E1736A USB Sensor Hub Data Sheet This Sensor Hub provides the interface for the Agilent E1737A Material Sensor and Agilent E1738A Air Temperature/Pressure/Humidity Sensor used with the Agilent 5530 Dynamic Calibrator system. These sensors monitor parameters in the environment of the device being calibrated to enable the laser system to calculate appropriate correction factors. The E1736A can accommodate multiple sensors of both types. The axis module interfaces with the system PC via a standard high-speed USB 2.0 interface. Specifications of the Sensor Hub (E1736A): Measurement Range: 0 - 40°C (32 – 104°F) air temperature 0 - 55°C (32 – 131°F) material temperature 70 – 110 kPa (10.2 – 16.0 psia) air pressure 10 – 90% relative humidity Measurement Resolution: 0.004°C (0.007°F) air/material temperature 5 Pa (0.001 psi) air pressure 1% relative humidity per 15 sec Refresh Rate: 102 x 63 x 24 mm (4.02 x 2.48 x 0.95 in) Dimensions: 200g (0.44 lb) Weight: Printed in the USA February 2, 2009 5989-9709EN Additional information is available at: www.agilent.com/find/5530A