Everlight EHP-C04/UT01-P01/TR High power led - 1w Datasheet

EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
High Power LED – 1W
EHP-C04/UT01-P01/TR
Features
Feature of the device: small package with high efficiency
Color coordinates: x=0.31, y=0.32 according to CIE 1931
Typical color temperature: 6500 K.
ESD protection.
Soldering methods: SMT
Grouping parameter: total luminous flux, color coordinates.
Typical luminous flux: 55 lm @ 500 mA.
Optical efficiency: 37 lm/W.
Thermal resistance (junction to sink): 37 °C/W (measured
at IF=350 mA DC mode).
The product itself will remain within RoHS compliant
version.
Applications
Mobile phone flash
Exterior and interior illumination applications
Decorative and entertainment
Exterior and interior automotive illumination
Materials
Items
Description
Substrate
Thermally conductive ceramics
Encapsulating Resin
Silicone resin with phosphor
Electrodes
Ag plating
Die attach
Silver paste
Chip
InGaN
Everlight Electronics Co., Ltd.
Device No. :
http://www.everlight.com
Prepared date: July. 24, 2007
Rev. 1.0
Page: 1 of 10
Prepared by: Randal Chiang
EVERLIGHT ELECTRONICS CO.,LTD.
EHP-C04/UT01-P01/TR
Dimensions
Notes: 1. Dimensions are in millimeters.
2. Tolerances unless dimensions ±0.1mm.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Page: 2 of 10
Device No. :
Prepared date: July. 24, 2007
Prepared by: Randal Chiang
EVERLIGHT ELECTRONICS CO.,LTD.
EHP-C04/UT01-P01/TR
Maximum Ratings (T Ambient=25ºC)
Parameter
Symbol
Rating
Unit
DC Operating Current
IF
350
mA
Pulsed Forward Current
IF
1000
mA
ESD
8000
V
Junction Temperature
Tj
125
Operating Temperature
Topr
-40 ~ +85
°C
°C
Storage Temperature
Tstg
-40 ~ +120
°C
Power Dissipation (Pulse Mode)
Pd
4.9
W
Dynamic Resistance
RD
△V /△T
0.5
Ω
-2.1
mV/°C
Rth
37
°C /W
ESD Sensitivity (JEDEC 3b)
Temp. Coefficient of Forward Voltage
F
Junction to Heat-Sink Thermal Resistance(1)
j
Note. 1. Thermal resistance, junction to sink, is measured at IF=350 mA DC mode when room temp. is 25°C.
Electro-Optical Characteristics (TAmbient=25ºC)
Parameter
Bin
Symbol
J4
J5
Luminous Flux(1)
K1
Фv
K2
Viewing Angle(2)
----
2θ1/2
S4
Forward Voltage(3)
Typ.
Max
39
----
45
45
----
52
52
----
60
60
----
70
----
130
----
2.95
----
3.35
3.35
----
3.75
5000
6500
10000
VF
T1
Color Temperature
Min
----
CCT
Unit
Condition
lm
deg
IF=500mA
V
K
Note. 1. Luminous flux measurement tolerance: ±10%
2. 2θ1/2 is the off axis angle from lamp centerline where the luminous intensity is 1/2 of the peak value.
3. Forward voltage measurement tolerance: ±0.1V
4. Electric and optical data is tested at 100 ms pulse condition.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Page: 3 of 10
Device No. :
Prepared date: July. 24, 2007
Prepared by: Randal Chiang
EVERLIGHT ELECTRONICS CO.,LTD.
EHP-C04/UT01-P01/TR
Color Binning
Rank A0
Rank B3
x
0.280
0.264
0.283
0.296
x
0.287
0.283
0.304
0.307
y
0.248
0.267
0.305
0.276
y
0.295
0.305
0.330
0.315
Reference CCT: 9000K-15000K
Reference CCT: 7000K-8700K
Rank B4
Rank B5
x
0.307
0.304
0.330
0.330
x
0.296
0.287
0.307
0.311
y
0.315
0.330
0.360
0.339
y
0.276
0.295
0.315
0.294
Reference CCT: 6200K-7000K
Reference CCT: 7000K-9000K
Rank B6
Rank C0
x
0.311
0.307
0.330
0.330
x
0.330
0.330
0.361
0.356
y
0.294
0.315
0.339
0.318
y
0.318
0.360
0.385
0.351
Reference CCT: 5600K-7000K
Reference CCT: 4600K-5600K
Note. 1. Color coordinates measurement allowance : ±0.01
2. Color bins are defined at IF=500 mA
Color Binning Structure Graphic Representation
0.44
0.40
0.36
y
C0
B4
0.32
B3 B6
B5
0.28
A0
0.24
0.20
0.20
0.24
0.28
0.32
0.36
0.40
0.44
x
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Page: 4 of 10
Device No. :
Prepared date: July. 24, 2007
Prepared by: Randal Chiang
EVERLIGHT ELECTRONICS CO.,LTD.
EHP-C04/UT01-P01/TR
Typical Electro-Optical Characteristics Curves
Forward Voltage vs Forward Current,
T Ambient=25ºC
Relative Spectral Distribution,
T Ambient=25ºC
IF=350mA,
500
4.0
3.8
75
Forward Voltage(V)
Relative Luminous Intensity (%)
100
50
3.6
3.4
3.2
25
3.0
0
400
2.8
450
500
550
600
650
700
750
800
0
200
Luminous Flux vs Forward Current,
TAmbient=25ºC
600
800
1000
Forward Current Derating Curve,
Derating based on TjMAX=125°C at torch mode
100
500
80
400
Forward Current (mA)
Luminous flux (lm)
400
Forward current(mA)
Wavelength (nm)
60
40
300
200
100
20
0
0
200
400
600
800
1000
0
0
20
40
60
80
o
Forward current (mA@100 ms)
Ambient temperature ( C)
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Page: 5 of 10
Device No. :
Prepared date: July. 24, 2007
Prepared by: Randal Chiang
100
EVERLIGHT ELECTRONICS CO.,LTD.
