Open your Eyes™ EqcoLogic Transceivers for CoaXPress® Camera Solutions CoaXPress (CXP) is an asymmetric high speed point to point serial communication standard for the transmission of video and still images, scalable over single or multiple coaxial cables. This solution supports a high speed downlink of up to 6.25Gbps per cable for video and images, plus a lower speed, 20Mbps, uplink for communications and control. Video transmission, power and data (control) are simultaneous over a single cable. Cable lengths of greater than 100m may be achieved. EqcoLogic Transceiver Devices The figure shows the integration of EqcoLogic transceivers in a typical camera/frame grabber configuration. The CoaXPress system uses the asymmetric (high speed one way, low speed the other) transceivers to transmit image data from the camera and control signals and triggering information from the frame grabber. The system also supports transmission of power from the frame grabber to the camera, making local power supplies unnecessary. The product family supports variety of data rates: EQCO62T20: transmits ≤ 6.25Gbit/s; receives ≤ 20Mbit/s EQCO31T20: transmits ≤ 3.125Gbit/s; receives ≤ 20Mbit/s EQCO62R20: receives ≤ 6.25Gbit/s; transmits ≤20Mbit/s) EQCO31R20:receives ≤ 3.125Gbit/s; transmits ≤ 20Mbit/s) Standardization Higher speed image transmission can be supported by using multiple CoaXPress links in parallel. For example, the fastest CoaXPress solutions today use four channels, offering up to 25Gbit/s downlink bandwidth. CoaXPress has been standardized by JIIA and has been accepted as a world standard by the G3 group including AIA and EMVA. The original CoaXPress technology was developed by EqcoLogic, together with other members of the CoaXPress consortium, including Adimec and Active Silicon. www.eqcologic.com CoaXPress Transceiver 1.0 ©2011 Multiple cable links Technical Specifications CoaXPress Interface Downlink Data Throughput 1.25 – 6.25 Gbps (EQCO62x20) / 1.25 – 3.125 Gbps (EQCO31x20) Uplink Data Throughput 20 Mbps Power Over Coax Up to 13 W Characteristics Power supply Single 1.2 V supply Power Consumption 70 mW per chip Temperature Range -40 - +85 ˚C Package 16 pin QFN 4 mm, Pb-free and RoHS compliant Performance Performance Specifications Sales Contact: Zeph Freeman: phone +1 -972-345-3477 Email: [email protected] EqcoLogic NV/SA Brussels Business Base Ransbeekstraat 230 1120 Brussels, Belgium Sales Contact: Peter Helfet: phone +32 2 629 1301 Email: [email protected]