Ecliptek EC1320HSTS-50000M Oscillator Datasheet

EC13 Series
EC13
• RoHS Compliant (Pb-free)
• HCMOS/TTL output
• 3.3V supply voltage
• 14 pin DIP package
• Stability to ±20ppm
• Custom lead length,
gull wing options available
H 5.08
W 20.8
L 13.2
OSCILLATOR
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz)
0.250MHz to 125.000MHz
Operating Temperature Range
0°C to 70°C
-40°C to 85°C
Storage Temperature Range
-55°C to 125°C
Supply Voltage (VDD)
Input Current
Frequency Tolerance / Stability
3.3VDC ±0.3VDC
0.250MHz to 24.000MHz
10mA Maximum
24.001MHz to 70.000MHz
25mA Maximum
70.001MHz to 125.000MHz
45mA Maximum
Inclusive of all conditions: Calibration Tolerance at 25°C,
±100ppm, ±50ppm, ±25ppm, or
Frequency Stability over the Operating Temperature Range,
±20ppm Maximum (0°C to 70°C Only)
Supply Voltage Change, Output Load Change, First Year Aging
at 25°C, Shock, and Vibration
Output Voltage Logic High (VOH) w/ TTL Load
2.4VDC Minimum
w/ HCMOS Load
2.7VDC Minimum
w/ TTL Load
0.4VDC Maximum
w/ HCMOS Load
0.5VDC Maximum
10% to 90% of Waveform w/HCMOS Load or
10 nSeconds Max. < 24.000MHz
0.4VDC to 2.4VDC w/TTL Load
10 nSeconds Max. < 24.000MHz
10% to 90% of Waveform w/HCMOS Load
6 nSeconds Max. 24.000MHz to 70.000MHz
10% to 90% of Waveform w/HCMOS Load
4 nSeconds Max. 70.001MHz to 125.000MHz
Duty Cycle
at 50% of Waveform
50 ±10(%) (Standard) or 50 ±5(%) (Optional)
Load Drive Capability
< 24.000MHz
2TTL or 15pF HCMOS Load
> 24.000MHz
15pF HCMOS Load
VIH :No Connection
Enables Output
VIH :>2.2VDC
Enables Output
VIL :<0.8VDC
Disables Output: High Impedance
Output Voltage Logic Low (VOL)
Rise Time / Fall Time
Tri-State Input Voltage
Aging (at 25°C)
±5ppm / year Maximum
Start Up Time
10 mSeconds Maximum
Period Jitter: Absolute
±100pSeconds Maximum
Period Jitter: One Sigma
±25pSeconds Maximum
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
ECLIPTEK CORP.
OSCILLATOR
EC13
14 pin DIP
3.3V
OS20
800-ECLIPTEK www.ecliptek.com for latest revision
REV.DATE
08/06
Specifications subject to change without notice.
PART NUMBERING GUIDE
EC13 00 ET T TS - 50.000M - G
FREQUENCY TOLERANCE / STABILITY
00=±100ppm Maximum (Standard)
45=±50ppm Maximum, 25=±25ppm Maximum
20=±20ppm Maximum
AVAILABLE OPTIONS
Blank=None (Standard)
CLXXX=Custom Lead Length
G=Full Size Gull Wing
OPERATING TEMP. RANGE
Blank=0°C to 70°C (Standard), ET=-40°C to 85°C
FREQUENCY
OUTPUT CONTROL FUNCTION
Blank = No Connect
TS=Tri-State Enable High
DUTY CYCLE
Blank=50 ±10(%) (Standard), T=50 ±5(%)
NOTES
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
MARKING SPECIFICATIONS
Pin 1: Tri-State or N o Connect
Pin 7: Case Ground
Pin 8: Output
Pin 14: Supply Voltage
Line 1: ECLIPTEK
Line 2: EC13 TS
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
Output Control Function
TS = Tri-State Enable High
Characteristic
Specification
Fine Leak Test
Gross Leak Test
Mechanical Shock
Vibration
Lead Integrity
Solderability
Temperature Cycling
Resistance to Soldering Heat
Resistance to Solvents
MIL-STD-883, Method 1014, Condition A
MIL-STD-883, Method 1014, Condition C
MIL-STD-202, Method 213, Condition C
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 2004
MIL-STD-883, Method 2002
MIL-STD-883, Method 1010
MIL-STD-883, Method 210
MIL-STD-883, Method 215
Series Designator
Line 3: XX.XXX M
Frequency in MHz
(5 Digits Maximum + Decimal)
Line 4: XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
Note: Pin 1 shall be designated with a dot
MANUFACTURER
ECLIPTEK CORP.
