Fairchild FDR858P Single p-channel, logic level, powertrenchtm mosfet Datasheet

February 1999
FDR858P
Single P-Channel, Logic Level, PowerTrenchTM MOSFET
General Description
Features
The SuperSOT-8 family of P-Channel Logic Level
MOSFETs have been designed to provide a low profile,
small footprint alternative to industry standard SO-8 little
foot type product.
This P-Channel Logic Level MOSFET is produced
using Fairchild Semiconductor's advanced PowerTrench
process that has been especially tailored to minimize the
on-state resistance and yet maintain low gate charge for
superior switching performance.
These devices are well suited for notebook computer
applications: load switching and power management,
battery charging circuits, and DC/DC conversion.
SuperSOTTM -8
SuperSOTTM-6
SOT-23
D
D
S
S
D
TM
SuperSOT -8
D
G
D
Mark: 858P
Absolute Maximum Ratings
Symbol
Parameter
VDSS
Drain-Source Voltage
VGSS
Gate-Source Voltage
ID
Draint Current - Continuous
PD
Maximum Power Dissipation
Low gate charge (21nC typical).
High performance trench technology for extremely low
RDS(ON).
SuperSOTTM-8 package: small footprint (40%) less than
SO-8); low profile (1mm thick); maximum power
comperable to SO-8.
SO-8
SOIC-16
SOT-223
5
4
6
3
7
2
8
1
TA = 25oC unless otherwise noted
(Note 1)
- Pulsed
Ratings
Units
-30
V
±20
V
-8
A
-50
(Note 1a)
1.8
(Note 1b)
1
(Note 1c)
TJ,TSTG
-8 A, -30 V. RDS(ON) = 0.019 Ω @ VGS = -10 V,
RDS(ON) = 0.028 Ω @ VGS = -4.5 V.
Operating and Storage Temperature Range
W
0.9
-55 to 150
°C
THERMAL CHARACTERISTICS
RθJA
Thermal Resistance, Junction-to-Ambient
(Note 1a)
70
°C/W
RθJC
Thermal Resistance, Junction-to-Case
(Note 1)
20
°C/W
© 1999 Fairchild Semiconductor Corporation
FDR858P Rev.C
Electrical Characteristics
Symbol
(TA = 25OC unless otherwise noted )
Parameter
Conditions
Min
Typ
Max
Units
OFF CHARACTERISTICS
BVDSS
Drain-Source Breakdown Voltage
VGS = 0 V, ID = -250 µA
-30
∆BVDSS/∆TJ
Breakdown Voltage Temp. Coefficient
ID = -50 µA, Referenced to 25 C
IDSS
Zero Gate Voltage Drain Current
VDS = -24 V, VGS = 0 V
o
V
mV /oC
-22
TJ = 55°C
-1
µA
-10
µA
IGSS
Gate - Body Leakage Current
VGS = 20 V, VDS = 0 V
100
nA
IGSS
Gate - Body Leakage, Reverse
VGS = -20 V, VDS = 0 V
-100
nA
ON CHARACTERISTICS (Note 2)
VGS(th)
Gate Threshold Voltage
VDS = VGS, ID = -250 µA
∆VGS(th)/∆TJ
Gate Threshold Voltage Temp.Coefficient
ID = -50 µA, Referenced to 25 oC
-1
RDS(ON)
Static Drain-Source On-Resistance
VGS = -10 V, ID = -8 A
-1.7
-3
V
mV /oC
4
TJ = 125°C
VGS = -4.5 V, ID = -6.3 A
0.0155
0.019
0.021
0.03
0.022
0.028
-50
Ω
ID(ON)
On-State Drain Current
VGS = -10 V, VDS = -5 V
gFS
Forward Transconductance
VDS = -10 V, ID = -3.2 A
25
A
S
VDS = -15 V, VGS = 0 V,
f = 1.0 MHz
2010
pF
590
pF
260
pF
DYNAMIC CHARACTERISTICS
Ciss
Input Capacitance
Coss
Output Capacitance
Crss
Reverse Transfer Capacitance
SWITCHING CHARACTERISTICS (Note 2)
tD(on)
Turn - On Delay Time
VDD = -15 V, ID = -1 A,
12
22
ns
tr
Turn - On Rise Time
VGS = -10V, RGEN = 6 Ω
15
27
ns
tD(off)
Turn - Off Delay Time
100
140
ns
tf
Turn - Off Fall Time
55
80
ns
Qg
Total Gate Charge
VDS = -15 V, ID = -8 A,
21
30
nC
Qgs
Gate-Source Charge
VGS = 5 V
6
nC
Qgd
Gate-Drain Charge
8
nC
DRAIN-SOURCE DIODE CHARACTERISTICS AND MAXIMUM RATINGS
IS
Maximum Continuous Drain-Source Diode Forward Current
VSD
Drain-Source Diode Forward Voltage
VGS = 0 V, IS = -0.67 A
(Note 2)
-0.7
-0.67
A
-1.2
V
Notes:
1. RθJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of the drain pins. RθJC is guaranteed
by design while RθCA is determined by the user's board design.
