FED30 SERIES 30 WATTS DC-DC CONVERTER FEATURES • 30 WATTS MAXIMUM OUTPUT POWER • OUTPUT CURRENT UP TO 8.5A • STANDARD 2.00 X 1.00 X 0.40 INCH • HIGH EFFICIENCY UP TO 91% • 2:1 WIDE INPUT VOLTAGE RANGE • SIX-SIDED CONTINUOUS SHIELD • FIXED SWITCHING FREQUENCY • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH OPTIONS APPLICATIONS Wireless Network Telecom/Datacom Industry Control System Measurement Semiconductor Equipment NEGATIVE LOGIC REMOTE ON/OFF DESCRIPTION The FED30 series offer 30 watts of output power from a 2 x 1 x 0.4 inch package. FED30 series have 2:1 wide input voltage of 9~18VDC, 18~36 and 36~75VDC. The FED30 series have features 1600VDC of isolation, short circuit protection, over-current protection, over-voltage protection, over-temperature protection and six sided shielding. T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted INPUT SPECIFICATIONS OUTPUT SPECIFICATIONS Output power 30 Watts max. Voltage accuracy Voltage adjustability ±1% Single output ± 10% Minimum load Line regulation 0% LL to HL at Full Load ± 0.2% Single ± 0.5% Load regulation No load to Full load ± 1% Dual Cross regulation (Dual) Asymmetrical load 25% / 100% FL ± 5% 1.5-5.1Vo 100mVp-p 20MHz bandwidth Ripple and noise (Measured with a 1uF/50V MLCC) 12-15Vo 150mVp-p ±0.02% / ºC, max. Temperature coefficient Transient response recovery time 25% load step change 250µs 1.5V Output 2.0V 2.5V Output 3.3V Over voltage protection 3.3V Output 3.9V 5.0V & 5.1V & ±5V Zener diode clamp Output 6.2V 12V & ±12V Output 15V Output 18V 15V & ±15V Over load protection % of FL at nominal input 150% Short circuit protection Continuous, automatics recovery GENERAL SPECIFICATIONS Efficiency See table Input to Output 1600VDC min. 1minute Isolation voltage Input (Output) to Case 1600VDC min. 1minute Case grounding Connect case to –input with decoupling Y Cap Isolation resistance 500VDC 109ohms, min. Isolation capacitance 1500pF, max. Switching frequency Safety approvals 430kHz± 10% IEC60950-1, UL60950-1, & EN60950-1 Case material Nickel-coated copper Base material Potting material FR4 PCB Epoxy (UL94 V-0) 2.00 X 1.00 X 0.40 Inch (50.8X 25.4 X 10.2 mm) 30.5g(1.07oz) Dimensions Weight MTBF (Note 1) Page 1 of 3 MIL-HDBK-217F 1.453 x 106 hrs. Input voltage range 12VDC nominal input 24VDC nominal input 48VDC nominal input 9 ~ 18VDC 18 ~ 36VDC 36 ~ 75VDC Pi type 25VDC 100ms, max. 50VDC 100ms, max. 100VDC 100ms, max. 20mAp-p Power up 30ms Remote ON/OFF 30ms 9VDC, max. 18VDC, max. 36VDC, max. 8VDC 16VDC 32VDC Input filter 12VDC input 24VDC input 48VDC input Input reflected ripple current Nominal input and Start up time constant resistive load 12VDC input Start-up voltage 24VDC input 48VDC input 12VDC input Shutdown voltage 24VDC input 48VDC input Remote ON/OFF (Note 5) (Positive logic)(Standard) DC-DC ON Open or 3V < Vr < 12V DC-DC OFF Short or 0V < Vr < 1.2V (Negative logic)(Option) DC-DC ON Short or 0V < Vr < 1.2V DC-DC OFF Open or 3V < Vr < 12V Input current of Remote control pin Nominal Input -0.5mA ~ +0.5mA Remote off state input current Nominal Input 3mA Input surge voltage ENVIRONMENTAL SPECIFICATIONS -40ºC to +50ºC (without derating) +50ºC to +85ºC (with derating) Maximum case temperature 105ºC Storage temperature range -55ºC to +125ºC Over temperature protection 115ºC Thermal impedance Nature convection 12ºC/Watt (Note 6) Nature convection with heat-sink 10ºC/Watt Thermal shock MIL-STD-810F Operating ambient temperature Vibration Relative humidity MIL-STD-810F 5% to 95% RH EMC CHARACTERISTICS EMI ESD EN61000-4-2 Radiated immunity EN61000-4-3 Class A, Class B ± 8kV Perf. Criteria A ± 6kV 10 V/m Perf. Criteria A Fast transient (Note 8) EN61000-4-4 Surge (Note 8) EN61000-4-5 Conducted immunity EN61000-4-6 ± 2kV Perf. Criteria A ± 1kV Perf. Criteria A 10 Vr.m.s Perf. Criteria A www.pduke.com (Note 7) EN55022 Air Contact 2014/4/30 FED30 SERIES 30 WATTS Model