ISO 9001 CERTIFIED E-Series HMIC Double Balanced Mixer 1400 - 2000 MHz EMD40-1800H Features * SOIC-8 package * IC process * Low profile * LO Drive +13dBm to +17dBm Description M/A-COM’s EMD40-1800H is a passive double balanced mixer in a low cost, surface mount SOIC-8 package. Fabricated using a mature silicon process (HMIC), it is ideally suited for high volume cellular and wireless applications. Typical applications include frequency up/down conversion, modulation and demodulation in JDC (1500MHz), DCS (1800mhz), PHS (1900MHz) and PCS (1900MHz). Schematic Pin Configuration Pin 1 2 3 4 Function GND IF GND GND Pin 5 6 7 8 Function LO GND GND RF Ordering Information Part Number EMD40-1800H EMD40-1800HTR Packaging Tube Tape and Reel Specifications @ 25°C Frequency Range 1400 - 2000 MHz Conversion Loss Maximum Mean (x) 1400 - 1700 MHz 8.1 dB 6.76 dB 1700 - 2000 MHz 9.5 dB 7.86 dB L - R Isolation Minimum Typical 1400 - 1700 MHz 28.0 dB 33.0 dB 1700 - 2000 MHz 26.0 dB 28.5 dB L - I Isolation Minimum Typical 1400 - 1700 MHz 24.0 dB 26.9 dB 1700 - 2000 MHz 24.0 dB 26.8 dB LO VSWR Maximum Typical 1400 - 1700 MHz 4.50 3.85 1700 - 2000 MHz 4.00 3.36 RF VSWR Maximum Typical 1400 - 1700 MHz 3.50 1.92 1700 - 2000 MHz 2.40 1.52 IF VSWR Maximum Typical DC - 400 MHz 1.80 1.40 Input IP3 Minimum Typical 1400 - 1700 MHz 11.5 dBm 15.0 dBm 1700 - 2000 MHz 12.0 dBm 20.0 dBm DC - 500MHz IF 1.0 dB Bandwidth +7.0 dBm Input 1dB Compression Test conditions: LO drive = +17dBm, IF frequency = 60MHz. Mean and sigma calculated at 1500MHz and 1800MHz. Sigma (σ) .07 0.11 S1230B Specifications Subject to Change Without Notice AMP M/A-COM Eurotec * Loughmahon Technology Park * Blackrock * Cork * Ireland * Tel: 353-21-808300 * Fax: 353-21-359935 ISO 9001 CERTIFIED Typical Performance Over Extended Bandwidth (1100MHz - 2500MHz) Conversion Loss Isolation 40.00 5.00 LO to RF 35.00 30.00 7.00 +17dBm Isolation (dB) 8.00 +15dBm 9.00 +13dBm 10.00 25.00 LO to IF 20.00 15.00 10.00 5.00 11.00 VSWR 2500 2400 2300 2200 2100 2000 25.00 300 279 256 235 214 193 171 106 85.0 64.0 43.0 21.0 0.30 1900 IP3 and 1dB Compression IF Frequency (MHz) 22.50 20.00 4.5 LO IP3 RF 4 17.50 Power (dBm) 3.5 Isolation (dB) 1800 Frequency (MHz) Frequency (MHz) 5 1700 1600 1500 1400 1100 2500 2400 2300 2200 2100 2000 1900 1800 1700 1600 1500 1400 1300 1200 1100 1300 0.00 12.00 1200 Conversion Loss (dB) 6.00 3 2.5 2 IF 15.00 12.50 1 dB Compression 10.00 7.50 1.5 5.00 1 2.50 0.5 2500 2400 2200 2000 1800 1600 1400 2500 2400 2300 2200 2100 2000 1900 1800 1700 1600 1500 1400 1300 1200 1100 1200 0.00 0 Frequency (MHz) RF anf LO Frequency (MHz) Note: Conversion loss measured with fixed IF frequency of 60MHz. All measurements made with input power of +17dBm. Spurious Table (In dBc below IF, assuming down conversion) RF (n) 0 1 2 3 4 X 11 57 64 89 0 nfLO + mfRF 4 7 2 0 30 32 47 66 50 73 66 60 88 81 82 1 2 3 38 X 42 11 52 57 70 64 88 90 4 0 LO (m) nfLO - mfRF 4 6 2 0 27 12 44 58 44 56 65 60 81 85 80 1 2 3 Absolute Maximum Ratings 38 30 60 70 87 4 Parameter RF Input Power LO Drive Power Operating/Storage Temp. Absolute Maximum +27dBm +27dBm -40°C to +85°C RF = 1842.5 MHz, -5dBm LO = 1772.5 MHz, +17dBm S 1230B Specifications Subject to Change Without Notice AMP M/A-COM Eurotec * Loughmahon Technology Park * Blackrock * Cork * Ireland * Tel: 353-21-808300 * Fax: 353-21-359935