Plastic Film Capacitors Stacked Metallized Plastic Film Chip Capacitor Type : ECPU(A) Stacked dielectric and inner electrode with simple mold - less construction ■Features •Low ESR •Max. capacitance values 1.0 µF •Smallest package size in film capacitors 3225/1.0 µF •For reflow soldering •RoHS directive compliant ■Recommended Applications •Noise suppressor •Coupling ■Explanation of Part Numbers 1 2 3 4 5 6 E C P U 1 C Product code Dielectric & construction Rated voltage. 7 8 Capacitance 9 10 11 12 M A Cap.tol Suffix Suffix 12 Tape width 5 8 mm 1C 16 VDC ■Specifications Category temp. range (Including temperature-rise on unit surface) - 40 ˚C to + 85 ˚C Rated voltage 16 VDC Capacitance range 0.10 µF to 1.0 µF (E6) Capacitance tolerance ± 20 % (M) Dissipation factor (tan ) tan < =1.5 % (20 ˚C, 1 kHz) Withstand voltage Between terminais : Rated volt (VDC)x175 % 1 s to 5 s Insulation resistance (IR) >1000 MΩ (20 :, 10 VDC, 60 s) C< =0.33 µF : IR= >300 MΩ · µF (20 :, 10 VDC, 60 s) C>0.33 µF : IR= Soldering conditions Reflow soldering : 240 ˚C max. and 30 sec max. at more than 220 ˚C (Temp. at cap. surface) ❈ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”. ■Construction ■Dimensions in mm (not to scale) Saize code L W H e1e2 g J1 2.0 1.25 1.0 0.45 > 0.6 = H1 3.2 1.6 0.8 0.65 > 1.0 = H2 3.2 1.6 1.0 0.65 > 1.0 = H3 3.2 1.6 1.4 0.65 > 1.0 = G2 3.2 2.5 1.4 0.65 > 1.0 = Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. Mar. 2006 Plastic Film Capacitors ■Taping Specification for Automatic Mounting Refer to the page of taping specifications. ■Rating, Dimensions & Quantity/Reel Dimensions (mm) Part No. Cap. (µF). L ECPU1C104MA5 0.1 ECPU1C154MA5 ECPU1C224MA5 W H Size Code 2.0 1.25 1.0 J1 0.15 3.2 1.6 0.8 H1 0.22 3.2 1.6 0.8 H1 ECPU1C334MA5 0.33 3.2 1.6 1.0 H2 ECPU1C474MA5 0.47 3.2 1.6 1.4 H3 ECPU1C684MA5 0.68 3.2 1.6 1.4 H3 ECPU1C105MA5 1.0 3.2 2.5 1.4 G2 Quantity 3000 2000 ■Recommened for Land Dimensions (mm) Size Code J1 H1 H2 H3 G2 Land dimensions for reflow soldering A 0.8 1.8 1.8 1.8 1.8 Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. B 2.4 3.6 3.6 3.6 3.6 C 1.1 1.4 1.4 1.4 2.3 Mar. 2006