a. 70OC/W on a 1 in2 pad of 2oz
copper.
b. 125OC/W on a 0.026 in2 of pad
of 2oz copper.
c. 135OC/W on a 0.005 in2 of pad
of 2oz copper.
Scale 1 : 1 on letter size paper
2. Pulse Test: Pulse Width < 300µs, Duty Cycle < 2.0%.
FDR858P Rev.C
Typical Electrical Characteristics
2.5
V GS = -10V
R DS(on) , NORMALIZED
-6.0V
-4.5V
48
-4.0V
36
-3.5V
24
-3.0V
12
DRAIN-SOURCE ON-RESISTANCE
- I D , DRAIN-SOURCE CURRENT (A)
60
VGS= -3.5 V
2
-4.0V
-4.5V
1.5
-5.5V
-7.0V
-10V
1
0.5
0
0
1
2
3
4
0
5
10
20
30
40
50
- I D , DRAIN CURRENT (A)
- VDS , DRAIN-SOURCE VOLTAGE (V)
Figure 2. On-Resistance Variation with
Figure 1. On-Region Characteristics.
Drain Current and Gate Voltage.
0.08
ID = -4.0A
1.4
R DS(ON), ON-RESISTANCE (OHM)
ID = -8.0A
VGS = -10V
1.2
1
0.8
0.6
-50
-25
0
25
50
75
100
125
150
TJ , JUNCTION TEMPERATURE (° C)
0.06
0.04
TA = 125° C
0.02
25° C
0
0
2
50
-I S , REVERSE DRAIN CURRENT (A)
50
TJ = -55°C
6
8
10
Figure 4. On-Resistance Variation with
Gate-to-Source Voltage.
with Temperature.
V DS = -5V
4
- VGS , GATE TO SOURCE VOLTAGE (V)
Figure 3. On-Resistance Variation
- I D , DRAIN CURRENT (A)
R DS(ON), NORMALIZED
DRAIN-SOURCE ON-RESISTANCE
1.6
125°C
40
25°C
30
20
10
VGS = 0V
10
TJ = 125°C
25°C
-55°C
1
0.1
0.01
0.001
0.0001
0
1
2
3
4
-VGS , GATE TO SOURCE VOLTAGE (V)
Figure 5. Transfer Characteristics.
5
0
0.2
0.4
0.6
0.8
1
1.2
1.4
-VSD , BODY DIODE FORWARD VOLTAGE (V)
Figure 6. Body Diode Forward Voltage
Variation with Source Current
and Temperature.
FDR858P Rev.C
Typical Electrical Characteristics (continued)
4000
I D = -8A
VDS = -5V
-10V
8
CAPACITANCE (pF)
-V GS , GATE-SOURCE VOLTAGE (V)
10
-15V
6
4
Ciss
2000
1000
Coss
500
f = 1 MHz
VGS = 0 V
2
200
0.1
0
0
8
16
24
32
Crss
0.3
40
1
3
10
15
30
-VDS , DRAIN TO SOURCE VOLTAGE (V)
Q g , GATE CHARGE (nC)
Figure 7. Gate Charge Characteristics.
