Marketing Bulletin DATE: January 5, 2004 TO: Affected Customers FROM: Mark Stoner RE: Product Termination To all concerned parties, This bulletin is to notify all customers of the termination of the following Ecliptek series effective November 11th, 2003: Series EC51 ES51 EC53 Description 5V 14 Pin DIP TCXO, HCMOS 5V 14 Pin DIP TCXO, Sinewave 3.3V 14 Pin DIP TCXO, HCMOS Recommended Replacement EB51F3 ES51F3 EB52F3 In compliance with our End of Life (EOL) policy, this will serve as advanced notice of product termination. New orders will not be accepted after February 1st, 2004, with deliveries to conclude by July 1st 2004. If there are any questions pertaining to this bulletin, please fell free to contact me. Thank you for your cooperation. Best Regards, Mark W. Stoner Director of Marketing Ecliptek Corporation 3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234 STANDARD SPECIFICATIONS Frequency Range: Frequency Stability: vs. Input Voltage (±5%) vs. Load (±2kΩ//±2pF) vs. Aging (at 25°C) Operating/Storage Temp. Range Supply Voltage Input Current Output Voltage Load Drive Capabillity Internal Trim (Top of Can) Pin 1 Control Voltage Blank V Frequency Deviation Typical Phase Noise 9.600MHz to 35.000MHz See Table 1 for Maximum Values (Inclusive of Operating Temperature Range) ±0.3ppm Maximum ±0.3ppm Maximum ±1ppm/year Maximum See Table 1 for Operating Temperature Range / Storage -40ºC to +85ºC 5.0Vdc ±5% 1.5mA Max. ≤ 20.000MHz, 2.0mA Max. 20.001MHz to 29.999MHz, 3.0mA Max. ≥ 30.000MHz 1.0Vp-p Minimum 10kOhms // 10pF ±3ppm Minimum OBSOLETE No Connect (Pin 1 not present) 2.5Vdc ±2.0Vdc, Positive Transfer Charateristic ±5ppm Minimum over Control Voltage -85dBc/Hz at 10Hz Offset, -115dBc/Hz at 100Hz Offset, -135dBc/Hz at 1kHz Offset, -140dBc/Hz at 10kHz Offset, -145dBc/Hz at 100kHz Offset, -150dBc/Hz at 1MHz Offset ENVIRONMENTAL & MECHANICAL Fine Leak Test: Gross Leak Test: Mechanical Shock: Vibration: Lead Integrity: MIL-STD-883, Method MIL-STD-883, Method MIL-STD-202, Method MIL-STD-883, Method MIL-STD-883, Method Solderability: Temperature Cycling: Resistance to Soldering Heat: Resistance to Solvents: 1014, Condition A 1014, Condition C 213, Condition C 2007, Condition A 2004 MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-202, Method 210 MIL-STD-202, Method 215 TABLE 1: PART NUMBERING CODES OPERATING TEMPERATURE FREQUENCY STABILITY X Denotes availability from 9.600MHz to 25.000MHz Y Denotes availability for any valid frequency. Range Code 0°C to +50°C -10°C to +60°C -20°C to +70°C -30°C to +60°C -30°C to +75°C -35°C to +80°C -40°C to +85°C A B C D E F G Code 50 35 30 25 20 15 ±1.5ppm ±2.0ppm ±2.5ppm ±3.0ppm ±3.5ppm ±5.0ppm Range Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y X Y Y Y Y X Y Y Y Y X X Y Y X X Y X X MARKING GUIDE (Line #1) ECLIPTEK (Line #2) ES51 00 X Y Pin 1 Connection Blank = No Connect (pin 1 not present) V = Control Voltage 2.5Vdc ±2.0Vdc Positive Transfer Characteristic Operating Temperature Code Per Table 1 Frequency Stability Code Per Table 1 PART NUMBERING GUIDE ES51 25 E V - 12.800M (Line #3) XX.XXXM Frequency Pin 1 Connection Blank = No Connect (pin 1 not present) V = Voltage Control (Line #4) XX Y ZZ Operating Temperature Range Code Per Table 1 Week of Year Last Digit of Year Ecliptek Manufacturing Code Frequency Stability Code Per Table 1 ∅3.5 ±0.5 4.5 ±0.3 ECLIPTEK ES5100XY XX.XXXM XXYZZ Frequency 5.0 ±1.0 NOTE: Marking shall conform to conditions listed in TQC41-001-000. 