Thick Film Chip Resistors / Low Resistance Type Thick Film Chip Resistors / Low Resistance Type ERJ R, B : 0402, 0603, 0805, 1206, 1210, 1812, 2512 ERJ L : 0603, 0805, 1206, 1210, 1812, 2010, 2512 Type: ERJ 2B, 3R, 3B, 6R, 6B, 8R, 8B, 14R, 14B, 12R, 1TR ERJ L03, L06, L08, L14, L12, L1D, L1W ■ Features ● Small size and lightweight ● High reliability Metal glaze thick film resistive element and three layers of electrodes ● Suitable for both reflow and flow soldering ● Low Resistance Value ERJ2BW Type : 47 m액 to 91 m액 ERJ6BW, 8BW Type : 10 m액 to 47 m액 ERJ2BS, 2BQ Type : 0.1 액 to 1.0 액 ERJ3R, 3B, 6R, 6B, 8R, 8B, 14R, 14B, 12R, 1TR Type : 0.1 액 to 9.1 액 ERJL03, L06, L08 Type : 47 m액 to 100 m액 ERJL14, L12 Type : 20 m액 to 100 m액 ERJL1D, L1W Type : 40 m액 to 100 m액 ● Reference Standards IEC 60115-8, JIS C 5201-8 ■ Explanation of Part Numbers ● ERJ2BS/2BQ, 3R, 3B, 6R, 6B, 8R, 8B, 14R, 14B, 12R, 1TR Series 1 2 3 4 5 6 7 8 9 10 11 E R J 8 R Q F R 2 2 V Product Code Thick Film Chip Resistors Size, Power Rating Type: inches Power R. 2B : 0402 0.125 W 3R : 0603 0.1 W 3B : 0603 0.2 W 6R : 0805 0.125 W 6B : 0805 0.25 W 8R : 1206 0.25 W 8B : 1206 0.33 W 14R : 1210 0.25 W 14B : 1210 0.5 W 12R : 1812 0.5 W 1TR : 2512 1W Resistance Value Res. VAlue Code S 0.1 액 to 0.2 액 Q 0.22 액 to 9.1 액✽ ✽ 2B : 0.22 액 to 1.0 액 Resistance Tolerance Code F G J Tolerance ±1% ±2% ±5% Code X V U Packaging Methods Packaging Punched Carrier Taping 2 mm pitch (2BS/2BQ) Punched Carrier Taping (3R, 3B, 6R, 6B, 8R, 8B) Embossed Carrier Taping (14R, 14B, 12R, 1TR) Resistance Value Shown by 3 digits or letters. (Ex.) R22 : 0.22 액 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Feb. 2007 Thick Film Chip Resistors / Low Resistance Type ● ERJ2BW, 6BW, 8BW Series 1 2 3 4 5 6 7 8 9 10 11 12 E R J 2 B W G R 0 4 7 X Code Size:inches Power Rating 0.125 W 2BW 0402 0.25 W 6BW 0805 0.5 W 8BW 1206 Product Code Thick Film Chip Resistors Resistance Tolerance Resistance Value 47 m액 to 91 m액 10 m액 to 47 m액 10 m액 to 47 m액 Code F G J Code Tolerance ±1% ±2% ±5% X V Packaging Methods Packaging Pressed Carrier Taping 2 mm pitch (2BW) Punched Carrier Taping (6BW, 8BW) Resistance Value Shown by 4 digits or letters. (Ex.) R047 : 0.047 액=47 m액 ● ERJL03, L06, L08, L14, L12, L1D, L1W Series 1 2 3 4 5 6 7 8 9 10 11 12 E R J L 1 4 K J 5 0 M U Product Code Thick Film Chip Resistors Size, Power Rating Type: inches Power R. L03 : 0603 0.1 W L06 : 0805 0.125 W L08 : 1206 0.25 W L14 : 1210 0.33 W L12 : 1812 0.5 W L1D : 2010 0.5 W L1W : 2512 1W Std. ✽ 20 m액, 22 m액, 33 m액, K 39 m액, 47 m액, 50 m액, 100 m액 U 20 m액 to 100 m액✽ ✽ L03, L06, L08 : 47 m액 to 100 m액 L1D, L1W : 40 m액 to 100 m액 ( ■ Construction Packaging Methods Packaging Punched Carrier Taping (L03, L06, L08) Embossed Carrier Taping (L14, L12, L1D, L1W) Resistance Tolerance Res. Value Code ) Code F J Code Tolerance ±1% ±5% V U Resistance Value Shown by 3 digits or letters. (Ex.) 50 M:50 m액, 10 C:100 m액 ■ Dimensions in mm (not to scale) L a W t Protective coating b Alumina substrate Electrode (Inner) Electrode (Between) Thick film resistive element Electrode (Outer) Type (inches) Dimensions (mm) L W a b Mass(Weight) [g/1000 pcs.] t ±0.10 ERJ2BW (0402) 1.00 ±0.10 0.50 +0.10 0.24±0.10 0.35 ±0.05 –0.05 0.24 0.8 ERJ2BS ±0.10 (0402) 1.00 ±0.10 0.50 +0.10 0.27±0.10 0.35 ±0.05 –0.05 0.20 ERJ2BQ 0.8 ERJ3R ERJ3B (0603) ERJL03 ERJ6BW(0805) ERJ6R ERJ6B (0805) ERJL06 ERJ8BW(1206) ERJ8R ERJ8B (1206) ERJL08 ERJ14R ERJ14B (1210) ERJL14 ERJ12R (1812) ERJL12 ±0.20 0.30 ±0.15 0.45 ±0.10 1.60 ±0.15 0.80 +0.15 –0.05 0.30 2 2.00 ±0.20 1.25 ±0.20 0.55 ±0.20 0.55 ±0.20 0.65 ±0.10 6 2.00 ±0.20 1.25 ±0.10 0.40 ±0.20 0.40 ±0.20 0.60 ±0.10 4 3.20 ±0.20 1.60 ±0.20 1.00 ±0.20 1.00 ±0.20 0.65 ±0.10 13 +0.05 ±0.20 0.50 ±0.20 0.60 ±0.10 3.20 +0.05 –0.20 1.60 –0.15 0.50 10 3.20 ±0.20 2.50 ±0.20 0.50 ±0.20 0.50 ±0.20 0.60 ±0.10 16 4.50 ±0.20 3.20 ±0.20 0.50 ±0.20 0.50 ±0.20 0.60 ±0.10 27 ERJL1D (2010) 5.00 ±0.20 2.50 ±0.20 0.60 ±0.20 0.60 ±0.20 0.60 ±0.10 27 ±0.20 ±0.20 ±0.20 ±0.20 ±0.10 6.40 3.20 0.65 0.60 0.60 ERJ1TR (2512) ERJL1W 6.40 ±0.20 3.20 ±0.20 0.65 ±0.20 1.30 ±0.20 1.10 ±0.10 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 45 79 Feb. 2007 Thick Film Chip Resistors / Low Resistance Type ■ Ratings <Low resistance type> Category Temperature Range ERJL03 (0603) ERJL06 (0805) ERJL08 (1206) Power Rating at 70 °C (W) 0.1 (0.2) ✽1 0.125 (0.25) ✽1 0.25 (0.33) ✽1 ERJL14 (1210) 0.33 ±1, ±5 20 m to 100 m ✽2 ERJL12 (1812) 0.5 ±1, ±5 20 m to 100 m ✽2 R<47 m액:±300 –55 to +125 0.5 ±1, ±5 40 m to 100 m ✽2 R >47 m액:±100 –55 to +125 1 ±1, ±5 40 m to 100 m ✽2 Type (inches) ERJL1D (2010) ERJL1W (2512) Resistance Tolerance (%) Resistance Range (액) ±1, ±5 47 m to 100 m ✽2 ±200 –55 to +125 ±1,±5 47 m to 100 m ✽2 ±100 –55 to +125 ±1, ±5 47 m to 100 m ✽2 ±100 –55 to +125 T.C.R. (Operating Temperature Range) [҂10 –6/°C (ppm/°C)] (°C) –55 to +125 –55 to +125 ✽1 Please contact us when resistors with guaranteed high power are needed. ✽2 Standard R.V. : 20 m액, 22 m액, 33 m액, 39 m액, 47 m액, 50 m액, 100 m액, Custom R.V. : Each 1 m액 within upper range. <High power type> Type (inches) ERJ2BW ERJ2BS ERJ2BQ ERJ3BS (0402) (0402) (0402) (0603) ERJ3BQ (0603) Power Rating at 70 °C (W) 0.125 Resistance Tolerance (%) ±2, ±5 ±1, ±2, ±5 0.2 ±1, ±2, ±5 ERJ6BW (0805) ERJ6BS (0805) 0.01 to 0.047 (E24) 0.25 ±1, ±2, ±5 ERJ6BQ (0805) ERJ8BW (1206) 0.50 ±1, ±2, ±5 0.33 ±1, ±2, ±5 ERJ8BS (1206) ERJ8BQ (1206) ERJ14BS (1210) ERJ14BQ (1210) Resistance Range (액) 0.047 to 0.091 (E24) 0.10 to 0.20 (E24) 0.22 to 1.0 (E24) 0.10 to 0.20 (E24) 0.22 to 0.91 (E24) 1.0 to 9.1 (E24) 0.5 ±1, ±2, ±5 0.10 to 0.20 (E24) 0.22 to 0.91 (E24) 1.0 to 9.1 (E24) 0.01 to 0.047 (E24) 0.10 0.22 1.0 0.10 0.22 1.0 to to to to to to 0.20 0.91 9.1 0.20 0.91 9.1 (E24) (E24) (E24) (E24) (E24) (E24) Category Temperature Range T.C.R. (Operating Temperature Range) [҂10 /°C (ppm/°C)] (°C) –6 ±300 –55 to +125 ±250 ±300 –55 to +125 ±200 R<0.015 액:±300 R>0.015 액:±200 –55 to +155 ±250 –55 to +125 ±200 R<0.020 액:±200 R>0.020 액:±150 –55 to +155 ±250 –55 to +125 ±200 ±200 –55 to +125 ±100 <Standard type> Type (inches) Power Rating at 70 °C (W) Resistance Tolerance (%) 0.1 ±1, ±2, ±5 ERJ3RS (0603) ERJ3RQ (0603) ERJ6RS (0805) ERJ6RQ (0805) 0.125 ±1, ±2, ±5 ERJ8RS (1206) ERJ8RQ (1206) 0.25 ±1, ±2, ±5 ERJ14RS (1210) ERJ14RQ (1210) 0.25 ±1, ±2, ±5 ERJ12RS (1812) ERJ12RQ (1812) 0.5 ±1, ±2, ±5 ERJ1TRS (2512) ERJ1TRQ (2512) 1 ±1, ±2, ±5 Resistance Range (액) 0.10 to 0.20 (E24) 0.22 to 0.91 (E24) 1.0 to 9.1 (E24) 0.10 to 0.20 (E24) 0.22 to 0.91 (E24) 1.0 to 9.1 (E24) 0.10 to 0.20 (E24) 0.22 to 0.91 (E24) 1.0 to 9.1 (E24) 0.10 to 0.20 (E24) 0.22 to 0.91 (E24) 1.0 to 9.1 (E24) 0.10 to 0.20 (E24) 0.22 to 0.91 (E24) 