F, F11, FMT, FMT11 Series 1.3mm /1.1mm Ceramic Surface Mount Crystals PART NUMBERING GUIDE C A L I B E R Lead-Free RoHS Compliant Electronics Inc. Environmental/Mechanical Specifications on page F5 FMT11 D 20 C 1 29.4912MHz Package F = 1.3mm max. ht. / Ceramic Glass Sealed Package F11 = 1.1mm max. ht. / Ceramic Glass Sealed Package FMT = 1.3mm max. ht. / Seam Weld “Metal Lid” Package FMT11 = 1.1mm max. ht./ Seam Weld “Metal Lid” Package Tolerance/Stability A=±50/100 G=±20/10 B=±50/50 H=±10/10 C=±30/50 J =±10/20 D=±20/30 E=±15/30 F=±10/50 Mode of Operation 1=Fundamental 3=Third Overtone 5=Fifth Overtone Operating Temperature Range C=0°C to 70°C E=-20°C to 70°C F=-40°C to 85°C Load Capacitance S=Series, XX=XXpF (Pico Farads) ELECTRICAL SPECIFICATIONS Revision: 1996-D Frequency Range 8.000MHz to 150.000MHz Frequency Tolerance/Stability A, B, C, D, E, F See above for details! Other Combinations Available. Contact Factory for Custom Specifications. Operating Temperature Range “C” Option, “E” Option, “F” Option 0°C to 70°C, -20°C to 70°C, -40°C to 85°C Aging @ 25°C ±3ppm / year Maximum Storage Temperature Range -55°C to 125°C Load Capacitance “S” Option “XX” Option Series 8pF to 50pF Shunt Capacitance 7pF Maximum Insulation Resistance 500 Megaohms Minimum at 100Vdc Drive Level 1mW Maximum, 100uW correlation EQUIVALENT SERIES RESISTANCE (ESR) Frequency (MHz) ESR (ohms) Frequency (MHz) ESR (ohms) 9.000 to 10.999 60 35.000 to 39.990 (3rd OT) 60 11.000 to 13.999 50 40.000 to 49.990 (3rd OT) 60 14.000 to 15.999 40 50.000 to 89.999 (3rd OT) 60 16.000 to 40.000 30 90.000 to 150.000 100 MECHANICAL DIMENSIONS Marking Guide Line 1: Line 2: CEI = YM = All Dimensions in mm. 2.54 ±0.20 Kovar Lid for “FMT Series” 5.00 ±0.20 4 7.00 +0.30 -0.20 4 1 3 2 “H Dimension” 1.00 ±0.20 (X4) Ceramic Base all TEL 949-366-8700 1 4.60 ±0.20 3 Frequency CEI YM Caliber Electronics Date Code (year/month) 2 Pad Connection 1 Crystal In/OUt 2 Ground 3 Crystal in/Out 4 Ground NOTE: Dimensions for Specific Packages H = 1.3 Maximum for “F Series” H = 1.3 Maximum for “FMT Series” / “Metal Lid” H = 1.1 Maximum for “F11 Series” H = 1.1 Maximum for “FMT11 Series” / “Metal Lid” FAX 949-366-8707 WEB http://www.caliberelectronics.com