Aluminum Electrolytic Capacitors/ TG Surface Mount Type Series: TG Type: V ■ Features ● ● ● ● ● Endurance:125 °C 1000 h to 2000 h Miniaturization (40 % less than TA Series) Low ESR (Low temp) Vibration-proof product is available upon request. (φ8 mm and larger) RoHS directive compliant (Parts No φ8 to φ10 : EEE✽, φ12.5 to φ18 : EEV✽) ■ Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan δ Characteristics at Low Temperature W.V. (V) Z(–25 °C)/Z(+20 °C) Z(–40 °C)/Z(+20 °C) 10 3 6 –40 °C to +125 °C 10 V.DC to 100 V.DC 10 µF to 4700 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV After 2 minutes Please see the attached standard products list 16 25 35 50 63 80 100 2 2 2 2 2 2 2 4 4 3 3 3 3 3 (Impedance ratio at 120 Hz) After applying rated working voltage for 1000 hours (φ8҂6.2), 2000 hours (φ8҂10.2 <) at +125 °C±2 °C and then being stabilized at +20 °C, capacitors shall meet the following limits. Endurance Capacitance change tan δ DC leakage current ±30 % of initial measured value (code U : ±35 %) < 300 % of initial specified value (code U : ±350 %) < initial specified value Shelf Life After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment) Resistance to Soldering Heat After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change ±10 % of initial measured value tan δ < initial specified value DC leakage current < initial specified value ■ Frequency correction factor for ripple current Frequency (Hz) 120 0.65 Correction factor ■ Marking 1k 0.85 10 k 0.95 100 k to 1.00 ■ Dimensions in mm (not to scale) (Unit : mm) 0.3 max. Rated Voltage Mark A 10 V C 16 V E 25 V V 35 V K (P) H L Pressure Relief (φ10 and larger) Lead-Free products (> φ12.5) Lot number B±0.2 Mark for Lead-Free Products Black Dot (Square) Rated Voltage Mark Lot number Negative polarity marking (–) A±0.2 – Series identification + (I) Capacitance (µF) 100 A TG φD±0.5 Negative polarity marking (–) (I) Example : 10 V 100 µF, 10 V 1000 µF Marking coloc : BLACK Lead-Free products (< φ10) W ( ) Reference size Capacitance (µF) 1000 A TG Series identification Rated Voltage Mark H J K 2A 50 V 63 V 80 V 100 V Size code E F G H13 J16 K16 D 8.0 8.0 10.0 12.5 16.0 18.0 L 6.2±0.3 10.2±0.3 10.2±0.3 13.5±0.5 16.5±0.5 16.5±0.5 A, B 8.3 8.3 10.3 13.5 17.0 19.0 H 9.5 max. 10.0 max. 12.0 max. 15.0 max. 19.0 max. 21.0 max. I 3.4 3.4 3.5 4.7 5.5 6.7 W 0.65±0.1 0.90±0.2 0.90±0.2 0.90±0.3 1.20±0.3 1.20±0.3 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EEE-50 – P 2.2 3.1 4.6 4.4 6.7 6.7 K + 0.15 - 0.20 0.35 0.70±0.20 0.70±0.20 0.70±0.30 0.70±0.30 0.70±0.30 00 Nov. 2012 Aluminum Electrolytic Capacitors/ TG ■ Standard Products Endurance : 125 °C 1000 h (φ8҂10.2 < : 2000 h) Case size W.V. (V) Cap. (±20 %) (µF) 100 220 330 10 470 1000 1500 2200 3300 4700 100 220 330 