Marketing Bulletin DATE: December 27th, 2006 TO: All Sales Personnel FROM: Mark Stoner RE: Product Termination To all concerned parties, This bulletin is to notify all customers of the discontinuation of the following Ecliptek series effective December 27th, 2006: Series EC16 Description 5V 14 pin DIP Oscillator Recommended Replacement EB51F3 or EB51F5 In compliance with our End of Life (EOL) policy, this will serve as advanced notice of product termination. New orders will not be accepted after March 31st, 2007, with delivery to conclude by June 30th 2007. If there are any questions pertaining to this bulletin, please fell free to contact me. Thank you again for your cooperation. Best Regards, Mark W. Stoner Vice President of Marketing Ecliptek Corporation 3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234 EC16 Series EC16 • RoHS Compliant (Pb-free) • HCMOS/TTL output • 5.0V supply voltage • 14 pin DIP package • Stability to ±5ppm • Custom lead length, gull wing options available H 8.0 L 20.8 W 13.2 OBSOLETE OSCILLATOR ELECTRICAL SPECIFICATIONS Frequency Range (MHz) 1.000MHz to 46.000MHz Operating Temperature Range Per Table 1 Storage Temperature Range -55°C to 125°C Supply Voltage (VDD) 5.0VDC ±10% Input Current Frequency Tolerance / Stability 1.000MHz to 20.000MHz 15mA Maximum 20.001MHz to 46.000MHz 40mA Maximum vs. Operating Temperature Range Per Table 1 vs. Input Voltage ( VDD ±5%) ±2.0ppm Maximum vs. Load (±2pF ±1TTL) ±1.0ppm Maximum ±5ppm Minimum Internal Trim (Top of Can) Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Rise Time / Fall Time w/TTL Load 2.4VDC Minimum IOH = -16mA w/HCMOS Load VDD-0.5VDC Minimum IOH = -16mA w/TTL Load 0.4 VDC Maximum IOL = +16mA w/HCMOS Load 0.5VDC Maximum IOL = +16mA at 50% of Waveform w/HCMOS Load or 6 nSeconds Maximum at 1.4VDC w/TTL Load at 1.4VDC w/HCMOS Load or w/TTL Load Duty Cycle 50 ±10(%) (Standard) 10% to 90% of Waveform w/HCMOS Load or 0.4VDC to 2.4VDC w/TTL Load 10TTL Load or 50pF HCMOS Load Load Drive Capability Tri-State Input Voltage 50 ±5(%) (Optional) VIH: No Connection Enables Output VIH: ≥2.2VDC Enables Output VIL: ≤0.8VDC Disables Output: High Impedance Aging (at 25°C) ±1ppm / year Maximum Start Up Time 10 mSeconds Maximum Period Jitter: Absolute ±100pSeconds Maximum Period Jitter: One Sigma ±25pSeconds Maximum MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EC16 14 pin DIP 5.0V OS34 08/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EC16 07 A R T TS - 24.000M - CL125 AVAILABLE OPTIONS Blank=None (Standard) CLXXX=Custom Lead Length (See Page 133) G=Full Size Gull Wing (See Page 132) FREQUENCY STABILITY 2 Digit Code Per Table 1 OPERATING TEMPERATURE RANGE 1 Letter Code Per Table 1 INTERNAL TRIM OPTIONS Blank=No Internal Trim R=±5ppm Minimum (Top of Can) DUTY CYCLE Blank=50 ±10(%) (Standard) T=50 ±5(%) FREQUENCY OBSOLETE OUTPUT CONTROL FUNCTION TS=Tri-State Enable High MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS MARKING SPECIFICATIONS Pin 1: Tri-State Pin 7: Case Ground Pin 8: Output Pin 14: Supply Voltage Line 1: ECLIPTEK Line 2: EC16 TS Output Control Function ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Characteristic Specification Mechanical Shock Vibration Lead Integrity Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2004 MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215 TS = Tri-State Enable High Series Designator Line 3: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 4: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Note: Pin 1 shall be designated with a dot MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EC16 14 pin DIP 5.0V OS34 08/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.