E Series Sealed Miniature Toggle Switches Features/Benefits • Sealed against solder and cleaning Typical Applications • Telecommunications • Instrumentation • Medical equipment process contaminants • • • • UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available Models Available Specifications Materials CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or DC max. Q contact material: E1XX & E2XX MODELS: 7.5 AMPS @ 125 V AC or 28 V DC; 3 AMPS @ 250 V AC. E3XX MODELS: 5 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC. See page F-25 for additional ratings. ELECTRICAL LIFE: E1XX and E2XX models: 40,000 make-and-break cycles at full load. E3XX models: 30,000 cycles. CONTACT RESISTANCE: Below 10 mΩ typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. ELECTROSTATIC DISCHARGE (ESD) OPTION: F1 conductive bushing only. Dissipates up to 20,000 V DC from actuator to ground. DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level. OPERATING TEMPERATURE: –30ºC to 85ºC. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). DEGREE OF PROTECTION: IP57; Protection against harmful dust deposit, full-scale voltage protection, temporary immersion. CASE & BUSHING: Glass filled nylon 6/6, flame retardant, heat stabilized (UL 94V-0). F1 conductive bushing option is impregnated with carbon fibers. ACTUATOR: Brass, chrome plated with internal o-ring seal standard. SWITCH SUPPORT: Brass or steel, matte-tin plated. SWITCH SUPPORT RETAINER: Stainless steel. CONTACTS & TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page F-29 for additional contact materials. TERMINAL SEAL: Epoxy. HARDWARE: Nut & Locking ring: Brass, nickel plated. Lockwasher: Steel, nickel plated. NOTE: Any models supplied with P, S, R, Q, B or G contact material are RoHS compliant and compatible. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages F–23 thru F–29. For additional options not shown in catalog, consult our Customer Service Center. All models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods. Switch Function E101 SP, On-None-On E103 SP, On-Off-On E105 SP, Mom.-Off-Mom. E107 SP, On-Off-Mom. E108 SP, On-None-Mom. E201 DP, On-None-On E203 DP, On-Off-On E205 DP, Mom.-Off-Mom. E207 DP, On-Off-Mom. E208 DP, On-None-Mom. E211 DP, On-On-On E213 DP, On-On-Mom. E215 DP, Mom.-On-Mom. E301 3P, On-None-On Toggle F * F1 available with SP and DP versions only, please see page F-24 Actuator M .300" high S .500" high L3 Plastic, .940" high Bushing D1 .250" high F1 Conductive, .250" high* D9 .280" high Y Threaded, .350" high Terminations Right angle, PC thru-hole A AV2 Vertical right angle, PC thru-hole C PC Thru-hole V3 .460" high, V-bracket Z Solder lug A3 Right angle, PC thru-hole AV3 Vertical right angle, PC thru-hole V6 .460" high, V-bracket V9 1.150" high, V-bracket V31 .460" high, snap-in V-bracket V61 .460" high, snap-in V-bracket W .750" long, wire wrap Z3 Quick connect Contact Material B Gold P Gold, matte-tin Q Silver S Silver, matte-tin G Gold over silver R Gold over silver, matte-tin Seal E Epoxy Dimensions are shown: Inches (mm) Specifications and dimensions subject to change F–22 www.ck-components.com E Series Sealed Miniature Toggle Switches SWITCH FUNCTION SWITCH FUNCTION POS. 1 POS. 2 POS. 3 NO. POLES SP MODEL NO. POS. 1 C&K marking on opposite side E101 ON NONE ON E103 ON OFF ON E105 MOM. OFF MOM. E107 ON OFF MOM. E108 ON NONE MOM. CONNECTED TERMINALS POS. 2 POS. 3 C&K marking on opposite side SCHEMATIC 2-3 N/A 2-1 2-3 OPEN 2-1 2-3 N/A 2-1 SPDT SPDT Terminal Numbers For Reference Only Part number shown: E101SD1CBE E201 ON NONE ON E203 ON OFF ON E205 MOM. OFF MOM. E207 ON OFF MOM. E208 ON NONE MOM. E211 ** ON ON ON E213** ON ON MOM. E215** MOM. ON MOM. 2-3,5-6 N/A 2-1,5-4 2-3,5-6 OPEN 2-1,5-4 2-3,5-6 N/A 2-1,5-4 2-3,5-6 2-3,5-4 