EL5104, EL5105, EL5204, EL5205, EL5304 ® Data Sheet October 26, 2005 700MHz Slew-Enhanced VFAs Features The EL5104, EL5105, EL5204, EL5205, and EL5304 represent high speed voltage feedback amplifiers based on the current feedback amplifier architecture. This gives the typical high slew rate benefits of a CFA family along with the stability and ease of use associated with the VFA type architecture. This family is available in single, dual, and triple versions, with 200MHz, 400MHz, and 700MHz versions. This family operates on single 5V or ±5V supplies from minimum supply current. The EL5104 and EL5204 also feature an output enable function, which can be used to put the output in to a high-impedance mode. This enables the outputs of multiple amplifiers to be tied together for use in multiplexing applications. • Specified for 5V or ±5V applications FN7332.5 • Power-down to 17µA • -3dB bandwidth = 700MHz • ±0.1dB bandwidth = 45MHz • Low supply current = 9.5mA • Slew rate = 7000V/µs • Low offset voltage = 10mV max • Output current = 160mA • AVOL = 1400 • Diff gain/phase = 0.01%/0.02° • Pb-free plus anneal available (RoHS compliant) Applications • Video amplifiers • PCMCIA applications • A/D drivers • Line drivers • Portable computers • High speed communications • RGB applications • Broadcast equipment • Active filtering 1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright © Intersil Americas Inc. 2004-2005. All Rights Reserved. All other trademarks mentioned are the property of their respective owners. EL5104, EL5105, EL5204, EL5205, EL5304 Pinouts OUT 1 VS- 2 + - IN+ 3 6 VS+ NC 1 5 ENABLE IN- 2 4 IN- IN+ 3 8 ENABLE + VS- 4 IN- 2 IN+ 3 VS- 4 CE 5 + 7 VS+ VS- 2 6 OUT IN+ 3 9 OUT INA- 2 8 IN- INA+ 3 + 4 IN- EL5304 (16 LD QSOP) TOP VIEW 8 VS+ INA+ 1 7 OUTB + CEA 2 6 INB+ VS- 4 7 IN+ 5 VS+ 5 NC OUTA 1 10 VS+ + OUT 1 EL5205 (8 LD SO, MSOP) TOP VIEW EL5204 (10 LD MSOP) TOP VIEW OUT 1 EL5105 (5 LD SOT-23, SC-70) TOP VIEW EL5104 (8 LD SO) TOP VIEW EL5104 (6 LD SOT-23) TOP VIEW 16 INA+ 14 VS+ VS- 3 5 INB+ CEB 4 + - INB+ 5 6 CE INC+ 8 13 OUTB 12 INB- NC 6 CEC 7 15 OUTA 11 NC + - 10 OUTC 9 INC- Ordering Information PART NUMBER PART MARKING TAPE & REEL PACKAGE PKG. DWG. # EL5104IS 5104IS - 8 Ld SO MDP0027 EL5104IS-T7 5104IS 7” 8 Ld SO MDP0027 EL5104IS-T13 5104IS 13” 8 Ld SO MDP0027 EL5104ISZ (Note) 5104ISZ - 8 Ld SO (Pb-Free) MDP0027 EL5104ISZ-T7 (Note) 5104ISZ 7” 8 Ld SO (Pb-Free) MDP0027 EL5104ISZ-T13 (Note) 5104ISZ 13” 8 Ld SO (Pb-Free) MDP0027 EL5104IW-T7 n 7” (3K pcs) 6 Ld SOT-23 MDP0038 EL5104IW-T7A n 7” (250 pcs) 6 Ld SOT-23 MDP0038 EL5104IWZ-T7 (Note) BAEA 7” (3K pcs) 6 Ld SOT-23 (Pb-Free) MDP0038 EL5104IWZ-T7A (Note) BAEA 7” (250 pcs) 6 Ld SOT-23 (Pb-Free) MDP0038 EL5105IC-T7 C 7” (3K pcs) 5 Ld SC-70 P5.049 EL5105IC-T7A C 7” (250 pcs) 5 Ld SC-70 P5.049 EL5105IW-T7 f 7” (3K pcs) 5 Ld SOT-23 MDP0038 EL5105IW-T7A f 7” (250 pcs) 5 Ld SOT-23 MDP0038 EL5105IWZ-T7 (Note) BBMA 7” (3K pcs) 5 Ld SOT-23 (Pb-Free) MDP0038 EL5105IWZ-T7A (Note) BBMA 7” (250 pcs) 5 Ld SOT-23 (Pb-Free) MDP0038 2 FN7332.5 October 26, 2005 EL5104, EL5105, EL5204, EL5205, EL5304 Ordering Information (Continued) PART NUMBER PART MARKING TAPE & REEL PACKAGE PKG. DWG. # EL5204IY BTAAA - 10 Ld MSOP MDP0043 EL5204IY-T7 BTAAA 7” 10 Ld MSOP MDP0043 EL5204IY-T13 BTAAA 13” 10 Ld MSOP MDP0043 EL5204IYZ (Note) BAAAF - 10 Ld MSOP (Pb-Free) MDP0043 EL5204IYZ-T7 (Note) BAAAF 7” 10 Ld MSOP (Pb-Free) MDP0043 EL5204IYZ-T13 (Note) BAAAF 13” 10 Ld MSOP (Pb-Free) MDP0043 EL5205IS 5205IS - 8 Ld SO MDP0027 EL5205IS-T7 5205IS 7” 8 Ld SO MDP0027 EL5205IS-T13 5205IS 13” 8 Ld SO MDP0027 EL5205ISZ (Note) 5205ISZ - 8 Ld SO (Pb-Free) MDP0027 EL5205ISZ-T7 (Note) 5205ISZ 7” 8 Ld SO (Pb-Free) MDP0027 EL5205ISZ-T13 (Note) 5205ISZ 13” 8 Ld SO (Pb-Free) MDP0027 EL5205IY BVAAA - 8 Ld MSOP MDP0043 EL5205IY-T7 BVAAA 7” 8 Ld MSOP MDP0043 EL5205IY-T13 BVAAA 13” 8 Ld MSOP MDP0043 EL5205IYZ (Note) BAAAG - 8 Ld MSOP (Pb-free) MDP0043 EL5205IYZ-T7 (Note) BAAAG 7” 8 Ld MSOP (Pb-free) MDP0043 EL5205IYZ-T13 (Note) BAAAG 13” 8 Ld MSOP (Pb-free) MDP0043 EL5304IU 5304IU - 16 Ld QSOP MDP0040 EL5304IU-T7 5304IU 7” 16 Ld QSOP MDP0040 EL5304IU-T13 5304IU 13” 16 Ld QSOP MDP0040 EL5304IUZ (Note) 5304IUZ - 16 Ld QSOP (Pb-Free) MDP0040 EL5304IUZ-T7 (Note) 5304IUZ 7” 16 Ld QSOP (Pb-Free) MDP0040 EL5304IUZ-T13 (Note) 5304IUZ 13” 16 Ld QSOP (Pb-Free) MDP0040 NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. 3 FN7332.5 October 26, 2005 EL5104, EL5105, EL5204, EL5205, EL5304 Absolute Maximum Ratings (TA = 25°C) Supply Voltage between VS+ and GND. . . . . . . . . . . . . . . . . . 13.2V Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .±VS Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .±4V Maximum Output Current. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80mA VS+ to VS- Maximum Slew Rate . . . . . . . . . . . . . . . . . . . . . . . 1V/µs Storage Temperature Range . . . . . . . . . . . . . . . . . .-65°C to +150°C Ambient Operating Temperature Range . . . . . . . . . .-40°C to +85°C Operating Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . 150°C CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests are at the specified temperature and are pulsed tests, therefore: TJ = TC = TA DC Electrical Specifications VS = ±5V, GND = 0V, TA = 25°C, VCM = 0V, VOUT = 0V, VENABLE = GND or OPEN, unless otherwise specified. PARAMETER VOS DESCRIPTION Offset Voltage CONDITIONS MIN TYP MAX UNIT EL5104, EL5105, EL5204, EL5205 -10 3 10 mV EL5304 -18 5 18 mV TCVOS Offset Voltage Temperature Coefficient Measured from TMIN to TMAX 10 IB Input Bias Current VIN = 0V 8 30 µA IOS Input Offset Current VIN = 0V 4 15 µA TCIOS Input Bias Current Temperature Coefficient Measured from TMIN to TMAX 50 nA/°C PSRR Power Supply Rejection Ratio 60 70 dB CMRR Common Mode Rejection Ratio VCM from -3V to +3V 56 62 dB CMIR Common Mode Input Range Guaranteed by CMRR test -3 RIN Input Resistance Common mode 50 CIN Input Capacitance SO package IS,ON Supply Current - Enabled Per amplifier 8.5 9.5 11 mA IS,OFF Supply Current - Shut Down VS+, per amplifier +1 0 +25 µA VS-, per amplifier -25 17 -1 µA 13.2 V PSOR Power Supply Operating Range AVOL Open Loop Gain +3 55 RL = 150Ω to GND kΩ 1 pF 65 dB 60 dB 3.8 V VOP Positive Output Voltage Swing RL = 150Ω to 0V VON Negative Output Voltage Swing RL = 150Ω to 0V IOUT Output Current RL = 10Ω to 0V VIH-EN ENABLE Pin Voltage for Power Up (VS+) -5 (VS+) -3 V VIL-EN ENABLE Pin Voltage for Shut Down (VS+) -1 VS+ V 4 3.6 V 120 4 RL = 1kΩ to GND µV/°C -3.8 ±90 -3.6 ±160 V mA FN7332.5 October 26, 2005 EL5104, EL5105, EL5204, EL5205, EL5304 Closed Loop AC Electrical Specifications VS = +5V, GND = 0V, TA = 25°C, VCM = +1.5V, VOUT = +1.5V, VCLAMP = +5V, VENABLE = 0V, AV = +1, RF = 0Ω, RL = 150Ω to GND pin, unless otherwise specified. PARAMETER DESCRIPTION CONDITIONS MIN TYP MAX UNIT BW -3dB Bandwidth (VOUT = 200mVP-P) VS = ±5V, AV = 1, RF = 0Ω SR Slew Rate RL = 100Ω, VOUT = -3V to +3V tR, tF Rise Time, Fall Time ±0.1V step 0.4 ns OS Overshoot ±0.1V step 10 % tPD Propagation Delay ±0.1V step 0.4 ns tS 0.1% Settling Time VS = ±5V, RL = 500Ω, AV = 1, VOUT = ±2.5V 7 ns dG Differential Gain AV = 2, RL = 150Ω, VINDC = -1 to +1V 0.01 % dP Differential Phase AV = 2, RL = 150Ω, VINDC = -1 to +1V 0.02 ° eN Input Noise Voltage f = 10kHz 10 nV/√Hz iN Input Noise Current f = 10kHz 54 pA/√Hz tDIS Disable Time 180 ns tEN Enable Time 650 ns IEN Enable Pin Current 5 700 2000 3000 MHz 7000 V/µs Enabled, VEN = 0V -1 1 µA Disabled, VEN = 5V 1 25 µA FN7332.5 October 26, 2005 EL5104, EL5105, EL5204, EL5205, EL5304 Typical Performance Curves 5 3 2 120 1 0 -1 -2 VS=±5V AV=+1 RF=0 RL=500Ω 180 PHASE (°) NORMALIZED GAIN (dB) 240 VS=±5V AV=+1 RF=0 RL=500Ω 4 60 0 -60 -3dB BW @ 925MHz -120 -3 -180 -4 -5 100k 1M 10M 100M 1G -240 100k 10G 1M 10M 100M FREQUENCY (Hz) FREQUENCY (Hz) FIGURE 1. GAIN vs FREQUENCY (-3dB BANDWIDTH) FIGURE 2. PHASE vs FREQUENCY 70 0.5 VS=±5V AV=+1 RF=0 RL=500Ω 0.3 0.2 GAIN=40dB or 100 FREQ.=2.64MHz GAIN BW PRODUCT=2.64x100=264MHz 60 0.1dB BW @ 39MHz 0.1 0 -0.1 GAIN (dB) NORMALIZED GAIN (dB) 0.4 50 40 -0.2 30 -0.3 VS=±5V RL=500Ω -0.4 -0.5 1 10 20 100 0 1 FREQUENCY (MHz) 100 FIGURE 4. GAIN BANDWIDTH PRODUCT 300 5 4 NORMALIZED GAIN (dB) 250 200 150 100 VS=±5V RL=500Ω 50 2.0 10 FREQUENCY (MHz) FIGURE 3. 0.1dB BANDWIDTH GAIN-BANDWIDTH PRODUCT (MHz) 1G 2.5 3 VS=±5V RL=500Ω AV=+1 RF=0 2 1 0 -1 -2 AV=+5 RF=1.6k, RG=402 -3 AV=+2 RF=RG=255Ω -4 3.0 3.5 4.0 4.5 5.0 5.5 SUPPLY VOLTAGES (±V) FIGURE 5. GAIN BANDWIDTH PRODUCT vs SUPPLY VOLTAGES 6 6.0 -5 100k 1M 10M 100M FREQUENCY (Hz) 1G FIGURE 6. GAIN vs FREQUENCY FOR VARIOUS +AV FN7332.5 October 26, 2005 EL5104, EL5105, EL5204, EL5205, EL5304 Typical Performance Curves (Continued) 5 5 AV=+1 RF=0 RL=500Ω 3 VS=±6V 2 VS=±5V 1 0 -1 VS=±4V -2 VS=±3V -3 -4 1M 10M 100M FREQUENCY (Hz) 1G -1 -2 RL=150Ω -3 RL=75Ω RL=50Ω 1M 4 2 RL=500Ω 1 RL=1kΩ 0 -1 -2 RL=50Ω -3 RL=75Ω -4 1M 10M 3 2 100M RL=500Ω -1 -2 RL=50Ω -3 RL=75Ω RL=150Ω 1M 1G FIGURE 10. GAIN vs FREQUENCY FOR VARIOUS RL (AV=+5) CL=22pF CL=12pF 4 CL=5.6pF CL=3.3pF 0 -1 CL=0pF -2 -3 -4 NORMALIZED GAIN (dB) NORMALIZED GAIN (dB) 10M 100M FREQUENCY (Hz) 5 VS=±5 AV=+1 RF=0 RL=500Ω 1 -5 100k 10G RL=1kΩ 0 -5 100k 1G 5 2 1G 1 -4 RL=150Ω FIGURE 9. GAIN vs FREQUENCY FOR VARIOUS RL (AV=+2) 3 100M VS=±5 AV=+5 RF=1600Ω CL=12pF FREQUENCY (Hz) 4 10M FIGURE 8. GAIN vs FREQUENCY FOR VARIOUS RL (AV=+1) NORMALIZED GAIN (dB) NORMALIZED GAIN (dB) RL=500Ω 0 5 VS=±5 AV=+2 RF=255Ω -5 100k 1 FREQUENCY (Hz) 5 3 RL=1kΩ 2 -5 100k 10G FIGURE 7. GAIN vs FREQUENCY FOR VARIOUS ±Vs 4 3 -4 VS=±2V -5 100k VS=±5 AV=+1 RF=0 4 NORMALIZED GAIN (dB) NORMALIZED GAIN (dB) 4 3 2 VS=±5 AV=+2 RF=255Ω RL=500Ω CL=22pF CL=33pF CL=15pF 1 CL=8.2pF 0 -1 CL=0pF -2 -3 -4 1M 10M 100M FREQUENCY (Hz) 1G 10G FIGURE 11. GAIN vs FREQUENCY FOR VARIOUS CL (AV=+1) 7 -5 100k 1M 10M 100M FREQUENCY (Hz) 1G FIGURE 12. GAIN vs FREQUENCY FOR VARIOUS CL (AV=+2) FN7332.5 October 26, 2005 EL5104, EL5105, EL5204, EL5205, EL5304 Typical Performance Curves (Continued) 5 5 NORMALIZED GAIN (dB) 4 3 2 4 CL=100pF CL=68pF NORMALIZED GAIN (dB) VS=±5 AV=+5 RF=1600Ω RL=500Ω CL=39pF 1 0 CL=22pF -1 CL=0pF -2 -3 -4 1M 10M 100M FREQUENCY (Hz) RF=25Ω 1 0 -1 RF=0 -2 -3 RF=604Ω RF=511Ω 2 RF=402Ω 1 0 -1 RF=255Ω -2 -3 10M 4 RF=50Ω -4 3 VS=±5 AV=+5 RL=500Ω 1M 10M 100M RF=6kΩ 2 1 RF=2kΩ 0 -1 RF=1kΩ -2 -3 RF=100Ω -5 100k 1G FIGURE 15. GAIN vs FREQUENCY FOR VARIOUS RF (AV = +2) 1M 1 CIN=3.9pF CIN=2.7pF CIN=2.2pF 0 CIN=1pF -1 CIN=0pF -2 -3 -4 -5 100k 4 NORMALIZED GAIN (dB) NORMALIZED GAIN (dB) 5 VS=±5 AV=+2 RF=RG=255Ω RL=500Ω 10M 100M FREQUENCY (Hz) 1G FIGURE 16. GAIN vs FREQUENCY FOR VARIOUS RF (AV = +5) 5 2 10G RF=4kΩ FREQUENCY (Hz) 3 1G -4 -5 100k 4 100M FIGURE 14. GAIN vs FREQUENCY FOR VARIOUS RF (AV=+1) 5 VS=±5 AV=+2 RL=500Ω 1M FREQUENCY (Hz) NORMALIZED GAIN (dB) NORMALIZED GAIN (dB) 3 2 -5 100k 1G FIGURE 13. GAIN vs FREQUENCY FOR VARIOUS CL (AV=+5) 4 RF=50Ω -4 -5 100k 5 3 RF=100Ω VS=±5 AV=+1 RL=500Ω 3 2 1 VS=±5 AV=+5 RG=402Ω RL=1600Ω CL=15pF CIN=4.7pF CIN=3.3pF CIN=2.2pF 0 CIN=1.5pF -1 -2 CIN=0pF -3 -4 1M 10M 100M FREQUENCY (Hz) 1G FIGURE 17. GAIN vs FREQUENCY FOR VARIOUS CIN(-) (AV = +2) 8 -5 100k 1M 10M 100M 1G FREQUENCY (Hz) FIGURE 18. GAIN vs FREQUENCY FOR VARIOUS CIN(-) (AV = +5) FN7332.5 October 26, 2005 EL5104, EL5105, EL5204, EL5205, EL5304 Typical Performance Curves (Continued) 100 50 AV=+2 VS=±5V 10 30 ZOUT (Ω) OPEN LOOP GAIN (dB) 70 10 1 0.1 -10 -30 1k 10k 100k 1M 10M 100M 0.01 10k 1G 100k 100M FIGURE 20. ZOUT vs FREQUENCY 10 AV=+5 VS=±5V -30 -10 -50 -30 PSRR (dB) CMRR (dB) 10M FREQUENCY (Hz) FREQUENCY (Hz) FIGURE 19. OPEN LOOP GAIN AND PHASE vs FREQUENCY -10 1M -70 AV=+1 VS=±5V -50 VS+ -90 -70 -110 1k 10k 100k 1M 10M 100M -90 1k 1G VS- 10k 100k FREQUENCY (Hz) 1G 30 25 RL=500Ω 9 20 8 GROUP DELAY (ns) MAX OUTPUT VOLTAGE SWING (VP-P) 100M FIGURE 22. PSRR vs FREQUENCY 10 7 6 RL=150Ω 5 4 3 1 10M FREQUENCY (Hz) FIGURE 21. CMRR vs FREQUENCY 2 1M VS=±5V AV=+2 RF=RG=402Ω 0 100k 1M 15 10 VS=±5V AV=+1 RF=0 RL=500Ω 5 0 -5 -10 -15 -20 -25 10M 100M FREQUENCY (Hz) 1G FIGURE 23. MAX OUTPUT VOLTAGE SWING vs FREQUENCY 9 -30 100k 1M 10M 100M FREQUENCY (Hz) 1G FIGURE 24. GROUP DELAY vs FREQUENCY FN7332.5 October 26, 2005 EL5104, EL5105, EL5204, EL5205, EL5304 Typical Performance Curves -10 -20 0 -10 VS=±5V -20 AV=+1 -30 RF=0 -40 RL=500Ω -50 -60 -70 -80 -90 -100 -110 -120 -130 -140 100k 1M OUTPUT TO INPUT -40 GAIN (dB) ISOLATION (dB) -30 VS=±5V AV=+1 RF=0 CHIP DISABLED (Continued) -50 INPUT TO OUTPUT -60 -70 -80 -90 -100 100k 1M 10M 100M FREQUENCY (Hz) 1G FIGURE 25. INPUT AND OUTPUT ISOLATION -50 -60 -20 VS =±5V AV=+1 RF=0 RL=500Ω VOUT=2VP-P VS =±5V AV=+5 RG=402Ω RF=1600Ω RL=500Ω CL=15pF -30 -40 T.H.D -70 2ndH.D. -80 -90 -50 NOTE: This was done on the EL5205 (dual op amp). 