1.0 to 9.1 (E24) 0.10 to 0.20 (E24) 0.22 to 0.91 (E24) 1.0 to 9.1 (E24) Category Temperature Range T.C.R. (Operating Temperature Range) [҂10 –6/°C (ppm/°C)] (°C) ±300 –55 to +125 ±200 ±250 –55 to +125 ±200 ±250 –55 to +125 ±200 ±200 –55 to +125 ±100 ±200 –55 to +125 ±100 ±200 –55 to +125 ±100 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Feb. 2007 Thick Film Chip Resistors / Low Resistance Type –55 °C 100 Rated Load (%) Power Derating Curve For resistors operated in ambient temperatures above 70 °C, power rating shall be derated in accordance with the figure on the right. 70 °C 80 60 2B, 3R, 3B, 6R, 6B, 8R, 8B, 14R, 14B, 12R, 1TR, L03, L06, L08, L14, L12, L1D, L1W 40 125 °C 0 –60 –40 –20 0 Kind of Taping Pressed Carrier Taping ERJ2BS, 2BQ ERJ3R, 3B, L03 20 40 60 80 100 120 140 160 180 Ambient Temperature (°C) ● Standard Quantity Type 155 °C 20 ■ Packaging Methods (Taping) ERJ2BW 6BW, 8BW Pitch (P1) Quantity 2 mm 10000 pcs./reel Punched Carrier Taping ERJ6R, 6B, L06 ERJ8R, 8B, L08 5000 pcs./reel ERJ14R, 14B, L14 4 mm ERJ12R, L12 ERJL1D Embossed Carrier Taping ERJ1TR 4000 pcs./reel ERJL1W 3000 pcs./reel ● Carrier Tape (Unit : mm) Punched Carrier P1 Embossed Carrier P2 P0 fD0 B W F E Pressed Carrier T P1 (2 mm pitch) A T T fD1 (Only Emboss) Type A B ±0.10 ERJ2BW 0.67 1.17 ERJ2BS, 2BQ 0.67±0.05 1.17±0.05 ±0.10 ±0.05 ERJ3R, 3B, L03 1.10 ERJ6BW 1.55 ±0.15 2.30 ±0.20 ±0.15 ±0.20 ERJ6R, 6B, L06 1.65 W F E P1 P2 fD 0 P0 1.90 2.50 ERJ8BW, 8R, 8B, L08 2.00 ±0.15 3.60 ±0.20 ±0.20 ±0.20 ERJ14R, 14B, L14 2.80 ERJ12R, L12 3.50 ±0.20 4.80 ±0.20 ERJL1D 2.80 ±0.20 5.30 ±0.20 ERJ1TR 3.60 ±0.20 6.90 ±0.20 ERJL1W 3.60 ±0.20 6.90 ±0.20 3.50 ±0.05 – 0.52±0.05 – ±0.05 – 0.61 2.00 ±0.10 8.00 ±0.20 0.70 3.50 ±0.05 – 0.84 1.75 ±0.10 8.00 fD1 T ±0.10 ±0.30 2.00 ±0.05 4.00 4.00 ±0.10 ±0.05 +0.10 1.50−0 – – ±0.10 1.0 +0.10 −0 1.00 ±0.10 12.00 ±0.30 5.50 ±0.20 1.5 min. 1.60 ±0.10 ● Taping Reel (Unit : mm) T fB fC fA W Type ERJ2B ERJ3R, 3B, L03 ERJ6R, 6B, L06 ERJ8R, 8B, L08 ERJ14R, 14B, L14 ERJ12R, L12 ERJL1D ERJ1TR ERJL1W fA fB fC W T 9.0 ±1.0 11.4±1.0 ±1.0 180.0 +0 –3.0 60 min. 13.0 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 13.0 ±1.0 15.4±2.0 Feb. 2007 Thick Film Chip Resistors / Low Resistance Type ■ Recommended Land Pattern In case of flow soldering, the land width must be smaller than the Chip Resistor width to control the solder amount properly. Generally, the land width should be 0.7 to 0.8 times (W) of the width of chip resistor. In case of reflow soldering, solder amount can be adjusted, therefore the land width should be set to 1.0 to 1.3 times chip resistor width (W). Type (inches) c Chip Resistor a b ERJ2BW (0402) ERJ2B (0402) ERJ3R, 3B, L03 (0603) ERJ6BW (0805) ERJ6R, 6B, L06 (0805) ERJ8BW (1206) ERJ8R, 8B, L08 (1206) ERJ14R, 14B, L14 (1210) ERJ12R, L12 (1812) ERJL1D (2010) ERJ1TR (2512) ERJL1W (2512) a 0.52 0.5 to 0.6 0.7 to 0.9 0.9 1 to 1.4 1.2 2 to 2.4 2 to 2.4 3.3 to 3.7 3.6 to 4 5 to 5.4 3.6 to 4 Dimensions (mm) b 1.4 to 1.6 0.4 1.4 to 1.6 0.4 2 to 2.2 0.8 3.2 to 3.8 1.1 3.2 to 3.8 0.9 4.4 to 5 1.3 4.4 to 5 1.2 4.4 to 5 1.8 5.7 to 6.5 2.3 6.2 to 7 1.8 7.6 to 8.6 2.3 7.6 to 8.6 2.3 c to 0.6 to 0.6 to 1 to 1.4 to 1.4 to 1.8 to 1.8 to 2.8 to 3.5 to 2.8 to 3.5 to 3.5 ■ Recommended Soldering Conditions Recommendations and precautions are described below. ● Recommended soldering