16 470 680 1000 2200 3300 47 100 220 25 330 470 680 1000 2200 33 47 35 100 220 330 470 35 680 1000 Dia. Length (mm) 8 8 8 8 10 10 12.5 12.5 16 16 18 18 8 8 10 10 12.5 12.5 12.5 12.5 16 16 18 18 8 8 8 8 10 10 12.5 12.5 12.5 16 16 18 18 8 8 8 8 10 10 12.5 12.5 16 16 18 18 (mm) 6.2 6.2 10.2 10.2 10.2 10.2 13.5 13.5 16.5 16.5 16.5 16.5 10.2 10.2 10.2 10.2 13.5 13.5 13.5 13.5 16.5 16.5 16.5 16.5 6.2 6.2 10.2 10.2 10.2 10.2 13.5 13.5 13.5 16.5 16.5 16.5 16.5 6.2 6.2 10.2 10.2 10.2 10.2 13.5 13.5 16.5 16.5 16.5 16.5 Min. Packaging Q'ty Specification ✽Size Code E (E) F (F) G (G) H13 (H13) J16 (J16) K16 K16 F (F) G (G) H13 H13 H13 (H13) J16 (J16) K16 K16 E (E) F (F) G (G) H13 H13 (H13) J16 (J16) K16 K16 E (E) F (F) G (G) H13 (H13) J16 (J16) K16 K16 Ripple ESR tan δ Part No. Current (RoHS:compliant) (100 kHz) (100 kHz) (120 Hz) (+125 °C) (+20 °C) (+20 °C) (mA r.m.s.) (액) EEETG1A101P 100 1.00 0.30 EEETG1A221UP 100 1.00 0.30 EEETG1A221P 197 0.50 0.30 EEETG1A331UP 197 0.50 0.30 EEETG1A331P 270 0.30 0.30 EEETG1A471UP 270 0.30 0.30 EEVTG1A102Q 800 0.12 0.30 EEVTG1A152UQ 800 0.12 0.30 EEVTG1A222M 1100 0.08 0.32 EEVTG1A332UM 1100 0.08 0.34 EEVTG1A332M 1300 0.075 0.34 EEVTG1A472M 1300 0.075 0.36 EEETG1C101P 197 0.50 0.23 EEETG1C221UP 197 0.50 0.23 EEETG1C221P 270 0.30 0.23 EEETG1C331UP 270 0.30 0.23 EEVTG1C331Q 800 0.12 0.23 EEVTG1C471Q 800 0.12 0.23 EEVTG1C681Q 800 0.12 0.23 EEVTG1C102UQ 800 0.12 0.23 EEVTG1C102M 1100 0.08 0.23 EEVTG1C222UM 1100 0.08 0.25 EEVTG1C222M 1300 0.075 0.25 EEVTG1C332M 1300 0.075 0.27 EEETG1E470P 100 1.00 0.18 EEETG1E101UP 100 1.00 0.18 EEETG1E101P 197 0.50 0.18 EEETG1E221UP 197 0.50 0.18 EEETG1E221P 270 0.30 0.18 EEETG1E331UP 270 0.30 0.18 EEVTG1E331Q 800 0.12 0.18 EEVTG1E471Q 800 0.12 0.18 EEVTG1E681UQ 800 0.12 0.18 EEVTG1E681M 1100 0.08 0.18 EEVTG1E102UM 1100 0.08 0.18 EEVTG1E102M 1300 0.075 0.18 EEVTG1E222M 1300 0.075 0.20 EEETG1V330P 100 1.00 0.16 EEETG1V470UP 100 1.00 0.16 EEETG1V470P 197 0.50 0.16 EEETG1V101UP 197 0.50 0.16 EEETG1V101P 270 0.30 0.16 EEETG1V221UP 270 0.30 0.16 EEVTG1V331Q 800 0.12 0.16 EEVTG1V471UQ 800 0.12 0.16 EEVTG1V471M 1100 0.08 0.16 EEVTG1V681UM 1100 0.08 0.16 EEVTG1V681M 1300 0.075 0.16 EEVTG1V102M 0.075 0.16 1300 Reflow (2) (2) (2) (2) (2) (2) (3) (3) (3) (3) (3) (3) (2) (2) (2) (2) (3) (3) (3) (3) (3) (3) (3) (3) (2) (2) (2) (2) (2) (2) (3) (3) (3) (3) (3) (3) (3) (2) (2) (2) (2) (2) (2) (3) (3) (3) (3) (3) (3) Taping (pcs) 1000 1000 500 500 500 500 200 200 125 125 125 125 500 500 500 500 200 200 200 200 125 125 125 125 1000 1000 500 500 500 500 200 200 200 125 125 125 125 1000 1000 500 500 500 500 200 200 125 125 125 125 ✽Size code( ):Miniaturization product · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P, Q, or M” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EEE-51 – 00 Nov. 2012 Aluminum Electrolytic Capacitors/ TG ■ Standard Products Endurance : 125 °C 1000 h (φ8҂10.2 < : 2000 h) Case size W.V. (V) Cap. (±20 %) (µF) 10 22 33 47 50 100 220 330 470 680 1000 10 22 33 63 47 100 220 330 470 10 22 33 47 80 100 220 330 470 10 22 100 33 47 100 220 330 Dia. Length (mm) 8 8 8 8 8 10 10 12.5 12.5 16 16 18 18 8 8 8 10 8 10 10 12.5 12.5 16 16 8 8 10 8 10 10 12.5 12.5 16 16 18 16 18 18 8 8 10 10 12.5 16 18 18 (mm) 6.2 6.2 6.2 10.2 10.2 10.2 10.2 13.5 13.5 16.5 16.5 16.5 16.5 6.2 10.2 10.2 10.2 10.2 10.2 10.2 13.5 13.5 16.5 16.5 10.2 10.2 10.2 10.2 10.2 10.2 13.5 13.5 16.5 16.5 16.5 16.5 16.5 16.5 10.2 10.2 10.2 10.2 13.5 16.5 16.5 16.5 Min. Packaging Q'ty Specification ✽Size Code E E (E) F (F) G (G) H13 H13 J16 (J16) K16 K16 E F (F) G (F) G (G) H13 H13 J16 J16 F (F) G (F) G (G) H13 (H13) J16 (J16) K16 (J16) K16 K16 F (F) G G H13 J16 K16 K16 Ripple ESR tan δ Part No. Current (RoHS:compliant) (100 kHz) (100 kHz) (120 Hz) (+125 °C) (+20 °C) (+20 °C) (mA r.m.s.) (액) EEETG1H100P 80 1.60 0.14 EEETG1H220P 80 1.60 0.14 EEETG1H330UP 80 1.60 0.14 EEETG1H330P 133 0.75 0.14 EEETG1H470UP 133 0.75 0.14 EEETG1H470P 221 0.50 0.14 EEETG1H101UP 221 0.50 0.14 EEVTG1H221Q 600 0.23 0.14 EEVTG1H331Q 600 0.23 0.14 EEVTG1H471M 900 0.15 0.14 EEVTG1H681UM 900 0.15 0.14 EEVTG1H681M 950 0.14 0.14 EEVTG1H102M 950 0.14 0.14 EEETG1J100P 55 2.20 0.12 EEETG1J220P 100 1.00 0.12 EEETG1J330UP 100 1.00 0.12 EEETG1J330P 150 0.80 0.12 EEETG1J470UP 100 1.00 0.12 EEETG1J470P 150 0.80 0.12 EEETG1J101UP 150 0.80 0.12 EEVTG1J101Q 350 0.26 0.12 EEVTG1J221Q 350 0.26 0.12 EEVTG1J331M 500 0.18 0.12 EEVTG1J471M 500 0.18 0.12 EEETG1K100P 70 1.30 0.12 EEETG1K220UP 70 1.30 0.12 EEETG1K220P 90 1.00 0.12 EEETG1K330UP 70 1.30 0.12 EEETG1K330P 90 1.00 0.12 EEETG1K470UP 90 1.00 0.12 EEVTG1K470Q 250 0.42 0.12 EEVTG1K101UQ 250 0.42 0.12 EEVTG1K101M 350 0.30 0.12 EEVTG1K221UM 350 0.30 0.12 EEVTG1K221M 400 0.28 0.12 EEVTG1K331UM 350 0.30 0.12 EEVTG1K331M 400 0.28 0.12 EEVTG1K471M 400 0.28 0.12 EEETG2A100P 70 1.30 0.10 EEETG2A220UP 70 1.30 0.10 EEETG2A220P 90 1.00 0.10 EEETG2A330P 90 1.00 0.10 EEVTG2A470Q 250 0.42 0.10 EEVTG2A101M 350 0.30 0.10 EEVTG2A221M 400 0.28 0.10 EEVTG2A331M 400 0.28 0.10 Reflow (2) (2) (2) (2) (2) (2) (2) (3) (3) (3) (3) (3) (3) (2) (2) (2) (2) (2) (2) (2) (3) (3) (3) (3) (2) (2) (2) (2) (2) (2) (3) (3) (3) (3) (3) (3) (3) (3) (2) (2) (2) (2) (3) (3) (3) (3) Taping (pcs) 1000 1000 1000 500 500 500 500 200 200 125 125 125 125 1000 500 500 500 500 500 500 200 200 125 125 500 500 500 500 500 500 200 200 125 125 125 125 125 125 500 500 500 500 200 125 125 125 ✽Size code( ):Miniaturization product · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P, Q, or M” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EEE-52 – 00 Nov. 2012