4.0 ±0.3 11.7 ±0.5 1.2 +0/-0.5 SPECIFICATION CONTROL DRAWING Ø0.50 ±0.05 18.3 ±0.5 Control Voltage (1) 4.0 ±0.3 Drawing Number Ground (2) CSC06-020-000 2.5 ±0.3 Title 4.5mm HEIGHT THRU-HOLE SINEWAVE TCXO 7.62 ±0.30 Output (3) Supply Voltage (4) 15.24 ±0.40 Revision NOTE: Pin 1 is not present when Control Voltage is specified as a "No Connect" ALL DIMENSIONS IN MILLIMETERS Effectivity Date E 05-02-03 ECN Number 8396 Approved By PAGE 1 OF 2 Date Released By Date STANDARD SPECIFICATIONS 9.600MHz to 35.000MHz See Table 1 for Maximum Values (Inclusive of Operating Temperature Range) ±0.3ppm Maximum ±0.3ppm Maximum ±1ppm/year Maximum See Table 1 for Operating Temperature Range / Storage -40ºC to +85ºC 5.0Vdc ±5% 30mA Maximum 2.4Vdc Min. w/TTL Load, VDD-0.5Vdc Min. w/HCMOS Load 0.4Vdc Max. w/TTL Load, 0.5Vdc Max. w/HCMOS Load 10nSec (0.4Vdc to 2.4Vdc w/TTL Load, 20% to 80% of waveform w/HCMOS Load) 50% ±10% (@1.4Vdc w/TTL Load, @50% of waveform w/HCMOS Load) 10TTL Load or 15pF HCMOS Load Maximum ±3ppm Minimum Frequency Range: Frequency Stability: vs. Input Voltage (±5%) vs. Load (±2pF) vs. Aging (at 25°C) Operating/Storage Temp. Range Supply Voltage Input Current Output Voltage Logic High Output Voltage Logic Low Rise/Fall Time Duty Cycle Load Drive Capabillity Internal Trim (Top of Can) Pin 1 Control Voltage Blank V Frequency Deviation Typical Phase Noise OBSOLETE No Connect (Pin 1 not present) 2.5Vdc ±2.0Vdc, Positive Transfer Charateristic ±5ppm Minimum over Control Voltage -85dBc/Hz at 10Hz Offset, -115dBc/Hz at 100Hz Offset, -135dBc/Hz at 1kHz Offset, -140dBc/Hz at 10kHz Offset, -145dBc/Hz at 100kHz Offset, -150dBc/Hz at 1MHz Offset ENVIRONMENTAL & MECHANICAL Fine Leak Test: Gross Leak Test: Mechanical Shock: Vibration: Lead Integrity: MIL-STD-883, Method MIL-STD-883, Method MIL-STD-202, Method MIL-STD-883, Method MIL-STD-883, Method 1014, Condition A 1014, Condition C 213, Condition C 2007, Condition A 2004 Solderability: Temperature Cycling: Resistance to Soldering Heat: Resistance to Solvents: MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-202, Method 210 MIL-STD-202, Method 215 TABLE 1: PART NUMBERING CODES OPERATING TEMPERATURE FREQUENCY STABILITY X Denotes availability from 9.600MHz to 25.000MHz Y Denotes availability for any valid frequency. Range Code 0°C to +50°C -10°C to +60°C -20°C to +70°C -30°C to +60°C -30°C to +75°C -35°C to +80°C -40°C to +85°C A B C D E F G 50 35 30 25 20 15 Code ±1.5ppm ±2.0ppm ±2.5ppm ±3.0ppm ±3.5ppm ±5.0ppm Range Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y X Y Y Y Y X Y Y Y X X Y Y X X Y X X MARKING GUIDE (Line #1) ECLIPTEK (Line #2) EC51 00 X Y Pin 1 Connection Blank = No Connect (pin 1 not present) V = Control Voltage 2.5Vdc ±2.0Vdc Positive Transfer Characteristic Operating Temperature Code Per Table 1 Frequency Stability Code Per Table 1 PART NUMBERING GUIDE EC51 25 E V - 12.800M Frequency Frequency Pin 1 Connection Blank = No Connect (pin 1 not present) V = Voltage Control (Line #4) XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Code Operating Temperature Range Code Per Table 1 Frequency Stability Code Per Table 1 ∅3.5 ±0.5 ECLIPTEK EC5100XY XX.XXXM XXYZZ (Line #3) XX.XXXM 4.5 ±0.3 5.0 ±1.0 NOTE: Marking shall conform to conditions listed in TQC41-001-000. 