RD
N
S(O
)L
IM
10m
s
10
0m
s
1s
10s
DC
0.5
VGS = -10V
SINGLE PULSE
RθJA = 135°C/W
A T = 25°C
A
0.01
0.1
0.2
0.5
SINGLE PULSE
R θJA= 135°C/W
TA = 25°C
40
1m
s
5
0.05
50
100
us
IT
POWER (W)
20
30
20
10
1
2
5
10
20 30
0
0.0001
50
0.001
0.01
0.1
1
10
100 300
SINGLE PULSE TIME (SEC)
- VDS , DRAIN-SOURCE VOLTAGE (V)
Figure 10. Single Pulse Maximum Power
Dissipation.
Figure 9. Maximum Safe Operating Area.
1
r(t), NORMALIZED EFFECTIVE
TRANSIENT THERMAL RESISTANCE
- ID, DRAIN CURRENT (A)
80
Figure 8. Capacitance Characteristics.
0.5
D = 0.5
R θJA (t) = r(t) * RθJA
R θJA = 135°C/W
0.3
0.2
0.1
0.2
0.1
P(pk)
0.05
t1
0.05
0.03
0.02
0.01
0.0001
0.02
Single Pulse
0.001
t2
TJ - TA = P * R θJA (t)
Duty Cycle, D = t 1/ t 2
0.01
0.01
0.1
1
10
100
300
t 1, TIME (sec)
Figure 11. Transient Thermal Response Curve.
Thermal characterization performed using the conditions described in note 1c.
Transient thermal response will change depending on the circuit board design.
FDR858P Rev.C
SuperSOTTM-8 Tape and Reel Data and Package Dimensions
SSOT-8 Packaging
Configuration: Figure 1.0
Customized Label
Packaging Description:
F63TNR Label
Anti static Cover Tape
SSOT-8 parts are shipped in tape. The carrier tape is
made from a di ssipat ive (carbo n filled) po ly carbon ate
resin. The cover tape is a multilayer film (Heat Activated
Adhesive in nature) primarily composed of polyester film ,
adhesive layer, sealant, and anti-static sprayed agent.
These reeled parts in standard option are shipped w ith
3,000 units per 13" or 330cm diameter reel. The reels are
dark blue in color and is made of polystyrene plastic (antistatic coated). Other option comes in 500 unit s per 7" or
177cm diameter reel. This and some other options are
further described in the Packagin g Information table.
These full reels are in di vidu ally barcod e labeled and
placed inside a standard intermediate box (ill ustrated in
figure 1.0) made of recyclable corrugated brow n paper.
One box contains two reels maximum. And t hese boxes
are placed ins ide a barcode labeled shipp ing bo x whic h
comes in di fferent sizes depend in g on t he nu mber of parts
shippe d.
