Vishay E102 High precision bulk metalâ® foil extended value range resistor, with tcr of 2 ppm/â°c, tolerance to 0.005 %, and power rated at 0.6 w Datasheet

E102
Vishay Foil Resistors
High Precision Bulk Metal® Foil Extended Value Range
Resistor, with TCR of 2 ppm/°C, Tolerance to 0.005 %,
and Power Rated at 0.6 W
FEATURES
Any value available within resistance range
Bulk Metal® foil (BMF) technology outperforms all other
resistor technologies available today for applications that
require high precision and high stability.
This technology has been pioneered and developed by
VISHAY, and products based on this technology are the
most suitable for a wide range of applications.
BMF technology allows us to produce customer orientated
products, designed to satisfy challenging and specific
technical requirements.
The E102C (0.150" lead spacing) and E102J (0.200" lead
spacing) extends the range of the high precision aerospace
and instrumentation standard S102C/J from 150K to 300K.
Our application engineering department is available to
advise and to make recommendations. For non-standard
technical requirements and special applications, please
contact us.
FIGURE 1 - TYPICAL TCR CURVE
• Temperature coefficient of resistance (TCR):
- 55 °C to + 125 °C, + 25 °C ref.
2 ppm/°C typical
• Rated power: to 0.3 W at + 125 °C
• Tolerance: ± 0.005 %
• Load life stability: to ± 0.005 % at 70 °C, 2000 h at rated
power
• Resistance range: 150 kΩ to 300 kΩ (higher and lower
values of resistance are available)
• Electrostatic discharge (ESD) above 25 000 V
• Non inductive, non capacitive design
• Rise time: 1 ns without ringing
• Current noise: < - 40 dB
• Thermal EMF: 0.05 µV/°C typical
• Voltage coefficient < 0.1 ppm/V
• Low inductance: < 0.08 µH typical
• Non hot spot design
• Terminal finishes available: lead (Pb)-free
tin/lead alloy
• Matched sets are available on request
(TCR tracking: to 0.5 ppm/°C)
• For better TCR and PCR performances please review the
E102Z datasheet
FIGURE 2 - POWER DERATING CURVE
+ 150
+ 100
ΔR
+ 50
R
(ppm)
0
- 50
- 100
- 150
± 2 ppm/°C (+ 25 °C Reference)
- 200
- 50
- 55
- 25
0
+ 20
+ 50
+ 75
+ 100
Ambient Temperature (°C)
+ 125
Percent of Rated Power at + 125 °C
200 %
- 55 °C
+ 70 °C
Double Rated Power
175 %
150 %
125 %
Rated Power
100 %
75 %
50 %
25 %
0
- 75 - 50 - 25
0
+ 25 + 50 + 75 + 100 + 125 + 150 + 175 + 200
Ambient Temperature (°C)
TABLE 1 - E102 SPECIFICATIONS
Stability
Load life at 2000 h
Load life at 10 000 h
Current Noise
High Frequency Operation
Rise time
Inductance (L)
Capacitance (C)
Voltage Coefficient
Thermal EMF
Document Number: 63066
Revision: 27-Feb-08
± 0.005 % maximum ΔR at 0.1 W/+ 70 °C
± 0.015 % maximum ΔR at 0.3 W/+ 125 °C
± 0.01 % maximum ΔR at 0.05 W/+ 125 °C
± 0.05 % maximum ΔR at 0.3 W/+ 125 °C
< - 40 dB
1.0 ns
0.1 µH maximum; 0.08 µH typical
1.0 pF maximum; 0.5 pF typical
< 0.1 ppm/V
0.1 µV/°C maximum; 0.05 µV/°C typical
For any questions, contact: [email protected]
www.vishay.com
1
E102
Vishay Foil Resistors High Precision Bulk Metal® Foil Extended Value Range
Resistor, with TCR of 2 ppm/°C, Tolerance to 0.005 %,
and Power Rated at 0.6 W
FIGURE 3 - TRIMMING TO VALUES
(Conceptual Illustration)
FIGURE 4 - STANDARD IMPRINTING AND
DIMENSIONS
Front View
0.235 (5.97)
0.365 (9.27)
Rear View
Optional Customer P/N
Print spec., etc. if required
Date Code
0.380
(9.65)
Current Path
Before Trimming
Interloop Capacitance
Reduction in Series
VISHAY
XXXX
E102J
XXXXXX
200K00
0.01 %
Resistance
Value Code
Tolerance
0.020 (0.51)
0.075 (1.91) Min.
Current Path
After Trimming
Trimming Process
Removes this Material
from Shorting Strip Area
Changing Current Path
and Increasing
Resistance
Mutual Inductance
Reduction due
to Opposing
Current in
Adjacent Lines
Model Number
0.200
(5.08)
ø 0.025 (0.64) #22 AWG
Lead Material - Solder Coated Copper
Tolerance: ± 0.010 (0.25)
E102C, E102K lead spacing = 0.150" (3.81)
E102J, E102L lead spacing = 0.200" (5.08)
The E102C, E102J use the S102C series chip.
The E102K, E102L use the S102K series chip.
(numbers in parentheses indicate millimeters).
Note: Foil shown in black, etched spaces in white
TABLE 2 - GLOBAL PART NUMBER INFORMATION
NEW GLOBAL PART NUMBER: Y1186150K000T9L (preferred part number format)
DENOTES PRECISION
VALUE
AER*
Y
K = kΩ
0 = standard part, tin/lead termination
9 = standard part, lead (Pb)-free termination
1 - 999 = custom
Y
1
1
8
6
1
5
0
K
0
0
0
T
9
PRODUCT CODE
RESISTANCE TOLERANCE
PACKAGING
1186 = E102C
1184 = E102J
1187 = E102K
1185 = E102L
V = ± 0.005 %
T = ± 0.01 %
Q = ± 0.02 %
A = ± 0.05 %
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
F = ± 1.0 %
L = bulk pack
L
FOR EXAMPLE: ABOVE GLOBAL ORDER Y1186 150K000 T 9 L:
TYPE: E102C
VALUE: 150.0 kΩ
ABSOLUTE TOLERANCE: ± 0.01 %
TERMINATION: lead (Pb)-free
PACKAGING: bulk pack
HISTORICAL PART NUMBER: E102C T 150K00 T B (will continue to be used)
E102C
T
150K00
T
B
MODEL
TERMINATION
OHMIC VALUE
RESISTANCE
TOLERANCE
PACKAGING
E102C
E102J
E102K
E102L
T = lead (Pb)-free
None = tin/lead alloy
150K00 = 150.0 kΩ
V = ± 0.005 %
T = ± 0.01 %
Q = ± 0.02 %
A = ± 0.05 %
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
F = ± 1.0 %
B = bulk pack
Note
* Application engineering release: for non-standard requests, please contact application engineering.
www.vishay.com
2
For any questions, contact: [email protected]
Document Number: 63066
Revision: 27-Feb-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages