Not for New Design ELM/EBM www.vishay.com Vishay Roederstein Aluminum Capacitors Axial Capacitors Style FEATURES • • • • • • Polarized aluminum electrolytic capacitors High CU product Miniature size Charge/discharge proof High ripple current capability Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • General purpose, industrial electronics, audio/video systems • Coupling, smoothing, filtering, buffering and timing • Portable and mobile units • Vibration and shock resistant QUICK REFERENCE DATA DESCRIPTION Nominal case size (Ø D x L) Rated capacitance range CR Capacitance tolerance Rated voltage range Category temperature range Endurance test at upper category temp. Useful life at 105 °C and IR applied Useful life at 85 °C and IR applied Useful life at 40 °C and IR applied Shelf life at (0 V, upper category temperature) Failure rate (0.8 UR, 40 °C) Based on sectional specification UNIT mm μF % V °C h h h h h 10-9/h VALUE 4.5 x 10 6 x 10 to 10 x 25 1.0 to 2200 ± 20 6.3 to 100 - 40 to + 85 1000 500 750 2500 70 000 500 130 IEC 60384-4/EN 130300 Similar to CECC 30301-044, similar to DIN 45910 part 126, without quality assessment 40/085/56 GPF Based on detailed specifications Climatic category IEC 68068 SELECTION CHART FOR CR, UR > 100 V, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) UR (V) CR (μF) 6.3 10 16 25 40 50 63 100 1.0 2.2 4.7 10 22 33 47 100 220 470 680 1000 1500 2200 8 x 18 10 x 18 10 X 25 ELM 4.5 x 11 6 x 10 6.5 x 18 8 x 18 10 x 18 10 x 25 - 8 x 18 10 x 18 10 x 25 - 4.5 x 11 4.5 x 11 6 x 10 6.5 x 18 10 x 18 10 x 25 - 4.5 x 11 6 x 10 6.5 x 18 10 x 18 10 x 25 - EBM - 4.5 x 11 6 x 10 6.5 x 18 8 x 18 10 x 25 - 4.5 x 11 4.5 x 11 4.5 x 11 6 x 10 6.5 x 18 8 x 18 10 x 25 - Revision: 12-Dec-12 Document Number: 25112 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Design ELM/EBM www.vishay.com Vishay Roederstein DIMENSIONS in millimeters AND AVAILABLE FORMS B L Ød + ØD Ød L A ØD DIMENSIONS in millimeters, MASS, PACKAGING QUANTITIES, AND ORDERING CODE PACKAGING, ENDING OF ORDERING CODE, QUANTITIES NOMINAL CASE SIZE ØDxL Ød Ø Dmax. Lmax. Amin. B MASS APPROX. g CODE PCS. CODE PCS. 4.5 x 11 0.6 5 11.0 15 63.5 ± 1.5 0.5 ..A0W 3000 ..B0W 1000 6 x 10 0.6 6.3 10.5 15 63.5 ± 1.5 0.7 ..A0W 1000 ..B0W 1000 TAPED ON REEL TAPED AMMO 6.5 x 18 0.8 6.9 18.5 25 73.0 ± 1.6 1.3 ..A0W 1000 ..B0W 1000 8 x 18 0.8 8.5 18.5 25 73.0 ± 1.6 1.7 ..A0W 500 ..B0W 500 10 x 18 0.8 10.5 18.5 25 73.0 ± 1.6 2.5 ..A0W 500 ..B0W 500 10 x 25 0.8 10.5 25.0 30 73.0 ± 1.6 3.3 ..A0W 500 ..B0W 500 Note • Axial style capacitors are insulated. ORDERING EXAMPLE ELECTRICAL DATA SYMBOL DESCRIPTION UR Rated voltage CR Rated capacitance at 100 Hz tan Max. dissipation factor at 100 Hz RESR Equivalent series resistance at 100 Hz (calculated from tan max. and CR) Z Max. impedance at 10 kHz IR Rated alternating current (RMS) at 100 Hz and upper category temperature Ta Ambient temperature Tuc Upper category temperature RH Relative humidity P Ambient pressure The following table gives the ordering number. The 16th place of ordering code refers to packaging for axial lead capacitors: MALAEBM00GD422B...EBM MALAEBM00GD422BA0W MALAEBM00GD422BB0W 2200 μF 6.3 V 10 x 25 A = taped on reel B = taped ammo Please see Dimensions table for available versions. Note • Unless otherwise specified, all electrical values apply at Ta = 20 °C, P = 80 kPa to 106 kPa, RH = 45 % to 75 %. Revision: 12-Dec-12 Document Number: 25112 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Design ELM/EBM www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 6.3 CR 100 Hz (μF) NOMINAL CASE SIZE ØDxL (mm) tan 100 Hz MAX. RESR 100 Hz () Z 10 kHz MAX. () IR 100 Hz TUC (A) CATALOG NUMBER MALA... 1000 8 x 18 0.25 0.400 0.500 0.44 EBM00FL410BB0W 1500 10 x 18 0.25 0.270 0.320 0.56 EBM00GL415BB0W 2200 10 x 25 0.29 0.210 0.160 0.71 EBM00GD422BB0W 100 4.5 x 11 0.20 3.200 2.000 0.10 ELM00BA310CB0W 220 6 x 10 0.20 1.500 0.910 0.16 EBM00CK322CB0W 470 6.5 x 18 0.20 0.680 0.430 0.31 EBM00DL347CB0W 680 8 x 18 0.20 0.470 0.290 0.40 EBM00FL368CB0W 1000 10 x 18 0.20 0.320 0.200 0.55 EBM00GL410CB0W 1500 10 x 25 0.23 0.250 0.180 0.69 EBM00GD415CB0W 470 8 x 18 0.16 0.550 0.340 0.38 EBM00FL347DB0W 680 10 x 18 0.16 0.380 0.240 0.50 EBM00GL368DB0W 10 16 1000 10 x 25 0.16 0.260 0.180 0.66 EBM00GD410DB0W 33 4.5 x 11 0.14 6.700 3.500 0.07 ELM00BA233EB0W 47 4.5 x 11 0.14 4.800 2.600 0.08 ELM00BA247EB0W 100 6 x 10 0.14 2.300 1.200 0.15 EBM00CK310EB0W 220 6.5 x 18 0.14 1.000 0.550 0.25 EBM00DL322EB0W 470 10 x 18 0.14 0.480 0.260 0.45 EBM00GL347EB0W 680 10 x 25 0.14 0.330 0.180 0.56 EBM00GD368EB0W 22 4.5 x 11 0.11 8.000 3.200 0.06 ELM00BA222GB0W EBM00CK247GB0W 25 40 47 6 x 10 0.11 3.800 1.500 0.11 100 6.5 x 18 0.11 1.800 0.700 0.19 EBM00DL310GB0W 220 10 x 18 0.11 0.800 0.320 0.33 EBM00GL322GB0W 470 10 x 25 0.11 0.370 0.160 0.52 EBM00GD347GB0W 10 4.5 x 11 0.08 13.000 5.500 0.05 ELM00BA210JB0W 22 6 x 10 0.08 5.800 2.500 0.09 EBM00CK222JB0W 47 6.5 x 18 0.08 2.700 1.200 0.15 EBM00DL247JB0W 100 8 x 18 0.08 1.300 0.550 0.25 EBM00FL310JB0W 220 10 x 25 0.08 0.600 0.250 0.43 EBM00GD322JB0W 1.0 4.5 x 11 0.08 130.000 90.000 0.01 ELM00BA110LB0W 2.2 4.5 x 11 0.08 58.000 41.000 0.02 ELM00BA122LB0W 4.7 4.5 x 11 0.08 27.000 19.000 0.03 ELM00BA147LB0W 10 6 x 10 0.08 13.000 9.000 0.07 EBM00CK210LB0W 22 6.5 x 18 0.08 5.800 4.100 0.10 EBM00DL222LB0W 47 8 x 18 0.08 2.700 1.900 0.16 EBM00FL247LB0W 100 10 x 25 0.08 1.300 0.900 0.30 EBM00GD310LB0W 63 100 ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE UR 100 V Us = 1.15 x UR - URev 1 V UR 100 V UR, 300 s IL/μA 0.002 x CR/μF x UR/V + 3 Voltage Surge voltage Reverse voltage Current Leakage current Revision: 12-Dec-12 Document Number: 25112 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Design ELM/EBM www.vishay.com Vishay Roederstein LOW TEMPERATURE BEHAVIOUR Table for the calculation of the maximum 10 kHz impedance at low temperatures: Tabular value Z 10 kHz = ----------------------------------C R μF RATED VOLTAGE (V) TA (°C) 6.3 10 16 25 40 50 63 100 - 25 2100 1600 1250 680 390 375 240 200 - 40 7600 5700 3500 1870 1150 1100 650 500 In practical operation the lower limit of the series resistance and impedance is given by the ohmic part of the contact points and the foil resistance values. Therefore it will not always be possible to achieve calculated values below 0.05 . LIFETIME TABLE UR 100 V INTERRELATION BETWEEN ALTERNATING CURRENT, AMBIENT TEMPERATURE, AND LIFETIME I/IR (frequency dependent) LIFETIME MULTIPLIER L (depending on I/IR and Ta) FREQUENCY [Hz] AMBIENT TEMPERATURE