Number Input Range Output Voltage FED30-12S1P5 FED30-12S2P5 FED30-12S3P3 FED30-12S05 FED30-12S5P1 FED30-12S12 FED30-12S15 FED30-12D05 FED30-12D12 FED30-12D15 FED30-24S1P5 FED30-24S2P5 FED30-24S3P3 FED30-24S05 FED30-24S5P1 FED30-24S12 FED30-24S15 FED30-24D05 FED30-24D12 FED30-24D15 FED30-48S1P5 FED30-48S2P5 FED30-48S3P3 FED30-48S05 FED30-48S5P1 FED30-48S12 FED30-48S15 FED30-48D05 FED30-48D12 FED30-48D15 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 18 ~ 36 VDC 18 ~ 36 VDC 18 ~ 36 VDC 18 ~36 VDC 18 ~ 36 VDC 18 ~ 36 VDC 18 ~ 36 VDC 18 ~ 36 VDC 18 ~ 36 VDC 18 ~ 36 VDC 36 ~ 75 VDC 36 ~ 75 VDC 36 ~ 75 VDC 36 ~ 75 VDC 36 ~ 75 VDC 36 ~ 75 VDC 36 ~ 75 VDC 36 ~ 75 VDC 36 ~ 75 VDC 36 ~ 75 VDC 1.5 VDC 2.5 VDC 3.3 VDC 5.0 VDC 5.1 VDC 12 VDC 15 VDC ±5VDC ±12VDC ±15VDC 1.5 VDC 2.5 VDC 3.3 VDC 5.0 VDC 5.1 VDC 12 VDC 15 VDC ±5VDC ±12VDC ±15VDC 1.5 VDC 2.5 VDC 3.3 VDC 5.0 VDC 5.1 VDC 12 VDC 15 VDC ±5VDC ±12VDC ±15VDC Output Current Min. Load 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA Max. Load 8500mA 8000mA 8000mA 6000mA 6000mA 2500mA 2000mA ±3000mA ±1250mA ±1000mA 8500mA 8000mA 8000mA 6000mA 6000mA 2500mA 2000mA ±3000mA ±1250mA ±1000mA 8500mA 8000mA 8000mA 6000mA 6000mA 2500mA 2000mA ±3000mA ±1250mA ±1000mA DC-DC CONVERTER (2) (3) (4) Output (3) Ripple & Noise No load Input Current Eff (%) Capacitor Load max 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 100mVp-p 150mVp-p 150mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 100mVp-p 150mVp-p 150mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 100mVp-p 150mVp-p 150mVp-p 70mA 100mA 90mA 130mA 130mA 90mA 80mA 90mA 50mA 40mA 50mA 50mA 50mA 75mA 75mA 40mA 30mA 70mA 30mA 30mA 45mA 45mA 30mA 45mA 45mA 40mA 40mA 35mA 30mA 20mA 79 84 85 87 87 89 89 87 87 87 80 85 87 90 90 91 91 90 89 90 80 85 87 90 89 91 91 90 88 89 20000µF 20000µF 20000µF 14400µF 14400µF 3000µF 2000µF ± 3000µF ± 2000µF ± 1300µF 20000µF 20000µF 20000µF 14400µF 14400µF 3000µF 2000µF ± 3000µF ± 2000µF ± 1300µF 20000µF 20000µF 20000µF 14400µF 14400µF 3000µF 2000µF ± 3000µF ± 2000µF ± 1300µF Note MIL-HDBK-217F @Ta=25 ºC, Full load. Typical value at nominal input voltage and no load. Typical value at nominal input voltage and full load. Test by minimum input and constant resistive load. The CTRL pin voltage is referenced to -INPUT. Heat-sink is optional and P/N: 7G-0020A-F. The FED30 series standard module meets EN55022 Class A and Class B with external components. For more detail information, please contact with P-DUKE. 8. An external filter capacitor is required if the module has to meet EN61000-4-4,EN61000-4-5. The filter capacitor Power Mate suggest: 12 VDC INPUT & 24 VDC INPUT : Nippon chemi-con KY series, 330µF/50V. 48 VDC INPUT : Nippon chemi-con KY series, 220µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. 1. 2. 3. 4. 5. 6. 7. FED30-48S05 Derating Curve FED30-48S05 Derating Curve with Heat-Sink 120 OUTPUT POWER (%) OUTPUT POWER (%) 120 100 80 60 40 20 100 80 60 40 20 0 0 -40 -20 0 20 40 60 65 AMBIENT TEMPERATURE( 80 ℃) 100 71 120 -40 -20 0 20 40 60 80 AMBIENT TEMPERATURE( 100 120 ℃) FED30-48S05 Efficiency VS Output Load FED30-48S05 Efficiency VS Output Load FED30-48S05 Efficiency VSVS Input voltage FED30-48S05 Efficiency Output Load 95% 95 EFFICIENCY (%) EFFICIENCY (%) 90 93% 91% 89% 87% 85% 80 75 70 65 60 55 36 40 44 48 52 56 60 64 68 72 10 76 20 30 40 50 60 70 80 90 100 OUTPUT LOAD (% of Full Load) INPUT VOLTAGE (V) Page 2 of 3 85 www.pduke.com 2014/4/30 FED30 SERIES 30 WATTS DC-DC CONVERTER MECHANICAL DRAWING 1. All dimensions in Inch (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.004 (0.1) EXTERNAL OUTPUT TRIMMING PIN CONNECTION Page 3 of 3 PIN SINGLE DUAL 1 + INPUT + INPUT 2 - INPUT - INPUT 3 CTRL CTRL 4 + OUTPUT + OUTPUT 5 - OUTPUT COMMON 6 TRIM - OUTPUT Output can be externally trimmed by using the method shown below. TRIM UP TRIM DOWN 6 6 RU 5 www.pduke.com RD 4 2014/4/30