Fujitsu FBR18WD04 Miniature relay (surface mount type) 2 poles-1 to 2 a (for signal switching) Datasheet

MINIATURE RELAY (SURFACE MOUNT TYPE)
2 POLES—1 to 2 A (FOR SIGNAL SWITCHING)
FBR18 SERIES
N
OT
■ FEATURES
●
●
●
●
●
●
FO
D
R
ES
FB
NE
IG
BE R1
W
N
8
S
ND
DI
SC
/H
ON D
T
EX
T
O
IN
C
EP
FB
IE
D
T
R1
8W
D
2 form C small size,surface mounting relay.
Super miniature size: 0.2 inch × 0.1 inch grid, 12 pin DIP
Up to 50% less volume and board area than previous
generation telecom relay.
UL, CSA recognized.
High dielectric and surge strength:
2.5 KV surge (per Bellcore TA-NWT-001089)
1.5 KV surge (per FCC part 68)
1,000 Vrms, open contacts
Low power consumption: 80 mW operate
140 mW nominal
Tape and reel packing for automatic mounting.
■ ORDERING INFORMATION
[Example]
FBR18 N
(a) (b)
D
(c)
12
(d)
■
(–CSA) –■
(h)
(i)
–P –M –**
(e) (f ) (g)
(a)
Series Name
FBR18 : FBR18 Series [2 pole double throw (2 form C)]
(b)
Enclosure
N
: Plastic sealed (washable type)
(c)
Coil Type
D
: DC coil
(d)
Nominal Voltage
Refer to the COIL DATA CHART
(e)
Contact Material
Nil
–P
: Gold-overlay silver-nickel
: Gold-overlay silver-palladium
(f)
Terminal
Nil
–M
: Standard
: High density mounting
(g)
Custom Designation
To be assigned custom specification
(h)
CSA Standard
–CSA: UL114 + CSA recognized
(i)
Packing
Nil
: Tape and reel (500 pieces/tape and reel)
Note: The designation name is stamped on the top of the relay case as follows:
(Example) designation ordered : FBR18ND05
Stamp : 18ND05
■ SAFETY STANDARD AND FILE NUMBERS
UL508, 1950, 114 (File No. E63615)
C22.2 No. 0, No. 14 (File No. LR40304 or LR64026)
Nominal voltage
3 to 24 VDC
Contact rating
2 A 30 VDC resistive
0.3 A 110 VDC resistive
0.5 A 125 VAC resistive
FBR18 SERIES
■ SPECIFICATIONS
Item
Contact
Standard (Gold-overlay silver-nickel)
Arrangement
2 form C (DPDT)
Material
Gold-overlay silver-nickel
Gold-overlay silver-palladium
NO
Style
-P type (Gold-overlay silver-palladium)
Bifurcated
Resistance (initial)
Maximum 100 mΩ (at 0.1 A 6 VDC)
Rating (resistive)
TF
0.5 A 125 VAC or 1 A 30 VDC
Maximum Carrying Current
2 A (at 20°C)
Maximum Switching Power
62.5 VA or 60 W
Max. Switching Voltage*1
250 VAC or 220 VDC
Maximum Switching Current
FB
Minimum Switching Load*2
DE
2A
OR
0.01 mA 10 mVDC (reference)
NE
GN
BE R1
W
8
S
ND
DI
SC
/H
ON D
T
EX
T
O
IN
C
EP
FB
IE
D
T
R1
8W
D
Coil
Time Value
Insulation
Approximately 1.0 pF (between open contacts, adjacent contacts )
Approximately 1.0 pF (between coil and contacts)
Nominal Power (at 20°C)
Approximately 0.14 W (0.2 W for 24 V coil)
Operate Power (at 20°C)
Maximum 0.08 W (0.112 W for 24 V coil)
Thermal Resistance at
Continuous Thermal Load
Approximately 115°C/W
Operating Temperature
–40°C to +85°C (no frost) (refer to the CHARACTERISTIC DATA)
Operating Humidity
45 to 85%RH
Operate (at nominal voltage)
Maximum 4 msec.
Release (at nominal voltage)
Maximum 4 msec.