4.0 ±0.3 11.7 ±0.5 1.2 +0/-0.5 SPECIFICATION CONTROL DRAWING Ø0.50 ±0.05 Drawing Number CSC06-010-000 18.3 ±0.5 Control Voltage (1) 4.0 ±0.3 Ground (2) Title 2.5 ±0.3 4.5mm HEIGHT THRU-HOLE HCMOS/TTL TCXO Revision 7.62 ±0.30 Output (3) Supply Voltage (4) 15.24 ±0.40 Effectivity Date NOTE: Pin 1 is not present when Control Voltage is specified as a "No Connect" ECN Number ALL DIMENSIONS IN MILLIMETERS E 05-02-03 8395 PAGE 1 OF 2 Approved By Date Released By Date STANDARD SPECIFICATIONS 9.600MHz to 35.000MHz See Table 1 for Maximum Values (Inclusive of Operating Temperature Range) ±0.3ppm Maximum ±0.3ppm Maximum ±1ppm/year Maximum See Table 1 for Operating Temperature Range / Storage -40ºC to +85ºC 3.3Vdc ±5% 10mA Maximum < 20.000MHz, 20mA Maximum > 20.000MHz 2.7Vdc Minimum 0.5Vdc Maximum 10nSec. Maximum (20% to 80% of waveform) 50% ±10% (@50% of waveform) 15pF HCMOS Load Maximum ±3ppm Minimum Frequency Range: Frequency Stability: vs. Input Voltage (±5%) vs. Load (±2pF) vs. Aging (at 25°C) Operating/Storage Temp. Range Supply Voltage Input Current Output Voltage Logic High Output Voltage Logic Low Rise/Fall Time Duty Cycle Load Drive Capabillity Internal Trim (Top of Can) Pin 1 Control Voltage Blank V Frequency Deviation Typical Phase Noise OBSOLETE No Connect (Pin 1 not present) 1.65Vdc ±1.35Vdc, Positive Transfer Charateristic ±5ppm Minimum over Control Voltage -85dBc/Hz at 10Hz Offset, -115dBc/Hz at 100Hz Offset, -135dBc/Hz at 1kHz Offset, -140dBc/Hz at 10kHz Offset, -145dBc/Hz at 100kHz Offset, -150dBc/Hz at 1MHz Offset ENVIRONMENTAL & MECHANICAL Fine Leak Test: Gross Leak Test: Mechanical Shock: Vibration: Lead Integrity: MIL-STD-883, Method MIL-STD-883, Method MIL-STD-202, Method MIL-STD-883, Method MIL-STD-883, Method 1014, Condition A 1014, Condition C 213, Condition C 2007, Condition A 2004 Solderability: Temperature Cycling: Resistance to Soldering Heat: Resistance to Solvents: TABLE 1: PART NUMBERING CODES OPERATING TEMPERATURE MARKING GUIDE FREQUENCY STABILITY X Denotes availability from 9.600MHz to 25.000MHz Y Denotes availability for any valid frequency. Range Code 0°C to +50°C -10°C to +60°C -20°C to +70°C -30°C to +60°C -30°C to +75°C -35°C to +80°C -40°C to +85°C A B C D E F G 50 35 30 25 20 15 Code ±1.5ppm ±2.0ppm ±2.5ppm ±3.0ppm ±3.5ppm ±5.0ppm Range Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y X Y Y Y Y X Y Y Y X X Y Y X X Y X X (Line #1) ECLIPTEK (Line #2) EC53 00 X Y Pin 1 Connection Blank = No Connect (pin 1 not present) V = Control Voltage 1.65Vdc ±1.35Vdc Positive Transfer Characteristic Operating Temperature Code Per Table 1 Frequency Stability Code Per Table 1 PART NUMBERING GUIDE (Line #3) XX.XXXM EC53 25 E V - 12.800M Frequency Frequency Pin 1 Connection Blank = No Connect (pin 1 not present) V = Voltage Control ECLIPTEK EC5300XY XX.XXXM XXYZZ (Line #4) XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Code (Per TEN02-001-000) Operating Temperature Range Code Per Table 1 Frequency Stability Code Per Table 1 ∅3.5 ±0.5 MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-202, Method 210 MIL-STD-202, Method 215 4.5 ±0.3 5.0 ±1.0 NOTE: Marking shall conform to conditions listed in TQC41-001-000. 4.0 ±0.3 11.7 ±0.5 1.2 +0/-0.5 SPECIFICATION CONTROL DRAWING Ø0.50 ±0.05 Drawing Number 18.3 ±0.5 Control Voltage (1) 4.0 ±0.3 CSC06-110-000 Ground (2) 7.62 ±0.30 Output (3) Supply Voltage (4) 15.24 ±0.40 CLASS/SUBCLASS: OS62 2.5 ±0.3 Title 4.5mm THRU-HOLE 3.3Vdc HCMOS/TTL TCXO NOTE: Pin 1 is not present Revision when Control Voltage is specified as a "No Connect" ECN Number ALL DIMENSIONS IN MILLIMETERS Effectivity Date C 8400 Approved By 05-02-03 PAGE 1 OF 2 Date Released By Date