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
OSCILLATOR
EC13
14 pin DIP
3.3V
OS20
08/06
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
EC13 Series
EC13
• RoHS Compliant (Pb-free)
• HCMOS/TTL output
• 3.3V supply voltage
• 8 pin DIP package
• Stability to ±20ppm
• Custom lead length,
gull wing options available
H 5.6
L 13.2
W 13.2
OSCILLATOR
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz)
0.250MHz to 125.000MHz
Operating Temperature Range
0°C to 70°C
-40°C to 85°C
Storage Temperature Range
-55°C to 125°C
Supply Voltage (VDD)
3.3VDC ±0.3VDC
Input Current
Frequency Tolerance / Stability
0.250MHz to 24.000MHz
10mA Maximum
24.001MHz to 70.000MHz
25mA Maximum
70.001MHz to 125.000MHz
45mA Maximum
Inclusive of all conditions: Calibration Tolerance at 25°C,
±100ppm, ±50ppm, ±25ppm, or
Frequency Stability over the Operating Temperature Range,
±20ppm Maximum (0°C to 70°C Only)
Supply Voltage Change, Output Load Change, First Year
Aging at 25°C, Shock, and Vibration
Output Voltage Logic High (VOH) w/ TTL Load
2.4VDC Minimum
w/ HCMOS Load
2.7VDC Minimum
w/ TTL Load
0.4VDC Maximum
w/ HCMOS Load
0.5VDC Maximum
10% to 90% of Waveform w/HCMOS Load or
10 nSeconds Max. < 24.000MHz
0.4VDC to 2.4VDC w/TTL Load
10 nSeconds Max. < 24.000MHz
10% to 90% of Waveform w/HCMOS Load
6 nSeconds Max. 24.000MHz to 70.000MHz
10% to 90% of Waveform w/HCMOS Load
4 nSeconds Max. 70.001MHz to 125.000MHz
Duty Cycle
at 50% of Waveform
50 ±10(%) (Standard) or 50 ±5(%) (Optional)
Load Drive Capability
< 24.000MHz
2TTL or 15pF HCMOS Load
> 24.000MHz
15pF HCMOS Load
VIH :No Connection
Enables Output
VIH :>2.2VDC
Enables Output
VIL :<0.8VDC
Disables Output: High Impedance
Output Voltage Logic Low (VOL)
Rise Time / Fall Time
Tri-State Input Voltage
Aging (at 25°C)
±5ppm / year Maximum
Start Up Time
10 mSeconds Maximum
Period Jitter: Absolute
±100pSeconds Maximum
Period Jitter: One Sigma
±25pSeconds Maximum
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
ECLIPTEK CORP.
OSCILLATOR
EC13
8 pin DIP
3.3V
OS21
800-ECLIPTEK www.ecliptek.com for latest revision
REV.DATE
08/06
Specifications subject to change without notice.
PART NUMBERING GUIDE
EC13 00 HS ET T TS - 50.000M - G TR
PACKAGING OPTIONS
TR= Tape & Reel (only offered with
Half Size G and Half Size G2 Options)
FREQUENCY TOLERANCE / STABILITY
00=±100ppm Maximum (Standard)
45=±50ppm Maximum, 25=±25ppm Maximum
20=±20ppm Maximum
AVAILABLE OPTIONS
Blank=None (Standard)
CLXXX=Custom Lead Length
G=Half Size Gull Wing
G2=Half Size Gull Wing
PACKAGE
HS=Half Size 8 Pin DIP
OPERATING TEMP. RANGE
Blank=0°C to 70°C (Standard), ET=-40°C to 85°C
FREQUENCY
OUTPUT CONTROL FUNCTION
Blank=None (No Connection on Pin 1)
TS=Tri-State Enable High
DUTY CYCLE
Blank=50 ±10(%) (Standard), T=50 ±5(%)
MECHANICAL DIMENSIONS
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
ALL DIMENSIONS IN MILLIMETERS
Pin 1 Locator for Gull Wing
(1) For “G” Option
(2) For “G2” Option
Ø
Ø
Pin 1: No Connect or Tri-State
Pin 4: Case Ground
Pin 5: Output
Pin 8: Supply Voltage
MARKING SPECIFICATIONS
Line 1: ECLIPTEK
Line 2: EC13 TS
Output Control Function
Blank = None (No Connection on Pin 1)
TS = Tri-State Enable High
Series Designator
250 Pieces Per Reel
Compliant to EIA-481A
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
Line 3: XX.XXX M
Frequency in MHz
(5 Digits Maximum + Decimal)
Line 4: XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
Note: Pin 1 shall be designated with a dot
Characteristic
Specification
Fine Leak Test
Gross Leak Test
Mechanical Shock
Vibration
Lead Integrity
Solderability
Temperature Cycling
Resistance to Soldering Heat
Resistance to Solvents
MIL-STD-883, Method 1014, Condition A
MIL-STD-883, Method 1014, Condition C
MIL-STD-202, Method 213, Condition C
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 2004
MIL-STD-883, Method 2002
MIL-STD-883, Method 1010
MIL-STD-883, Method 210
MIL-STD-883, Method 215
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EC13
8 pin DIP
3.3V
OS21
08/06
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
Similar pages