Max. Switching Frequency
Mechanical 3 Hz or electrical 0.5 Hz (at contact rating)
Resistance (initial)
Minimum 1,000 MΩ (at 500 VDC)
Dielectric between open contacts
Strength
adjacent contacts
1,000 VAC
1 minimum
between coil and contacts
Surge
between open
Strength contacts,
adjacent contact
*2
700
2
10
2,500
1,250
2,500 V
(at 2 × 10 µs)
DC
2 × 105 operations minimum
5 × 105 operations minimum
AC
1 × 105 operations minimum
2 × 105 operations minimum
Vibration
Resistance
Misoperation
10 to 55 Hz (double amplitude of 1.5 mm)
Endurance
10 to 55 Hz (double amplitude of 3.0 mm)
Shock
Resistance
Misoperation
500 m/s2 (11±1 ms)
Endurance
1,000 m/s2 (11 ±1 ms)
Weight
*1
10
1 × 108 operations minimum
Mechanical
Electrical
(at contact rating)
Other
1,500
750
1,500 VAC 1 minimum
1,500 V
(at 10 × 700 µs)
between coil and contacts
Life
SI
Capacitance
(at 10 kHz)
Approximately 1.9 g
If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the
type of load.
Values when switching a resistive load at normal room temperature and humidity and in a clean atmosphere. The minimum switching load varies with the switching frequency and operation environment.
2
FBR18 SERIES
■ COIL DATA CHART
FBR-18 N type
MODEL
Nominal
Coil
current
resistance (at nominal
voltage)
(±10%)
approx.
Nominal
voltage
NO
Standard
-P type
FBR18ND03
FBR18ND03-P
3 VDC
64.3 Ω
FBR18ND04
FBR18ND04-P
4.5 VDC
145 Ω
FBR18ND05
FBR18ND05-P
5 VDC
178 Ω
FBR18ND06
FBR18ND06-P
6 VDC
257 Ω
FBR18ND09
FBR18ND09-P
9 VDC
579 Ω
FBR18ND12
FBR18ND12-P
12 VDC
FB
Must
operate1
voltage*
Must
release 1
voltage*
Nominal
power
Coil
temperature
rise
Approx.
0.08 W
Max.
Approx.
20 deg
(at nominal
voltage)
46 mA
TF
31 mA
28 mA
23 mA
DE
75% max. 10% min. Approx.
W
of nominal of nominal (at0.14
nominal
voltage
voltage
voltage)
15 mA
1,028 Ω
Operate
power
11 mA
OR
NE
GN
BE R1
W
8
S
ND
DI
SC
/H
ON D
T
EX
T
O
IN
C
EP
FB
IE
D
T
R1
8W
D
FBR18ND24
FBR18ND24-P
2,880 Ω
24 VDC
8 mA
SI
*1: Specified values are subject to pulse wave voltage.
Note: All values in the table are measured at 20°C.
FBR-18 W type
MODEL
Nominal
voltage
Coil
resistance
(±10%)
Standard
-P type
FBR18WD03
FBR18WD03-P
3 VDC
39 Ω
FBR18WD04
FBR18WD04-P
4.5 VDC
88 Ω
FBR18WD05
FBR18WD05-P
5 VDC
108 Ω
FBR18WD06
FBR18WD06-P
6 VDC
156 Ω
FBR18WD09
FBR18WD09-P
9 VDC
352 Ω
FBR18WD12
FBR18WD12-P
12 VDC
626 Ω
FBR18WD24
FBR18WD24-P
24 VDC
2,304 Ω
Must
operate1
voltage*
Must
release1
voltage*
0.2 W
0.112 W
Nominal
power
75% max. 10% min. Approx.
W
of nominal of nominal (at0.23
nominal
voltage
voltage
voltage)
0.25 W
30 deg
Operate
power
Coil
temperature
rise
Approx.
0.13 W
Max.
Approx.
30 deg
(at nominal
voltage)
0.14W
33 deg
*1: Specified values are subject to pulse wave voltage.
Note: All values in the table are measured at 20°C.
