SAW Bandpass Filter F1G95 Features z US-PCS applications z Usable bandwidth of 30 MHz z No impedance matching require for operation at 50 Ω z SMD Package 2.0 mm × 1.6 mm× 0.7 mm z Single-ended Operation z RoHS Compliant Package Dimensions 4 3 3 1 2 2 4 1 Pin Configurations 1 Input 2 Case Ground 3 Output 4 Case Ground Maximum Ratings Parameters Unit Minimum Typical Maximum Operating Temperature Range ℃ -30 25 85 Storage Temperature Range ℃ -30 - 85 Power Handling Capability dBm - - 13 Electrostatics Sensitive Device (ESD) I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F1G95 Rev. Date 2007-08-30 Rev. NC7006-AS01 1/7 SAW Bandpass Filter F1G95 Specifications Minimum Typical Maximum Unit Center Frequency ( Fc ) - 1960 - MHz Insertion Loss (Fo +/- 30 MHz) - 2.3 2.7 dB Amplitude Ripple (Fo +/- 30 MHz) - 0.6 1.7 dBp-p VSWR (Fo +/- 30 MHz) - 2.0 2.4 Relative Attenuation D.C. ~ 1850 MHz 26.0 34.0 - 1850 ~ 1910 MHz 15.0 21.0 - 2010 ~ 2070 MHz 15.0 21.0 - 3860 ~ 3980 MHz 28.0 37.0 - 5790 ~ 5970 MHz 33.0 33.0 - -30 25 85 ℃ 13 dBm Temperature Range (Operational) Input RF Power (Fo +/- 30 MHz) Input/Output Impedance dB 50 Ohms Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 3) All attenuation measurements are measured relative to insertion loss I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F1G95 Rev. Date 2007-08-30 Rev. NC7006-AS01 2/7 SAW Bandpass Filter F1G95 Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) Input 50Ω Output 50Ω Marking Configuration 1) AN 2) A1 3) 1) Index Mark 2) Part Number Mark ( ITF Standard Rule ) 3) Lot Number ( ITF Standard Rule ) * Ink or Laser Marking available * Marking configuration depends on ITF standard rules. I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F1G95 Rev. Date 2007-08-30 Rev. NC7006-AS01 3/7 SAW Bandpass Filter F1G95 Typical Performance ( at 25℃ ) CH1 S21 LOG 30 Aug 2007 11:56:43 5:-27 . 360 dB 2 010. 000 000 MHz 5 dB/ REF 0 dB 1 2 CH1Markers 1:-2 . 2677 dB 1. 93000 GHz Cor 2:-2 . 5564 dB 1. 99000 GHz 3:-40 . 858 dB 1. 85000 GHz 4:-25 . 178 dB 5 1. 91000 GHz 4 3 CENTER1 960. 000 000 MHz CH1 S21 LOG 5 dB/ REF 0 dB SPAN 300. 000 000 MHz 30 Aug 2007 11:48:26 1:-40 . 189 dB 1 850. 000 000 MHz CH1Markers 2:-31 . 957 dB 2. 07000 GHz Cor 2 1 START . 010 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 STOP3 000. 000 000 MHz Part No. F1G95 Rev. Date 2007-08-30 Rev. NC7006-AS01 4/7 SAW Bandpass Filter F1G95 Input / Output VSWR Charts CH1 S11 SWR 1 / 30 Aug 2007 11:58:57 1: 1. 3673 1 930. 000 000 MHz REF 1 CH1 S11 5: 4. 0137 1 U FS -12 . 971 30 Aug 2007 11:58:05 6. 1046 pF 2 010. 000 000 MHz CH1 Markers CH1 Markers 2: 2. 1118 1. 99000 GHz Cor 1: 38. 947 8. 3613 1. 93000 GHz 4 Cor 3 2: 24. 232 -6 . 7568 1. 99000 GHz 3: 2. 2158 21. 878 1. 85000 GHz 4: 11. 420 1 43. 283 1. 91000 GHz 2 5 1 2 CENTER1 960. 000 000 MHz SPAN 300. 000 000 MHz CENTER1 960. 000 000 MHz SPAN 300. 000 000 MHz Input / Output Smith Charts CH1 S22 SWR 1 / 30 Aug 2007 11:59:08 1: 1. 2018 1 930. 000 000 MHz REF 1 CH1 S22 5: 5. 1895 1 U FS -23 . 845 CH1 Markers CH1 Markers 2: 2. 0817 1. 99000 GHz Cor 30 Aug 2007 11:58:20 3. 3207 pF 2 010. 000 000 MHz 4 Cor 1: 53. 461 8. 8262 1. 93000 GHz 3 2: 32. 230 -24 . 344 1. 99000 GHz 3: 2. 4717 21. 015 1. 85000 GHz 4: 12. 385 1 62. 684 1. 91000 GHz 2 5 1 CENTER1 960. 000 000 MHz 2 SPAN 300. 000 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 CENTER1 960. 000 000 MHz SPAN 300. 000 000 MHz Part No. F1G95 Rev. Date 2007-08-30 Rev. NC7006-AS01 5/7 SAW Bandpass Filter F1G95 Packing Specification 1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel ) 2. Taping Structure : The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE REEL CARRIER TAPE Tape Specification 1. Leader part and vacant position specification Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min. END START Tape Running Direction 2. Tensile strength of carrier tape 4.4N/mm width Direction of pull Top cover tape 3. Top cover tape adhesion 0~15 degree 1) pull off angle : 0~15° 2) speed : 300mm/min 3) force : 20~70g I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Carrier tape Part No. F1G95 Rev. Date 2007-08-30 Rev. NC7006-AS01 6/7 SAW Bandpass Filter F1G95 Carrier Tape Dimensions [unit : mm] Top Cover Tape Part Direction Tape Running Direction Reel Dimensions [unit : mm] I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F1G95 Rev. Date 2007-08-30 Rev. NC7006-AS01 7/7