Metallized Polypropylene Film Capacitors EMPP Series (Box type) MERITEK FEATURES • • • Non-inductive construction Self-healing properties Flame retardant plastic case and epoxy resin (In compliance with UL94V-0) High moisture resistance Good solderability • • SPECIFICATIONS 1. Operating temperature: -40oC to +105oC 2. Capacitance range: 3. Capacitance tolerance: 0.01μF to 2.2μF ±5%(J), ±10%(K), ±20%(M) 4. Rated voltage: 250VDC, 400VDC, 630VDC 5. Dissipation factor: 6. Insulation resistance: 0.1% max. (1KHz) o 25 C <0.33μF>30,000MΩ o 25 C >0.33μF<10,000 μF • M Ω EMPP are constructed with metallized polypropylene film dielectric, tinned copper leads, plastic casing, and epoxy resin for sealing. They are designed for critical applications wherein reliable operation at high current induced levels is required. EMPP have a high dv/dt ratio while exhibiting low loss, high capacitance stability and long life. *Voltage derated at operating temperature >85oC PART NUMBERING SYSTEM EMPP 104 J 2E Meritek Series 0.5 Capacitance 103 10,000 10 0.01 104 100,000 100 0.1 105 106 1000 1 10 0.5 H Tolerance CODE Tolerance (%) J ±5 K ± 10 2G 400V 2J 630V M ± 20 2E 250V 0.5 d Rated Voltage CODE T 25(MIN) CODE ( pF ) ( nF ) ( μF ) W P 0.5 Tape & Reel / Tape & Ammo available for lead space <10 mm Please contact factory for part number Dimensions in millimeters (mm) Rated Voltage DIM. 250VDC CASE 400VDC 630VDC W T H P dØ CASE CAP (μF) 0.010 C1 C1 C2 C1 13.0 4.0 9.0 10.0 0.6 0.015 C1 C1 C3 C2 13.0 5.0 11.0 10.0 0.6 0.022 C1 C2 D1 C3 13.0 6.0 12.0 10.0 0.6 0.033 C1 C2 D2 D1 18.0 5.0 11.0 15.0 0.6 0.047 C1 C3 D3 D2 18.0 6.0 12.0 15.0 0.8 0.068 C2 D2 D4 D3 18.0 7.5 13.5 15.0 0.8 0.1 C3 D3 E2 D4 18.0 8.5 14.5 15.0 0.8 0.8 0.15 D2 D4 E3 E1 26.5 6.0 15.0 22.5 0.22 D2 E2 F1 E2 26.5 7.0 16.5 22.5 0.8 0.33 D3 E3 F2 E3 26.5 8.5 17.0 22.5 0.8 0.47 E2 E4 F3 E4 26.5 10.0 19.0 22.5 0.8 0.68 E2 F1 F1 32.0 11.0 20.0 27.5 0.8 1.0 E4 F2 F2 32.0 13.0 22.0 27.5 0.8 1.5 F1 F3 F3 32.0 15.0 30.0 27.5 0.8 2.2 F2 Custom sizes and lead spacing available upon request Custom values and tolerances available upon request Specifications are subject to change without notice. rev.6a