Marketing Bulletin DATE: Thursday, November 01, 2001 TO: Affected Customers FROM: Marketing RE: EV32C1 Series Termination To all concerned parties, This bulletin is to notify all customers of the discontinuation of the EV32C1 series Ecliptek oscillator effective Thursday, November 01, 2001. In compliance with our End of Life (EOL) policy, this notice will serve as advanced notice of product termination. New orders will not be accepted after Friday, February 01, 2002, with delivery to be conclude by Tuesday, April 30, 2002. The EV32C3 OR EV32C6 series is a recommended alternate for the EV32C1 series. This may not be an exact cross, so it is highly recommended that the data sheet(s) of the recommended alternate are reviewed and samples tested to ensure conformance. If there are any questions pertaining to this bulletin, please contact your Ecliptek sales representative. Thank you again for your cooperation. Ecliptek Marketing 3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234 STANDARD SPECIFICATIONS Code A B D E F H J Frequency Range (FO) Frequency Tolerance & Stability / Operating Temperature Range (OTR) (All Values Inclusive of OTR, Vdd, and CLOAD, with VC = 1.65VDC) Storage Temperature Range (STR) Supply Voltage (V DD) / Input Current (I DD) Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Rise/Fall Time (TR/TF) Duty Cycle (SYM) 1 2 Load Drive Capability (CLOAD) Start Up Time (TS) / Aging (@ 25°C) Typical Phase Noise (at offsets 10Hz to 1MHz) Period Jitter: RMS (TJRMS) Absolute Pull Range (APR) [All Values Inclusive of OTR, Vdd, CLOAD, and Aging over Control Voltage Range (VC)] 1 2 3 4 5 A B C Linearity Control Voltage Range (V C) / Test Conditions forAPR Control Voltage Range (V CR) / Transfer Function Input Impedance (Z I) Modulation Bandwidth (MBW) 16.384MHz to 44.736MHz (See TEN08-563-800 for a list of standard frequencies) Not Specified over 0°C to +70°C Not Specified over -40°C to +85°C ±50ppm Max. over 0°C to +70°C ±25ppm Max. over 0°C to +70°C ±20ppm Max. over 0°C to +70°C ±50ppm Max. over -40°C to +85°C ±25ppm Max. over -40°C to +85°C -55°C to +125°C 3.3VDC ±10% / 15mA Maximum 90% of VDD Minimum 10% of VDD Maximum 5nSec Maximum (20% to 80% of waveform) 50% ±10% (@ 50% of waveform) 50% ±5% (@ 50% of waveform) 15pF HCMOS Load Maximum 10 mSec Maximum / ±2ppm/1st year Typical, ±10ppm/10 years Maximum -70dBc/Hz, -100dBc/Hz, -130dBc/Hz, -147dBc/Hz, -152dBc/Hz, and -155dBc/Hz Not Specified ±20ppm Minimum ±32ppm Minimum ±50ppm Minimum ±80ppm Minimum ±100ppm Minimum ±20% Maximum ±15% Maximum ±10% Maximum 1.65VDC ±1.35VDC (0.3VDC to 3.0VDC ) 0.0VDC to VDD / Positive Transfer Characteristic 50kOhms Typical 10kHz Minimum (-3dB, VC = 1.65VDC) ENVIRONMENTAL & MECHANICAL Shock: Vibration: Seal Integrity: Solderability: Marking Permenancy: Conditions Conditions Conditions Conditions Conditions and Criteria and Criteria and Criteria and Criteria and Criteria Listed in TQC41-883-007 Listed in TQC41-883-008 Listed in TQC41-883-003 Listed in TQC41-883-004 / 95% coverage Listed in TQC41-883-001 PART NUMBERING GUIDE 7.00 ±0.15 EV32C1 D 2 A 1 - 35.328M TR 5.08 ±0.15 Packaging Options Blank = Tubes (CPA74-004-000) Frequency TR = Tape & Reel Duty Cycle 3 4 2.60 5.00 (CPA70-161-000) 1 = 50 ±10% ±0.15 ±0.15 2 = 50 ±5% 2 1 Linearity A = 20% Maximum, B = 15% Maximum, C = 10% Maximum 1.4 1.2 Absolute Pull Range (APR) ±0.1 3.68 ±0.2 1 = ±20ppm Minimum, 2 = ±32ppm Minimum ±0.15 3 = ±50ppm Minimum, 4 = ±80ppm Minimum 5 = ±100ppm Minimum Frequency Tolerance & Stability / OTR PIN CONNECTION A = Not Specified over 0°C to +70°C 1 Control Voltage (VC ) 1.60 ±0.20 B = Not Specified over -40°C to +85°C 2 Ground/Case Ground D = ±50ppm Max. over 0°C to +70°C 3 Output E = ±25ppm Max. over 0°C to +70°C 4 Supply Voltage All Dimensions In Millimeters F = ±20ppm Max. over 0°C to +70°C H = ±50ppm Max. over -40°C to +85°C SPECIFICATION CONTROL DRAWING J = ±25ppm Max. over -40°C to +85°C Drawing Number MARKING GUIDE (Line #1) ECLIPTEK (Line #2) XX.XXXM Frequency (Line #3) XX Y ZZ CSC12-560-000 Title ECLIPTEK XX.XXXM XXYZZ Week of Year Last Digit of Year Ecliptek Manufacturing Code (Per TEN02-001-000) NOTE: Pin 1 shall be marked with a dot. Marking shall conform to conditions listed in TQC41-001-000. CERAMIC SMD 3.3V HCMOS/TTL VCXO Revision Effectivity Date B ECN Number 5632 Approved By PAGE 1 OF 2 Date Released By Date