Ta [°C] 50 100 250 500 1000 40 45 50 55 60 65 70 75 80 0 0 0 0 0 > 2500 10 K 0 0 56 35 23 15 9.7 6.4 4.3 3.0 2.0 1.42 1.00 0.71 0.51 0.37 85 90 95 100 105 0.18 0.20 0.22 0.23 0.24 0.25 0.26 54 34 22 14 9.4 6.3 4.2 2.9 2.0 1.40 0.98 0.70 0.50 0.36 0.36 0.40 0.44 0.46 0.48 0.50 0.52 49 31 20 13 8.8 5.9 4.0 2.7 1.9 1.33 0.94 0.67 0.48 0.35 0.54 0.60 0.66 0.69 0.72 0.75 0.78 43 28 18 12 8.0 5.4 3.7 2.5 1.8 1.24 0.88 0.63 0.45 0.33 0.72 0.80 0.88 0.92 0.96 1.00 1.04 36 24 16 10 7.0 4.8 3.3 2.3 1.6 1.13 0.80 0.58 0.42 0.31 0.90 1.00 1.10 1.15 1.20 1.25 1.30 29 19 13 8.8 6.0 4.1 2.9 2.0 1.4 1.00 0.72 0.52 0.38 0.28 1.08 1.20 1.32 1.38 1.44 1.50 1.56 23 16 11 7.3 5.0 3.5 2.4 1.7 1.2 0.88 0.63 0.46 0.34 1.26 1.40 1.54 1.61 1.68 1.75 1.82 18 12 8.5 5.9 4.1 2.9 2.0 1.5 1.0 0.75 0.55 0.40 0.29 1.44 1.60 1.76 1.84 1.92 2.00 2.08 13 9.4 6.6 4.7 3.3 2.3 1.7 1.2 0.87 0.64 0.47 0.34 1.62 1.80 1.98 2.07 2.16 2.25 2.34 10 7.1 5.1 3.6 2.6 1.9 1.4 1.0 0.72 0.53 0.39 0.29 1.80 2.00 2.20 2.30 2.40 2.50 2.60 7.3 5.3 3.8 2.8 2.0 1.5 1.1 0.80 0.59 0.43 0.32 1.98 2.20 2.42 2.53 2.64 2.75 2.86 5.3 3.9 2.9 2.1 1.6 1.2 0.85 0.63 0.47 0.35 2.16 2.40 2.64 2.76 2.88 3.00 3.12 3.8 2.8 2.1 1.6 1.2 0.89 0.66 0.50 0.37 0.28 2.34 2.60 2.86 2.99 3.12 3.25 3.38 2.7 2.1 1.6 1.2 0.89 0.67 0.51 0.39 0.29 2.52 2.80 3.08 3.22 3.36 3.50 3.64 1.9 1.5 1.1 0.87 0.67 0.51 0.39 0.30 2.70 3.00 3.30 3.45 3.60 3.75 3.90 1.4 1.1 0.82 0.64 0.49 0.38 0.30 2.88 3.20 3.52 3.68 3.84 4.00 4.16 0.95 0.75 0.59 0.46 0.36 0.28 3.06 3.40 3.74 3.91 4.08 4.25 4.42 0.66 0.53 0.42 0.34 3.24 3.60 3.96 4.14 4.32 4.50 4.68 0.46 0.37 3.42 3.80 4.18 4.37 4.56 4.75 4.94 0.32 combination not permitted Note IR 100 Hz alternating current [A] at upper category temperature TUC taken from datasheet I User current [A] Ta Ambient temperature of capacitor [°C] L Lifetime multiplier Regard L as a function of ambient temperature (x-axis) and of current (y-axis); use the current-axis according to the frequency Revision: 12-Dec-12 Document Number: 25112 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Design ELM/EBM www.vishay.com Vishay Roederstein TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST Endurance Useful life Shelf life (storage at high temperature) Revision: 12-Dec-12 REFERENCE IEC 60384-4/ EN 130300 subclause 4.13 CECC 30301 subclause 1.8.1 IEC 60384-4/ EN 130300 subclause 4.17 PROCEDURE (quick reference) REQUIREMENTS TA = Upper cat. temp.; UR applied 6.3 V UR 100 V: 1000 h UR = 6.3 V: - 40 % C/C 25 % UR > 6.3 V: - 30 % C/C 30 % tan 1.5 x spec. limit TA = 85 °C; UR applied Z 3 x spec. limit IL (300 s) spec. limit Ta = 105 °C; UR and IR applied; 6.3 V UR 100 V Cases 4.5 x 11: 500 h Cases 6 x 10 to 10 x 25: 750 h UR = 6.3 V: - 50 % C/C 45 % UR > 6.3 V: - 45 % C/C 45 % tan 3 x spec. limit Z 3 x spec. limit Ta = 85 °C; UR and IR applied IL (300 s) spec. limit No short circuit, no open circuit Total failure percentage: 1 % Ta = Upper cat. temp.; no voltage applied 6.3 V UR 100 V Cases 4.5 x 11 to 10 x 25: 500 h UR = 6.3 V: - 40 % C/C 25 % UR > 6.3 V: - 30 % C/C 30 % tan 1.5 x spec. limit After test: UR to be applied for 30 min 24 h to 48 h before measurement Z 3 x spec. limit IL (300 s) 2 x spec. limit Document Number: 25112 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000