■ CHARACTERISTIC DATA
Maximum switching capacity
Range of operation temperature and voltage
Life curve
160
b
wa
allo
150
v
oil
le c
140
ge
olta
130
120
110
Operating voltage range
100
90
80
70
t op
erate
Mus
ge
volta
–10 0 10 20 30 40 50 60 70 80
Operating temperature (˚C)
Contact load current (A)
um
(DATA) assumes that
the maximum allowable temperature of
E type insulation
coil is 115˚C
➀ AC resistive load
( AC contact rating)
➁ DC resistive load
( DC contact rating)
2.0
➁
1.0
➀
0.5
0.3
0.2
0.1
10
20
30
50
125
200
Contact load voltage (V)
500
Service life (operations)
xim
Ma
Nominal voltage multiplying Ffactor (%)
(x104)
100
30 V DC resistive load
(–P)TYPE
50
125 V AC
resistive load
10
5
(–P)TYPE
1
0.5
1.0
1.5
2.0
Contact load current (A)
3
FBR18 SERIES
■ REFERENCE DATA
Distribution of operate and release voltage
Distribution of operate and release time
Operate
Release
80
Operate
Release
NO
50
80
40
30
20
60
TF
40
20
10
0
0
10
20
FB
30
40
50
60
0
70
80
60
Distribution (%)
Distribution (%)
Distribution (%)
Distribution of contact resistance
100
60
DE
0
1
2
3
4
40
OR
20
0
5
6
7
8
0
10
20
30
40
50
60
70
80
NE
GN
BE R1
W
8
S
ND
DI
SC
/H
ON D
T
EX
T
O
IN
C
EP
FB
IE
D
T
R1
8W
D
Rated coil voltage multiplying factor (%)
SI
Time (ms)
■ DIMENSIONS
●Dimensions
●Schematics
(TOP VIEW)
Standard (FBR18 type)
7.4+0.1
●PC board mounting pad layout
(TOP VIEW)
1
0.25
10 9
8
3 4
5
2.73
7.02
12
–
10.15+0.2
1.45
14.7+0.3
Contact resistance (mΩ)
+
1
5.08 2.54 2.54
5.08 2.54 2.54
5.08
8.9+0.1
(1.0)
High density mounting (FBR18-M type)
7.4+0.1
1
0.25
10 9
8
3 4
5
2.2
6.49
12
–
10.35+0.2
1.65
14.7+0.3
+
1
5.08 2.54 2.54
5.08 2.54 2.54
(1.0)
5.08
7.4+0.1
Unit: mm
4
FBR18 SERIES
■ RECOMMENDED SOLDERING CONDITIONS
(TEMPERATURE PROFILE)
soldering
T3
0
215°C maximum soldering
TF
preheating
30 sec
Max.
FB
120 sec maximum
NO
T 3 = 245°C max.
T 2 = 200°C max.
cooling T 1 = 165°C max.
T2
T1
VPS (Vapor Phase Soldering)
Temperature (°C)
Temperature (°C)
IRS (Infrared Reflow Soldering)
T3
cooling
T2
DE
T1
T 3 = 200°C maximum
T 2 = 165°C maximum
T 1 = 100°C maximum
preheating
0
OR
60 sec Max.
NE
GN
BE R1
W
8
S
ND
DI
SC
/H
ON D
T
EX
T
O
IN
C
EP
FB
IE
D
T
R1
8W
D
Note:
SI
60 sec Max.
90 sec Max.
1.Temperature profiles show the temperature of PC board surface.
2.Please perform soldering test with your actual PC board before
mass production, since the temperatures of PC board surfaces
vary according to the size of PC board, status of parts mounting
and heating method.
■ PACKING
• Packing orientation code: B
(1) Quantity of 1 reel : 500 pieces
Feeding
Orientation mark side
(2) Dimensions (in mm)
• REEL DIMENSIONS
• TAPE DIMENSIONS
Note:
Relays are sold in packs of 500 pieces, please order
500 pieces as 1 unit.
5
FBR18 SERIES
Fujitsu Components
International
Headquarter
Offices
FB
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: www.fceu.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: www.fcai.fujitsu.com
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 375-8560
Fax: (65) 273-3021
Email: [email protected]
www.fcal.fujitsu.com
NO
TF
DE
OR
© 2001 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks
of their respective owners. Rev. 09/2001
NE
GN
BE R1
W
8
S
ND
DI
SC
/H
ON D
T
EX
T
O
IN
C
EP
FB
IE
D
T
R1
8W
D
SI
6
Similar pages