2-1,5-4 DP DPDT DPDT Terminal Numbers For Reference Only Part number shown: E201SD1CBE MOM. = Momentary All models ** Wiring for 3-way switch, see Section N. with all options when ordered with G,R, Q or S contact material except with F1 conductive bushing. F Toggle Dimensions are shown: Inches (mm) Specifications and dimensions subject to change F–23 www.ck-components.com E Series Sealed Miniature Toggle Switches SWITCH FUNCTION SWITCH FUNCTION POS. 1 POS. 2 POS. 3 NO. POLES MODEL NO. C&K marking on opposite side E301 3P CONNECTED TERMINALS POS. 2 POS. 1 ON NONE POS. 3 C&K marking on opposite side ON 2-3,5-6,8-9 N/A SCHEMATIC 2-1,5-4,8-7 3PDT 3PDT Terminal Nos. For Reference Only Part number shown: E301SD1CBE MOM. = Momentary All models ** Wiring for 3-way switch, see Section N. with all options when ordered with G, R, Q or S contact material except with F1 conductive bushing. ACTUATOR COLOR ACTUATOR ACTUATOR M S .300" HIGH L3 .500" HIGH PLASTIC, .940" ? HIGH * * Gloss plastic OPTION CODE * 2 L3 ACTUATOR COLOR BLACK Chrome finish Standard when ordered with A, A3, AV2, AV3, V2-V61 terminations. Finish: Chrome. Other colors available, consult Customer Service Center. No color choice required for S & M actuators. Standard when ordered with C, Z, Z3, W & W4 terminations. Finish: Chrome * Actuators shown with standard D1 bushing. Subtract .030 (0,76) for D9 bushing. Subtract .100 (2,54) for Y bushing. BUSHING D1 F1 .250" HIGH, UNTHREADED D9 .280" HIGH, UNTHREADED Y THREADED, INSULATED, .350" HIGH WITH KEYWAY ESD CONDUCTIVE BUSHING, .250" HIGH, UNTHREADED F1 bushing is not UL/CSA approved 1/4-40 UNS-2A PANEL MOUNTING Toggle F ESD protection depends on proper grounding of switch support bracket. F1 conductive bushing option is impregnated with carbon fibers; dissipates electrostatic discharge (ESD) up to 20,000 V from actuator to ground. Available with M & S actuator options and A, A3, AV2, AV3, V3-V61 termination options. E3XX models not available with D9 bushing. NOTE: Internal o-ring actuator seal standard for all bushing options. Available only with C, Z, Z3, & W terminations. Available for 1&2 pole only. Hardware: One dress nut part number 299D01201, one hex nut part number 540400201 and lockwasher part number 700303202 supplied standard. Will withstand 4 in.-lbs. of torque with no distortion. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change F–24 www.ck-components.com E Series Sealed Miniature Toggle Switches TERMINATIONS Z C SOLDER LUG Not available with F1 conductive bushing or P, R or S contact material. SPDT thru 3PDT Z3 SPDT thru 3PDT PC MOUNTING Not available with F1 conductive bushing. QUICK CONNECT SPDT thru 3PDT A PC THRU-HOLE Not available with F1 conductive bushing or P, R or S contact material. Mating quick connector available; order part number 530100000, page F-26. RIGHT ANGLE, PC THRU-HOLE Actuator Shown In Pos. 1 SECTION A-A E101MD1ABE Terminal Nos. For Reference Only A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE PC MOUNTING Horizontal Actuation SPDT Not available with Y bushing. Terminal bend radii and lead-in manufacturing option. A RIGHT ANGLE, PC THRU-HOLE Actuator Shown In Pos. 1 SECTION A-A A3 Terminal Nos. For Reference Only RIGHT ANGLE, SNAP-IN, PC THRU-HOLE PC MOUNTING E201MD1ABE Horizontal Actuation DPDT F Toggle Not available with Y bushing. Terminal bend radii and lead-in manufacturing option. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change F–25 www.ck-components.com E Series Sealed Miniature Toggle Switches TERMINATIONS A RIGHT ANGLE, PC THRU-HOLE PC MOUNTING E301MD1ABE Horizontal Actuation Actuator Shown In Pos. 1 SECTION A-A 3PDT Terminal Nos. For Reference Only Not available with D9 & Y bushings. Terminal bend radii and lead-in manufacturing option. AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH E101MD1AV2BE Vertical Actuation Actuator Shown In Pos. 1 SECTION A-A SPDT AV3 PC MOUNTING VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH Not available with Y bushing. Terminal bend radii and lead-in manufacturing option. AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH E201MD1AV2BE Vertical Actuation SECTION A-A Actuator Shown In Pos. 1 PC MOUNTING DPDT A3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH Toggle F Not available with Y bushing. Terminal bend radii and lead-in manufacturing option. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change F–26 www.ck-components.com E Series Sealed Miniature Toggle Switches TERMINATIONS AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH E301MD1AV2BE Vertical Actuation AV3 3PDT SECTION A-A Actuator Shown In Pos. 1 PC MOUNTING VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE .150" PITCH Not available with D9 & Y bushings. Terminal bend radii and lead-in manufacturing option. V6 V61 VERTICAL MOUNT, V-BRACKET VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING E101MD1__BE SPDT SNAP-IN OPTION CODE DIM ‘A’ V6, V61 .460 (11,68) Actuator Shown In Pos. 1 Not available with Y bushing. V6 V61 VERTICAL MOUNT, V-BRACKET PC MOUNTING VERTICAL MOUNT, V-BRACKET, SNAP-IN E201MD1__BE DPDT SNAP-IN F DIM ‘A’ V6, V61 .460 (11,68) Actuator Shown In Pos. 1 Not available with Y bushing. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change F–27 www.ck-components.com Toggle OPTION CODE E Series Sealed Miniature Toggle Switches TERMINATIONS V3, V9 V31 VERTICAL MOUNT, V-BRACKET PC MOUNTING VERTICAL MOUNT, V-BRACKET, SNAP-IN OPTION CODE DIM ‘A’ SNAP-IN E101MD1__BE SPDT V3, V31 .460 (11,68) V9 1.150 (29,21) Actuator Shown In Pos. 1 Not available with Y bushing. V3, V9 V31 VERTICAL MOUNT, V-BRACKET PC MOUNTING VERTICAL MOUNT, V-BRACKET, SNAP-IN OPTION CODE SNAP-IN E201MD1__BE DPDT DIM ‘A’ V3, V31 .460 (11,68) V9 1.150 (29,21) Actuator Shown In Pos. 1 Not available with Y bushing. V9 VERTICAL MOUNT, V-BRACKET PC MOUNTING E301MD1__BE Toggle F OPTION CODE DIM ‘A’ V9 1.150 (29,21) SNAP-IN 3PDT Actuator Shown In Pos. 1 Not available with D9 & Y bushings. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change F–28 www.ck-components.com E Series Sealed Miniature Toggle Switches CONTACT MATERIAL OPTION CODE B CONTACT MATERIAL GOLD 1 P Q R RATINGS GOLD 1 LOW LEVEL/ MATTE-TIN 6 DRY CIRCUIT 0.4 VA MAX. @ 20 V AC OR DC MAX. SILVER 5 SILVER 4,5 MATTE-TIN 6 POWER GOLD OVER GOLD 3 LOW LEVEL/DRY S G TERMINAL PLATING SILVER 2,3 MATTE-TIN 6 E1XX & E2XX MODELS: 7.5 AMPS @ 125 V AC OR 28 V DC; 3 AMPS @ 250 V AC. E3XX MODELS: 5 AMPS @ 125 V AC OR 28 V DC; 2 AMPS @ 250 V AC. CIRCUIT OR POWER E1XX AND E2XX MODELS: 0.4 VA MAX @20 V AC OR DC MAX. OR 7.5 AMPS @125 V AC OR 28 V DC; 3 AMPS @ 250 V AC. DC E3XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR 5 AMPS @ 125 V AC OR 28 V DC; 2 AMPS @ 250 V AC. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. 2 END CONTACTS: Coin silver, with gold plate over nickel plate. 3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate over nickel plate. 4 END CONTACTS: Coin silver, silver plated. NOTE: Any models supplied with P, S, R, Q, B or G contact material are RoHS compliant. All models with all options when ordered with S, R, G, or Q contact material except with F1 conductive bushing. B contact material standard with all terminations. P, S & R contact materials not available with Z & Z3 terminations. 5 CENTER CONTACT & ALL TERMINALS: Copper alloy, with gold flash over silver plate. Or copper alloy, silver plated. 6 TERMINALS: Copper alloy, with matte-tin over nickel plate. F Toggle Dimensions are shown: Inches (mm) Specifications and dimensions subject to change F–29 www.ck-components.com