Static Dissi pat ive
Emboss ed Carrier Tape
F852
831N
F852
831N
F852
831N
F852
831N
F852
831N
Pin 1
SSOT-8 Packaging Information
Packaging Option
Packaging type
Qty per Reel/Tube/Bag
Reel Size
Box Dimension (mm)
Standard
(no f l ow c ode )
TNR
D84Z
SSOT-8 Unit Orientation
TNR
3,000
500
13" D ia
7" Dia
343x64x343
184x187x47
Max qty per Box
6,000
1,000
Weight per unit (gm)
0.0416
0.0416
Weight per Reel (kg)
0.5615
0.0980
343mm x 342mm x 64mm
Intermediate box for Standar d
and L99Z Opti ons
Note/Comments
F63TNR Label
F63TNR
Label
F63TNR Labe l sa mpl e
184mm x 187mm x 47mm
Pizza Box fo r D84Z Option
F63TNR
Label
SSOT-8 Tape Leader and Trailer
Configuration: Figur e 2.0
LOT: CBVK741B019
QTY: 3000
FSID: FDR835N
SPEC:
D/C1: D9842
D/C2:
QTY1:
QTY2:
SPEC REV:
CPN:
N/F: F
(F63TNR)3
Carrier Tape
Cover Tape
Components
Traile r Tape
300mm mi nimum or
38 empty pockets
Lead er Tape
500mm mi nimum or
62 empty poc kets
August 1999, Rev. C
SuperSOTTM-8 Tape and Reel Data and Package Dimensions, continued
SSOT-8 Embossed Carrier Tape
Configuration: Figur e 3.0
P0
D0
T
E1
F
K0
Wc
W
E2
B0
Tc
A0
D1
P1
User Direction of Feed
Dimensions are in millimeter
Pkg type
A0
B0
SSOT-8
(12mm)
4.47
+/-0.10
5.00
+/-0.10
W
12.0
+/-0.3
D0
D1
E1
E2
1.55
+/-0.05
1.50
+/-0.10
1.75
+/-0.10
F
10.25
mi n
5.50
+/-0.05
P1
P0
8.0
+/-0.1
4.0
+/-0.1
K0
T
Wc
1.37
+/-0.10
0.280
+/-0.150
9.5
+/-0.025
Notes : A0, B0, and K0 dimensions are deter mined with r espec t to t he EIA/Jedec RS-481
rotationa l and lateral movement requi remen ts (see sketches A, B, and C).
0.06
+/-0.02
0.5mm
maximum
20 deg maximum
Typical
component
cavity
center line
B0
Tc
0.5mm
maximum
20 deg maximum component rotation
Typical
component
center line
Sketch A (Si de or Front Sectional View)
A0
Component Rotation
Sketch C (Top View)
Component lateral movement
Sketch B (Top View)
SSOT-8 Reel Configuration: Figur e 4.0
Component Rotation
W1 Measured at Hub
Dim A
Max
Dim A
max
See detail AA
Dim N
7" Diameter Option
B Min
Dim C
See detail AA
W3
13" Diameter Option
Dim D
min
W2 max Measured at Hub
DETAIL AA
Dimensions are in inches and millimeters
Tape Size
Reel
Option
Dim A
Dim B
Dim C
Dim D
Dim N
Dim W1
Dim W2
Dim W3 (LSL-USL)
12mm
7" Dia
7.00
177.8
0.059
1.5
512 +0.020/-0.008
13 +0.5/-0.2
0.795
20.2
5.906
150
0.488 +0.078/-0.000
12.4 +2/0
0.724
18.4
0.469 – 0.606
11.9 – 15.4
12mm
13" Dia
13.00
330
0.059
1.5
512 +0.020/-0.008
13 +0.5/-0.2
0.795
20.2
7.00
178
0.488 +0.078/-0.000
12.4 +2/0
0.724
18.4
0.469 – 0.606
11.9 – 15.4
 1998 Fairchild Semiconductor Corporation
July 1999, Rev. C
SuperSOTTM-8 Tape and Reel Data and Package Dimensions, continued
SuperSOT-8 (FS PKG Code 34, 35)
1:1
Scale 1:1 on letter size paper
Di mensions shown below are in:
inches [millimeters]
Part Weight per unit (gram): 0.0416
September 1998, Rev. A
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
ISOPLANAR™
MICROWIRE™
POP™
PowerTrench™
QFET™
QS™
Quiet Series™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
ACEx™
CoolFET™
CROSSVOLT™
E2CMOSTM
FACT™
FACT Quiet Series™
FAST®
FASTr™
GTO™
HiSeC™
TinyLogic™
UHC™
VCX™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or
2. A critical component is any component of a life
support device or system whose failure to perform can
systems which, (a) are intended for surgical implant into
be reasonably expected to cause the failure of the life
the body, or (b) support or sustain life, or (c) whose
support device or system, or to affect its safety or
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
effectiveness.
reasonably expected to result in significant injury to the
user.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or
In Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Similar pages