conditions for reflow · Reflow soldering shall be performed a maximum of two times. · Please contact us for additional information when used in conditions other than those specified. · Please measure the temperature of the terminals and study every kind of solder and printed circuit board for solderability before actual use. Temperature Peak Preheating Heating For soldering (Example : Sn/Pb) Preheating Main heating Peak Temperature 140 °C to 160 °C Above 200 °C 235 ± 5 °C Time 60 s to 120 s 30 s to 40 s max. 10 s For lead-free soldering (Example : Sn/Ag/Cu) Temperature Time Preheating 150 °C to 180 °C 60 s to 120 s Main heating Above 230 °C 30 s to 40 s Peak max. 260 °C max. 10 s Time ● Recommended soldering conditions for flow Preheating Soldering For soldering Temperature Time 140 °C to 180 °C 60 s to 120 s 245 ± 5 °C 20 s to 30 s For lead-free soldering Temperature Time 150 °C to 180 °C 60 s to 120 s max. 260 °C max. 10 s Safety Precautions The following are precautions for individual products. Please also refer to the precautions common to Fixed Resistors shown on page ER3 of this catalog. 1. Take measures against mechanical stress during and after mounting of Thick Film Chip Resistors (hereafter called the resistors) so as not to damage their electrodes and protective coatings. 2. If a transient load (heavy load in a short time) like a pulse is expected to be applied, check and evaluate the operations of the resistors when installed in your products before use. Never exceed the rated power. Otherwise, the performance and/or reliability of the resistors may be impaired. 3. Do not use halogen-based or other high-activity flux. Otherwise, the residue may impair the resistors' performance and/or reliability. 4. When soldering with a soldering iron, never touch the resistors' bodies with the tip of the soldering iron. When using a soldering iron with a high temperature tip, finish soldering as quickly as possible (within three seconds at 350 °C max.). 5. As the amount of applied solder becomes larger, the mechanical stress applied to the resistors increases, causing problems such as cracks and faulty characteristics. Avoid applying an excessive amount of solder. 6. Do not apply shock to the resistors or pinch them with a hard tool (e.g. pliers and tweezers). Otherwise, the resistors' protective coatings and bodies may be chipped, affecting their performance. 7. Avoid excessive bending of printed circuit boards in order to protect the resistors from abnormal stress. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Feb. 2007 Safety Precautions (Common precautions for Fixed Resistors) • When using our products, no matter what sort of equipment they might be used for, be sure to make a written agreement on the specifi cations with us in advance. The design and specifi cations in this catalog are subject to change without prior notice. • Do not use the products beyond the specifications described in this catalog. • This catalog explains the quality and performance of the products as individual components. Before use, check and evaluate their operations when installed in your products. • Install the following systems for a failsafe design to ensure safety if these products are to be used in equipment where a defect in these products may cause the loss of human life or other significant