10M 100M FREQUENCY (Hz) 1G FIN = 10MHz -60 -70 3rd H.D. FIN = 1MHz -80 -100 -90 -100 -110 100k 1M 10M 100M 0 1 2 5 ENABLE SIGNAL 4 3 Vs =±5V AV=+1 RF=0 RL=500Ω VOUT=2VP-P 2 OUTPUT SIGNAL 1 0 Vs =±5V 5 AV=+1 RF=0 4 R =500Ω L 3 VOUT=2VP-P FIGURE 29. TURN-ON TIME 10 8 0 -2 TIME (ns) 7 OUTPUT SIGNAL 1 -2 200 400 600 800 1000 1200 1400 1600 6 DISABLE SIGNAL 2 -1 0 5 6 -1 -3 -600 -400 -200 4 FIGURE 28. TOTAL HARMONIC DISTORTION vs OUTPUT VOLTAGES AMPLITUDE (V) 6 3 OUTPUT VOLTAGES (VP-P) FUNDAMENTAL FREQUENCY (Hz) FIGURE 27. HARMONIC DISTORTION vs FREQUENCY AMPLITUDE (V) B IN TO A OUT FIGURE 26. CHANNEL TO CHANNEL ISOLATION THD (dBc) HARMONIC DISTORTION (dBc) -40 A IN TO B OUT -3 -600 -400 -200 0 200 400 600 800 1000 1200 1400 1600 TIME (ns) FIGURE 30. TURN-OFF TIME FN7332.5 October 26, 2005 EL5104, EL5105, EL5204, EL5205, EL5304 Typical Performance Curves 1K (Continued) 0.5 VS=±5V Vs =±5V AV=+1 RF=0 R L=500Ω 0.3 VOUT=400mV 100 AMPLITUDE (V) NOISE VOLTAGE (nV/√Hz) 0.4 10 0.2 0.1 TFALL = 860ps 0.0 TRISE=852ps -0.1 -0.2 1 10 100 1k 10k -0.3 -20 100k 0 20 40 60 FIGURE 31. EQUIVALENT NOISE VOLTAGE vs FREQUENCY 4 AMPLITUDE (V) 3 12 Vs =±5V AV=+1 RF=0 RL=500Ω VOUT=4.0VP-P 10 2 1 TFALL = 944ps 0 TRISE=958ps -1 -2 -3 -20 0 20 40 60 80 8 6 4 NOTE: The curve showed positive current. The negative current was the same. 2 0 1.0 100 120 140 160 180 AV=+1 RF=0 RL=500Ω 1.5 2.0 2.5 TIME (ns) 3.5 4.0 4.5 5.0 5.5 6.0 FIGURE 34. SUPPLY CURRENT vs SUPPLY VOLTAGE 10 5000 NEGATIVE SLEW RATE AMPLITUDE (dBm) SLEW RATE (V/µs) 3.0 SUPPLY VOLTAGE (V) FIGURE 33. LARGE SIGNAL STEP RESPONSE_RISE & FALL TIME AV=+2 4500 RF=RG=255Ω RL=500Ω 4000 VOUT=4VP-P 100 120 140 160 180 FIGURE 32. SMALL SIGNAL STEP RESPONSE_RISE & FALL TIME SUPPLY CURRENT (mA) 5 80 TIME (ns) FREQUENCY (Hz) 3500 POSITIVE SLEW RATE 3000 2500 2000 Vs =±5V 0 AV=+5 -10 RF=1600Ω RL=100Ω -20 C =15pF L -30 f1=4dBm -40 @ 0.95MHz -50 2f1-f2=-72.7dBm -60 @ 0.85MHz -70 Delta IM=(4)-(-73)=77dB IP3=4+(77/2)=42.5dBm f2=4.1dBm @ 1.05MHz 2f2-f1=-73dBm @ 1.15MHz -80 1500 1000 2.0 -90 2.5 3.0 3.5 4.0 4.5 5.0 SUPPLY VOLTAGES (±V) 5.5 FIGURE 35. SLEW RATE vs SUPPLY VOLTAGES 11 6.0 -100 0.8 0.9 1.0 FREQUENCY (MHz) 1.1 1.2 FIGURE 36. THIRD ORDER IMD INTERCEPT (IP3) FN7332.5 October 26, 2005 EL5104, EL5105, EL5204, EL5205, EL5304 Typical Performance Curves (Continued) 60 55 50 IP3 (dBm) 45 40 35 30 Vs =±5V AV=+5 RF=1600Ω RL=100Ω CL=15pF 25 20 15 10 1 10 FREQUENCY (MHz) 100 FIGURE 37. THIRD ORDER IMD INTERCEPT vs FREQUENCY 1.2 1.136W 1.116W 1 POWER DISSIPATION (W) POWER DISSIPATION (W) 1.4 JEDEC JESD51-7 HIGH EFFECTIVE THERMAL CONDUCTIVITY TEST