EZ55Z3L 0.25 Amp Positive Voltage Regulators POWER MANAGEMENT Description Features u u u u u u u The EZ55Z3L voltage regulators are monolithic integrated circuits designed for use in applications requiring a well regulated positive output voltage with low input-tooutput differential voltage requirements. Outstanding features include full power usage up to 250mA of load current, internal current limiting and thermal shutdown. Safe area protection on the die is also included, providing protection of the series pass transistor under most operating conditions. TO-92 and SOT-223 packages are available for cost effective applications. External capacitor not required for stability Low dropout performance Five fixed voltage options: 3.3V, 5V, 9V, 12V, 24V Adjustable output down to 1.25V Line regulation typically 0.015% Load regulation typically 0.1% TO-92 and SOT-223 packages Typical Application Circuits Fixed Voltage Regulator Adjustable Voltage Regulator R1 VOUT = 1.250 • 1 + R 2 Revision 10/2000 1 www.semtech.com EZ55Z3L POWER MANAGEMENT Absolute Maximum Ratings Parameter Sy mbol Maximum U nits Operati ng Input Voltage VIN VOUT + 10 V Power D i ssi pati on(1) PD 2.5 W Thermal Resi stance Juncti on to Ambi ent SOT-223 TO-92 q JA 62.3 132 °C /W Thermal Resi stance Juncti on to C ase SOT-223 TO-92 q JC 15 66 °C /W Operati ng Juncti on Temperature Range TJ 0 to 125 °C Storage Temperature Range TSTG -65 to 150 °C Lead Temperature (Solderi ng) 10 Sec. TLEAD 300 °C ESD Rati ng (Human Body Model) V ESD 2 kV Note: (1) Specifications are applicable for a power dissipation of 2.5W and are only achievable over a limited range of VIN - VOUT. Electrical Characteristics Unless otherwise specified: (VIN - VOUT) = 1.45V to 10V and IOUT = 10mA to 250mA. Values in bold apply over the full operating temperature range. Parameter Output Voltage(2) Sy mbol C onditions(1) Min Ty p Max U nits VOUT VIN = VOUT + 3V, IOUT = 10mA -3% VOUT +3% V -4% Fi xed Voltage Versi on Reference Voltage(2) VREF VIN = VOUT + 3V, IOUT = 10mA 1.213 +4% 1.250 1.200 Adj. Voltage Versi on 0.2 0.035 0.2 0.1 0.3 0.2 0.4 VD 1.3 1.5 Surge C urrent Li mi t IS 0.5 Qui escent C urrent IQ Load Regulati on(2) D ropout Voltage REG(LOAD) IOUT = 10mA VIN = 3V V 1.300 0.015 Li ne Regulati on(2) REG(LINE) 1.288 % % V DVOUT, DVREF = 1% Thermal Regulati on(3) ã 2001 Semtech Corp. VIN = 10V REG(THERM) 2 A 10 15 mA 0.002 0.01 %/W www.semtech.com EZ55Z3L POWER MANAGEMENT Electrical Characteristics (Cont.) Unless otherwise specified: (VIN - VOUT) = 1.45V to 10V and IOUT = 10mA to 250mA. Values in bold apply over the full operating temperature range. Parameter Adjust Pi n C urrent Sy mbol C onditions(1) Min Ty p Max 55 IADJ U nits µA 120 Adjust Pi n C urrent C hange 0.2 DIADJ Temperature Stabi li ty TS VIN = 5V, IOUT = 250mA 0.5 Mi ni mum Load C urrent IOUT VIN = 10V 5 RMS Output Noi se(4) VN Ri pple Rejecti on Rati o(5) RA VIN = 5V, IOUT = 250mA 60 5 µA % 10 mA 0.003 %VOUT 72 dB Notes: (1) Specifications are applicable for a power dissipation of 2.5W and are only achievable over a limited range of VIN - VOUT. (2) Low duty cycle pulse testing with Kelvin connections required. Changes in output voltage due to heating effects are covered under the specification for thermal regulation. (3) 30ms pulse. (4) Bandwidth of 10Hz to 10kHz (5) 120Hz input ripple, 1 dB less for each volt increase above 3.3V Min.; COUT & CADJ (for ADJ) = 25µF. ã 2001 Semtech Corp. 3 www.semtech.com EZ55Z3L POWER MANAGEMENT Pin Configurations Ordering Information D ev ice(1) P ackag e PIN FU N C TION EZ55Z3L-SX.TR(2) SOT-223 1 AD J/GND EZ55Z3L-ZX.TR(3) TO-92 2 OUT 3 IN Notes: (1) Where X denotes voltage options. Available voltages are: 3.3V, 5V, 9V, 12V and 24V. Replace X with ADJ for adjustable version (1.25 to 24V). (2) Only available in tape and reel packaging. A reel contains 2500 devices. (3) Available in tape and reel packaging (a reel contains 3000 devices) or ammo pack (suffix TA, an ammo pack contains 2000 devices). SOT-223 Tab i s OUT Block Diagram ã 2001 Semtech Corp. 4 www.semtech.com EZ55Z3L POWER MANAGEMENT Outline Drawing - SOT-223 Land Pattern - SOT-223 ã 2001 Semtech Corp. 5 www.semtech.com EZ55Z3L POWER MANAGEMENT Outline Drawing - TO-92 Contact Information Semtech Corporation Power Management Products Division 652 Mitchell Rd., Newbury Park, CA 91320 Phone: (805)498-2111 FAX (805)498-3804 ã 2001 Semtech Corp. 6 www.semtech.com