NEW MCP ASSEMBLY F9890-11/-12, F9892-11/-12 HIGH TIME RESOLUTION TOF-MS DETECTOR HIGH VOLTAGE FLOATING OPERATION FEATURES ●High voltage floating operation MCP-IN ± 10 kV ●Fast time response ●Large effective area F9890-11/-12 F9892-11/-12 27 mm 42 mm ●Excellent MCP flatness ●Robust MCP ●Less ringing ●Small time jitter OVERVIEW Figure 1: Typical Output Waveform (F9892-12) 20 0 OUTPUT VOLTAGE (mV) The F9890-11/-12 and F9892-11/-12 are ideal detectors with large effective area for TOF-MS (Time of Flight Mass Spectrometry). Our own advanced technology in optimizing the assembly design with flat MCP allows excellent time resolution of 1.2 ns (FWHM: F9892-11/-12) with negligible ringing at both ±10 kV high voltage floating operation. TMCPB0088EB -20 -40 -60 FWHM: 1.2 ns -80 -100 FLOATING OPERATION MCP-IN SUPPLY VOLTAGE 0 kV -10 kV +10 kV -120 RESPONSE TIME (1 ns/div.) SPECIFICATIONS GENERAL Parameter MCP Channel Diameter Bias Angle Effective Area Assembly Outer Size Assembly Height Size Number of MCPs F9890-11 12 F9890-12 6 F9892-11 12 F9892-12 6 12 27 81 42 92 54.1 53.7 54.1 53.7 2 Unit µm degree mm mm mm — TYPICAL ELECTRICAL CHARACTERISTICS (Supply Voltage: 2 kV, Vacuum: 1.3 × 10-4 Pa, Operating Ambient Temperature: +25 °C) F9890-11 Parameter Gain (Min.) Plate Resistance per MCP Dark Count (Max.) Pulse Width (FWHM) (TYP.) F9890-12 F9892-11 F9892-12 Unit — MΩ s-1 . cm-2 ns F9892-12 Unit kV kV kV Pa 1 × 106 10 to 40 8 to 32 3 0.9 1.2 RATINGS Parameter MCP Supply Voltage (Max.) MCP-OUT to Anode Supply Voltage (Max.) MCP-IN Supply Voltage (Max.) Operating Vacuum Condition (Max.) F9890-11 F9890-12 F9892-11 2.0 0.5 ±10 1.3 × 10-4 A NOTE: A Better vaccum than 1.3 × 10-4 Pa. DIMENSIONAL OUTLINES (Unit: mm) ASSEMBLY HEIGHT SIZE D 38.1 4- 4.5 45 ° MCP-IN LEAD EFFECTIVE AREA A B C ASSEMBLY OUTER SIZE 1.65 3 F G E MCP-OUT LEAD SIGNAL BNC* ANODE LEAD FRONT VIEW SIDE VIEW BACK VIEW * SMA connector type also available. CIRCUIT DIAGRAM Type No. F9890-11 F9890-12 F9892-11 F9892-12 A B C 27 63 81 42 75 92 D 16 15.6 16 15.6 E F G 35 72 52 40 84 64 ANODE MCP C SIGNAL R MCP-IN MCP-OUT ANODE LEAD LEAD LEAD TMCPA0072EA Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2007 Hamamatsu Photonics K.K. WEB SITE www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected] Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: [email protected] France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected] United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: [email protected] North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected] TMCP1033E01 Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: [email protected] MAY 2007 IP