EHP-C04/UT01-P01/TR
Axial Illuminance (lux) vs. Drive Current
Corelated Color Temperature(CCT) vs.
Forward Current
25
7500
Illuminance at 1m distance (lux)
Corelated Color Temperature (K)
8000
7000
6500
6000
20
15
10
5
0
5500
0
200
400
600
800
1000
0
200
400
600
800
1000
Forward Current (mA@100ms)
Forward current (mA@100ms)
Notes: All correlation data is tested under superior thermal management with 1” x 1” MCPCB.
Typical Representative Spatial Radiation Pattern
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Page: 6 of 10
Device No. :
Prepared date: July. 24, 2007
Prepared by: Randal Chiang
EVERLIGHT ELECTRONICS CO.,LTD.
EHP-C04/UT01-P01/TR
Label Explanation
CPN: Customer’s Production Number
P/N : Production Number
QTY: Packing Quantity
CAT: Luminous Flux
HUE: Chromaticity Coordinates
REF: Forward Voltage
LOT No: Lot Number
MADE IN TAIWAN: Production Place
Reel Dimensions
Note: 1. Dimensions are in millimeters.
2. The tolerances unless mentioned is ±0.1mm.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Page: 7 of 10
Device No. :
Prepared date: July. 24, 2007
Prepared by: Randal Chiang
EVERLIGHT ELECTRONICS CO.,LTD.
EHP-C04/UT01-P01/TR
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Note: 1. Dimensions are in millimeters.
2. The tolerances unless mentioned is ±0.1mm.
Moisture Resistant Packaging
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Page: 8 of 10
Device No. :
Prepared date: July. 24, 2007
Prepared by: Randal Chiang
EVERLIGHT ELECTRONICS CO.,LTD.
EHP-C04/UT01-P01/TR
Reliability Test Items
Stress Test
Stress Condition
Stress Duration
Reflow
Tsol=260°C, 10sec, 6min
3 times
DC Operating Life
Ta=25°C , IF=350mA
1000 hours
H
Thermal
Shock
:+110°C
20min.
'∫ 10sec.
:-40°C
H:+100°C
'L
Temperature Cycle
500 Cycles
20min.
30min.
'∫ 5min.
'L
:-40°C
1000 Cycles
30min.
High Temperature/Humidity
Ta=85°C , RH=85%
1000 hours
High Temperature Storage
Ta=100°C
1000 hours
Low Temperature Storage
Ta=-40°C
1000 hours
Ta=25°C, IF=1000mA
Pulse Test
30000 times
400ms on/ 3600ms off
High Temperature Operation Life #1
Ta=55°C, IF=350mA
1000 hours
High Temperature Operation Life #2
Ta=85°C, IF=200mA
1000 hours
Ta=85°C, RH=60%, IF=200mA
1000 hours
8000V, Interval:0.5sec
3 times
High Temperature
/Humidity Operation Life
ESD Human Body Model
*lm: Brightness attenuate difference(1000hrs)
<20%
<30%
*VF: Forward voltage difference
Notes: All reliability items are tested under superior thermal management with 1” x 1” MCPCB.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Page: 9 of 10
Device No. :
Prepared date: July. 24, 2007
Prepared by: Randal Chiang
EVERLIGHT ELECTRONICS CO.,LTD.
EHP-C04/UT01-P01/TR
Precautions For Use
1. Over-current-proof
Though EHP-C04 has conducted ESD protection mechanism, customers must not use the device in reverse
and should apply resistors for extra protection. Otherwise, slight voltage shift may cause enormous current
shift and burn out failure would happen.
2. Storage
i.
Do not open moisture proof bag before the products are ready to use.
ii.
Before opening the package, the LEDs should be stored at temperature less than 30°C and less and
relative humidity less than 90%.
iii.
The LEDs should be used within a year.
iv.
After opening the package, the LEDs should be stored at temperature less than 30°C and relative
humidity less than 70%.
v.
The LEDs should be used within 168 hours (7 day) after the package was opened.
vi.
If the moisture absorbent material (silicone gel) has faded away or the LEDs have exceeded the storage
time, baking treatment should be implemented based on the following conditions: Pre-curing at 60±5°C
for 24 hours.
3. Thermal Management
i.
For maintaining the high flux output and achieving reliability, EHP-C04 series LEDs should be mounted
on a metal core printed circuit board (MCPCB), with proper thermal connection to dissipate
approximately 1W to 5W of thermal energy under normal operation.
ii.
Sufficient thermal management must be conducted, or the die junction temperature will be over the
limit under large electronic driving and LEDs lifetime will decrease critically.
4. Soldering Condition
4-1. Soldering pad
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Page: 10 of 10
Device No. :
Prepared date: July. 24, 2007
Prepared by: Randal Chiang
EVERLIGHT ELECTRONICS CO.,LTD.
EHP-C04/UT01-P01/TR
4-2. For Reflow Process
i.
Lead reflow soldering temperature profile
ii.
Reflow soldering should not be done more than two times.
iii.
While soldering, do not put stress on the LEDs during heating.
iv.
After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Page: 11 of 10
Device No. :
Prepared date: July. 24, 2007
Prepared by: Randal Chiang
Similar pages