EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 0603 Package Chip LED (0.4mm Height) 19-217/T1D-JP1Q2QY/3T Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. ․The product itself will remain with in RoHS compliant version Descriptions ․The 19-217 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide Part No. 19-217/T1D-JP1Q2QY/3T Revision Chip Material Emitted Color Resin Color Pure White Yellow Diffused InGaN Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-197-T22 Prepared date: 13-Jul-2007 :1 LifecyclePhase: Rev 1 Page: 1 of 12 Prepared by: Pengchunya Release Date:2008-09-20 00:16:11.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 19-217/T1D-JP1Q2QY/3T Package Outline Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-197-T22 Prepared date: 13-Jul-2007 :1 LifecyclePhase: Rev 1 Page: 2 of 12 Prepared by: Pengchunya Release Date:2008-09-20 00:16:11.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 19-217/T1D-JP1Q2QY/3T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA IFP 100 mA Power Dissipation Pd 110 mW Electrostatic Discharge(HBM) ESD 150 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Peak Forward Current (Duty 1/10 @1KHz) Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Luminous Intensity IV 45.0 ----- 112 mcd Viewing Angle 2θ1/2 ----- 130 ----- deg Forward Voltage VF 2.70 ----- 3.20 V Reverse Current IR ----- ----- 50 μA Condition IF=5mA VR=5V Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Forward Voltage ±0.05V Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-197-T22 Prepared date: 13-Jul-2007 :1 LifecyclePhase: Rev 1 Page: 3 of 12 Prepared by: Pengchunya Release Date:2008-09-20 00:16:11.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 19-217/T1D-JP1Q2QY/3T Bin Range Of Luminous Intensity Bin Code Min. Max. P1 45.0 57.0 P2 57.0 72.0 Q1 72.0 90.0 Q2 90.0 112 Unit Condition mcd IF=5mA Unit Condition V IF=5mA Bin Range Of Forward Voltage Symbol Bin Code Q Min. Max. 29 2.70 2.80 30 2.80 2.90 31 2.90 3.00 32 3.00 3.10 33 3.10 3.20 Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Forward Voltage ±0.05V Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-197-T22 Prepared date: 13-Jul-2007 :1 LifecyclePhase: Rev 1 Page: 4 of 12 Prepared by: Pengchunya Release Date:2008-09-20 00:16:11.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 19-217/T1D-JP1Q2QY/3T Chromaticity Coordinates Specifications for Bin Grading Groups Bin Code X4 X3 J X2 X1 CIE_x CIE_y 0.234 0.202 0.234 0.235 0.254 0.263 0.254 0.230 0.234 0.170 0.234 0.202 0.254 0.230 0.254 0.198 0.254 0.230 0.254 0.263 0.274 0.291 0.274 0.258 0.254 0.198 0.254 0.230 0.274 0.258 0.274 0.226 Condition IF=5mA Notes: 1.The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01). 2.The products are sensitive to static electricity and care must be fully taken when handling products. Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-197-T22 Prepared date: 13-Jul-2007 :1 LifecyclePhase: Rev 1 Page: 5 of 12 Prepared by: Pengchunya Release Date:2008-09-20 00:16:11.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 19-217/T1D-JP1Q2QY/3T CIE Chromaticity Diagram Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-197-T22 Prepared date: 13-Jul-2007 :1 LifecyclePhase: Rev 1 Page: 6 of 12 Prepared by: Pengchunya Release Date:2008-09-20 00:16:11.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 19-217/T1D-JP1Q2QY/3T Typical Electro-Optical Characteristics Curves S p e c tru m D is trib u tio n F o rw a rd C u rre n t v s. F o rw a rd V o lta g e T a = 2 5 °C Forward Current 75 50 25 0 400 500 600 700 40 30 20 10 0 2 .6 800 W a v e le n g th λ (n m ) F o rw a rd C u rre n t A m b ie n t T e m p e ra tu re Relative luminous intensity (%) 1000 100 10 1 -6 0 -4 0 -2 0 0 20 40 3 .0 3 .4 3 .8 4 .2 4 .5 F o rw a rd V o lta g e (VF)-v o lts L u m in o u s In te n s ity v s L u m in o u s In te n s ity v s. Relative luminous intensity (%) T a = 2 5 °C 50 IF (mA) Relative luminous intensity (%) 100 60 80 100 1000 T a = 2 5 °C f= 1 K H z D u ty= 1 /1 0 100 10 1 0 10 1 10 2 10 F o rw a rd C u rre n t I F (m A ) A m b ie n t T e m p e ra tu re T a (°C ) R a d ia tio n D ia g ra m F o rw a rd C u rre n t D e ra tin g C u rv e T a = 2 5 °C Forward Current I (mA) F 50 40 30 25 20 10 0 Revision 20 0 40 60 85 A m b ie n t T e m p e ra tu re Ta (°C ) 100 Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-197-T22 Prepared date: 13-Jul-2007 :1 LifecyclePhase: Rev 1 Page: 7 of 12 Prepared by: Pengchunya Release Date:2008-09-20 00:16:11.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 19-217/T1D-JP1Q2QY/3T Label explanation CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank RoHS Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-197-T22 Prepared date: 13-Jul-2007 :1 LifecyclePhase: Rev 1 Page: 8 of 12 Prepared by: Pengchunya Release Date:2008-09-20 00:16:11.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 19-217/T1D-JP1Q2QY/3T Carrier Tape Dimensions： Loaded quantity 3000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm,Unit = mm Moisture Resistant Packaging Label Revision Aluminum moisture-proof bag Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-197-T22 Prepared date: 13-Jul-2007 :1 LifecyclePhase: Desiccant Rev 1 Label Page: 9 of 12 Prepared by: Pengchunya Release Date:2008-09-20 00:16:11.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 19-217/T1D-JP1Q2QY/3T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Ac/Re Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 2 3 High Temperature Storage Low Temperature Storage 4 5 Revision Test Sample Hours/Cycles Size No. 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-197-T22 Prepared date: 13-Jul-2007 :1 LifecyclePhase: Rev 1 Page: 10 of 12 Prepared by: Pengchunya Release Date:2008-09-20 00:16:11.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 19-217/T1D-JP1Q2QY/3T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-197-T22 Prepared date: 13-Jul-2007 :1 LifecyclePhase: Rev 1 Page: 11 of 12 Prepared by: Pengchunya Release Date:2008-09-20 00:16:11.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 19-217/T1D-JP1Q2QY/3T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Revision Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-197-T22 Prepared date: 13-Jul-2007 :1 LifecyclePhase: Rev 1 Page: 12 of 12 Prepared by: Pengchunya Release Date:2008-09-20 00:16:11.0 Expired Period: Forever