E2 B2 C2 TRANSISTOR TYPE C1 C1 B1 E1 NPN C2 B2 E2 PNP E1 C1 C2 SC70-6 Mark: .AA FFB2227A / FMB2227A FMB2227A FFB2227A B2 B1 pin #1 E1 SuperSOT-6 Dot denotes pin #1 E2 pin #1 B1 Mark: .001 Dot denotes pin #1 NPN & PNP General Purpose Amplifier This complementary device is for use as a medium power amplifier and switch requiring collector currents up to 500 mA. Sourced from Process 19 and 63. See FFB2222A (NPN) and FFB2907A (PNP) for characteristics. Absolute Maximum Ratings* Symbol TA = 25°C unless otherwise noted Parameter Value Units VCEO Collector-Emitter Voltage 30 V VCBO Collector-Base Voltage 60 V VEBO Emitter-Base Voltage 5.0 V IC Collector Current - Continuous 500 mA TJ, Tstg Operating and Storage Junction Temperature Range -55 to +150 °C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. 3) All voltages (V) and currents (A) are negative polarity for PNP transistors. Thermal Characteristics Symbol PD RθJA TA = 25°C unless otherwise noted Characteristic Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Ambient 1998 Fairchild Semiconductor Corporation Max FFB2227A 300 2.4 415 Units FMB2227A 700 5.6 180 mW mW/°C °C/W 4 (continued) Electrical Characteristics Symbol TA = 25°C unless otherwise noted Parameter Test Conditions Min Typ Max Units OFF CHARACTERISTICS V(BR)CEO IC = 10 mA, IB = 0 V(BR)CBO Collector-Emitter Breakdown Voltage* Collector-Base Breakdown Voltage 30 V V(BR)EBO Emitter-Base Breakdown Voltage IC = 10 µA, IE = 0 60 V IE = 10 µA, IC = 0 5.0 ICBO Collector Cutoff Current VCB = 50 V, IE = 0 30 nA IEBO Emitter Cutoff Current VEB = 3.0 V, IC = 0 30 nA 0.4 1.4 1.3 V V V V ON CHARACTERISTICS hFE DC Current Gain VCE(sat) Collector-Emitter Saturation Voltage* VBE(sat) Base-Emitter Saturation Voltage* IC = 1.0 mA, VCE = 10 V IC = 10 mA, VCE = 10 V IC = 150 mA, VCE = 10 V* IC = 300mA, VCE = 10 V* IC = 150 mA, IB = 15 mA IC = 300 mA, IB = 30 mA IC = 150 mA, IB = 15 mA 50 75 100 30 SMALL SIGNAL CHARACTERISTICS fT Current Gain - Bandwidth Product 250 MHz Output Capacitance IC = 50 mA, VCE = 20 V, f = 100 MHz VCB = 10 V, IE = 0, f = 100 kHz Cobo Cibo NF 4.0 pF Input Capacitance VEB = 2.0 V, IC = 0, f = 100 kHz 12 pF Noise Figure IC = 100 µA, VCE = 10 V, RS = 1.0 kΩ, f = 1.0 kHz 2.0 dB SWITCHING CHARACTERISTICS ton Turn-on Time VCC = 30 V, IC = 150 mA, 30 ns td Delay Time IB1 = 15 mA 8.0 ns tr Rise Time 20 ns toff Turn-off Time VCC = 6.0 V, IC = 150 mA 80 ns ts Storage Time IB1 = IB2 = 15 mA 60 ns tf Fall Time 20 ns *Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 2.0% NOTE: All voltages (V) and currents (A) are negative polarity for PNP transistors. FFB2227A / FMB2227A NPN & PNP General Purpose Amplifier TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ DOME™ E2CMOSTM EnSignaTM FACT™ FACT Quiet Series™ FAST FASTr™ GlobalOptoisolator™ GTO™ HiSeC™ ISOPLANAR™ MICROWIRE™ OPTOLOGIC™ OPTOPLANAR™ PACMAN™ POP™ PowerTrench QFET™ QS™ QT Optoelectronics™ Quiet Series™ SILENT SWITCHER SMART START™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ UHC™ VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. G