7.5 AMP POSITIVE VOLTAGE REGULATOR June 7, 1999 EZ1083 EZ1083B TEL:805-498-2111 FAX:805-498-3804 WEB:http://www.semtech.com DESCRIPTION The EZ1083 series of high performance positive voltage regulators are designed for use in applications requiring low dropout performance at full rated current. Additionally, the EZ1083 series provides excellent regulation over variations in line, load and temperature. Outstanding features include low dropout performance at rated current, fast transient response, internal current limiting and thermal shutdown protection of the output device. The EZ1083 has both fixed and adjustable voltage options, while the EZ1083B is adjustable only for cost sensitive applications. These devices are available in the popular TO-220 package. FEATURES • Low dropout performance, • • • • • • • • 1.3V max. for EZ1083, 1.45V max. for EZ1083B Full current rating over line and temperature Fast transient response ±2% total output regulation over line, load and temperature (±2.4% for EZ1083B) Adjust pin current max 90µA over temperature Fixed/adjustable output voltage (EZ1083) Line regulation typically 0.015% Load regulation typically 0.05% TO-220 package ORDERING INFORMATION DEVICE APPLICATIONS • High current microprocessor supplies • Post regulators BLOCK DIAGRAM EZ1083CT-X.X EZ1083BCT PACKAGE VOUT VOLTS TO-220 See Note (1) 1.30 to 5.7 Note: (1) Where X.X denotes voltage options. Available voltages are: 1.5V, 2.5V and 3.3V. Leave blank for adjustable version (1.3 to 5.7V). Contact factory for additional voltage options. ABSOLUTE MAXIMUM RATINGS Parameter Input Supply Voltage VIN 7 V PD Internally Limited W Thermal Resistance Junction to Case θJC 2 °C/W Thermal Resistance Junction to Ambient θJA 50 °C/W Operating Junction Temperature Range TJ 0 to 125 °C Storage Temperature Range TSTG -65 to 150 °C Lead Temperature (Soldering) 10 Sec. TLEAD 260 °C Power Dissipation PIN CONFIGURATIONS Symbol Maximum Units 1 © 1999 SEMTECH CORP. 652 MITCHELL ROAD NEWBURY PARK CA 91320 7.5 AMP POSITIVE VOLTAGE REGULATOR EZ1083 EZ1083B June 7, 1999 ELECTRICAL CHARACTERISTICS Unless otherwise specified, Adj VIN = 2.75V to 7.0V and Adj IO = 10mA to 7.5A; Fixed VIN = 4.75 to 7.0V and Fixed IO = 0 mA to 7.5A Test Conditions Parameter (1) Output Voltage Symbol VIN IO VO 5V 0mA TJ EZ1083-X.X Reference Voltage (1) VREF 5V 10mA EZ1083 Reference Voltage (1) VREF 5V 10mA EZ1083B (1) Line Regulation REG(LINE) (1) REG(LOAD) Load Regulation (2) 10mA 5V VD Dropout Voltage Test Limits EZ1083, EZ1083-X.X (5) Min Typ Max Units 25°C 0.99lVOl VO 1.01lVOl V O.T. 0.98lVOl VO 1.02lVOl 25°C 1.238 1.250 1.262 O.T. 1.225 1.250 1.275 25°C 1.233 1.250 1.267 O.T. 1.220 1.250 1.280 25°C 0.015 0.2 O.T. 0.035 0.2 25°C 0.05 0.3 O.T. 0.2 0.4 25°C 1 O.T. 1.10 1.30 1.20 1.45 EZ1083B Current Limit ICL Quiescent Current Fixed Voltage Version IQ Temperature Coefficient Adjust Pin Current O.T. 5V 7.5 O.T. 0.005 %/°C IADJ 25°C 55 µA 5V Minimum Load Current Adj Voltage Version IO 5V 0.5A VN Ripple Rejection Ratio A TC TS (4) % 12 ∆IADJ (3) % O.T. Temperature Stability RMS Output Noise V V 9.5 O.T. Adjust Pin Current Change V RA 5V 7.5A 14 mA 90 O.T. 0.2 O.T. 0.5 O.T. 5 25°C 0.003 %VO 72 dB O.T. 60 5 µA % 10 mA NOTES: (1) Low duty cycle pulse testing with Kelvin connections required. (2) ∆VOUT, ∆VREF = 1%. (3) Bandwidth of 10 Hz to 10 kHz. (4) 120 Hz input ripple (CADJ for ADJ = 25µF). (5) Over Temp. (O.T.) = over specified operating junction temperature range. 2 © 1999 SEMTECH CORP. 652 MITCHELL ROAD NEWBURY PARK CA 91320 7.5 AMP POSITIVE VOLTAGE REGULATOR EZ1083 EZ1083B June 7, 1999 TYPICAL APPLICATIONS FIXED VOLTAGE REGULATOR (1)(2) ADJUSTABLE VOLTAGE REGULATOR (1)(2) EZ1083/EZ1083B 3 © 1999 SEMTECH CORP. 652 MITCHELL ROAD NEWBURY PARK CA 91320 7.5 AMP POSITIVE VOLTAGE REGULATOR EZ1083 EZ1083B June 7, 1999 OUTLINE - TO-220 4 © 1999 SEMTECH CORP. 652 MITCHELL ROAD NEWBURY PARK CA 91320