damage, such as damage to vehicles (au to mo bile, train, vessel), traffi c lights, medical equipment, aerospace equipment, elec tric heating appliances, combustion/gas equipment, rotating equipment, and disaster/crime prevention equipment. ✽ Systems equipped with a protection circuit and a protection device ✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault (1) Precautions for use • These products are designed and manufactured for general and stan dard use in general elec tron ic equipment (e.g. AV equipment, home electric ap plianc es, offi ce equipment, information and com mu ni cation equipment) • These products are not intended for use in the following special conditions. Before using the products, carefully check the effects on their quality and performance, and determine whether or not they can be used. 1. In liquid, such as water, oil, chemicals, or organic solvent 2. In direct sunlight, outdoors, or in dust 3. In salty air or air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2 4. Electric Static Discharge (ESD) Environment These components are sensitive to static electricity and can be damaged under static shock (ESD). Please take measures to avoid any of these environments. Smaller components are more sensitive to ESD environment. 5. Electromagnetic Environment Avoid any environment where strong electromagnetic waves exist. 6. In an environment where these products cause dew condensation 7. Sealing or coating of these products or a printed circuit board on which these products are mounted, with resin or other materials • These products generate Joule heat when energized. Carefully position these products so that their heat will not affect the other components. • Carefully position these products so that their temperatures will not exceed the category temperature range due to the effects of neighboring heat-generating components. Do not mount or place heat-generating components or inflammables, such as vinyl-coated wires, near these products . • Note that non- cleaning solder, halogen-based highly active fl ux, or water-soluble fl ux may deteriorate the performance or reliability of the products. • Carefully select a fl ux cleaning agent for use after soldering. An unsuitable agent may deteriorate the performance or reliability. In particular, when using water or a water-soluble cleaning agent, be careful not to leave water residues. Otherwise, the insulation performance may be deteriorated. (2) Precautions for storage The performance of these products, including the solderability, is guaranteed for a year from the date of arrival at your company, provided that they remain packed as they were when delivered and stored at a temperature of 5 °C to 35 ° C and a relative humidity of 45 % to 85 %. Even within the above guarantee periods, do not store these products in the following conditions. Otherwise, their electrical performance and/or solderability may be deteriorated, and the packaging materials (e.g. taping materials) may be deformed or deteriorated, resulting in mounting failures. 1. In salty air or in air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2 2. In direct sunlight <Package markings> Package markings include the product number, quantity, and country of origin. In principle, the country of origin should be indicated in English. Feb. 2006 – ER3 –