BOARD SO8 θJA=110°C/W 1 1.087W QSOP16 θJA=112°C/W 0.8 0.6 543mW MSOP8/10 θJA=115°C/W 0.4 SOT23-5/6 θJA=230°C/W 0.2 0 0 25 50 75 85 100 125 150 AMBIENT TEMPERATURE (°C) FIGURE 38. PACKAGE POWER DISSIPATION vs AMBIENT TEMPERATURE 12 JEDEC JESD51-3 LOW EFFECTIVE THERMAL CONDUCTIVITY TEST BOARD 791mW 0.8 QSOP16 θJA=158°C/W 781mW 0.6 MSOP8/10 θJA=206°C/W 488mW 0.4 SOT23-5/6 θJA=256°C/W 0.2 0 SO8 θJA=160°C/W 607mW 0 25 50 75 85 100 125 150 AMBIENT TEMPERATURE (°C) FIGURE 39. PACKAGE POWER DISSIPATION vs AMBIENT TEMPERATURE FN7332.5 October 26, 2005 EL5104, EL5105, EL5204, EL5205, EL5304 MSOP Package Outline Drawing 13 FN7332.5 October 26, 2005 EL5104, EL5105, EL5204, EL5205, EL5304 SO Package Outline Drawing 14 FN7332.5 October 26, 2005 EL5104, EL5105, EL5204, EL5205, EL5304 SOT-23 Package Outline Drawing 15 FN7332.5 October 26, 2005 EL5104, EL5105, EL5204, EL5205, EL5304 QSOP Package Outline Drawing NOTE: The package drawing shown here may not be the latest version. To check the latest revision, please refer to the Intersil website at http://www.intersil.com/design/packages/index.asp 16 FN7332.5 October 26, 2005 EL5104, EL5105, EL5204, EL5205, EL5304 Small Outline Transistor Plastic Packages (SC70-5) P5.049 D VIEW C e1 5 LEAD SMALL OUTLINE TRANSISTOR PLASTIC PACKAGE INCHES 5 SYMBOL 4 E CL 1 2 CL 3 e E1 b CL 0.20 (0.008) M C C CL A A2 SEATING PLANE A1 -C- PLATING b1 0.043 0.80 1.10 - 0.004 0.00 0.10 - A2 0.031 0.039 0.80 1.00 - b 0.006 0.012 0.15 0.30 - b1 0.006 0.010 0.15 0.25 c 0.003 0.009 0.08 0.22 6 c1 0.003 0.009 0.08 0.20 6 D 0.073 0.085 1.85 2.15 3 E 0.071 0.094 1.80 2.40 - E1 0.045 0.053 1.15 1.35 3 e 0.0256 Ref 0.65 Ref - e1 0.0512 Ref 1.30 Ref - L2 c1 NOTES 0.031 0.010 0.018 0.017 Ref. 0.26 0.46 4 0.420 Ref. 0.006 BSC 0o N c MAX 0.000 α WITH MIN A L b MILLIMETERS MAX A1 L1 0.10 (0.004) C MIN - 0.15 BSC 8o 0o 5 8o - 5 5 R 0.004 - 0.10 - R1 0.004 0.010 0.15 0.25 Rev. 2 9/03 NOTES: BASE METAL 1. Dimensioning and tolerances per ASME Y14.5M-1994. 2. Package conforms to EIAJ SC70 and JEDEC MO-203AA. 4X θ1 3. Dimensions D and E1 are exclusive of mold flash, protrusions, or gate burrs. R1 4. Footlength L measured at reference to gauge plane. 5. “N” is the number of terminal positions. R GAUGE PLANE SEATING PLANE L C L1 α L2 6. These Dimensions apply to the flat section of the lead between 0.08mm and 0.15mm from the lead tip. 7. Controlling dimension: MILLIMETER. Converted inch dimensions are for reference only. 4X θ1 VIEW C All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com 17 FN7332.5 October 26, 2005