Single D- Dual WARRANTY Delta offers a three(3) years limited warranty. Complete warranty information is listed on our web site or is available upon request from Delta. Information furnished by Delta is believed to be accurate and reliable. However, no responsibility is assumed by Delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Delta. Delta reserves the right to revise these specifications at any time, without notice. DS_PD01S/D_03152012 E-mail: [email protected] http://www.delta.com.tw/dcdc P4