Fairchild FODM3011 4-pin full pitch mini-flat package random-phase triac driver output optocoupler Datasheet

FODM3011, FODM3012, FODM3022, FODM3023,
FODM3052, FODM3053
4-Pin Full Pitch Mini-Flat Package Random-Phase Triac
Driver Output Optocouplers
Features
Applications (Continued)
■ Compact 4-pin surface mount package (2.4 mm
■ Solid state relay
■
■
■
■
maximum standoff height)
Peak blocking voltage
250V (FODM301X)
400V (FODM302X)
600V (FODM305X)
Available in tape and reel quantities of 2500.
Add “NF098” for new construction version with 260°C
max. reflow temperature rating
UL, C-UL and VDE certifications pending
Applications
■ Industrial controls
■ Traffic lights
■ Vending machines
■ Lamp ballasts
■ Solenoid/valve controls
■ Static AC power switch
■ Incandescent lamp dimmers
■ Motor control
Description
The FODM301X, FODM302X, and FODM305X series
consists of a GaAs infrared emitting diode driving a
silicon bilateral switch housed in a compact 4-pin
mini-flat package. The lead pitch is 2.54mm. They are
designed for interfacing between electronic controls and
power triacs to control resistive and inductive loads for
115V/240V operations.
Package Dimensions
4.40±0.20
ANODE 1
MAIN
4 TERMINAL
CATHODE 2
MAIN
3 TERMINAL
2.54±0.25
3.60±0.30
2.00±0.20
5.30±0.30
0.20±0.05
0.10±0.10
0.40±0.10
7.00 +0.2
–0.7
Note:
All dimensions are in millimeters.
©2003 Fairchild Semiconductor Corporation
FODM30XX Rev. 1.0.6
www.fairchildsemi.com
FODM30XX — 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers
April 2009
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
Parameter
Value
Units
TOTAL PACKAGE
TSTG
Storage Temperature
-55 to +150
°C
TOPR
Operating Temperature
-40 to +100
°C
EMITTER
IF (avg)
Continuous Forward Current
60
mA
IF (pk)
Peak Forward Current (1µs pulse, 300pps.)
1
A
VR
Reverse Input Voltage
3
V
PD
Power Dissipation (No derating required over operating temp. range)
100
mW
IT(RMS)
On-State RMS Current
70
mA (RMS)
VDRM
Off-State Output Terminal Voltage
FODM3011/FODM3012
250
V
FODM3022/FODM3023
400
FODM3052/FODM3053
600
DETECTOR
PD
Power Dissipation (No derating required over operating temp. range)
©2003 Fairchild Semiconductor Corporation
FODM30XX Rev. 1.0.6
300
mW
www.fairchildsemi.com
2
FODM30XX — 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers
Absolute Maximum Ratings (TA = 25°C unless otherwise specified)
Individual Component Characteristics
Symbol
Parameter
Test Conditions
Device
Min.
Typ.*
Max.
Unit
EMITTER
VF
Input Forward Voltage
IF = 10mA
All
1.20
1.5
V
IR
Reverse Leakage Current
VR = 3V, TA = 25°C
All
0.01
100
µA
All
2
100
nA
FODM3011,
FODM3012,
FODM3022,
FODM3023
10
DETECTOR
IDRM
Peak Blocking Current Either
Direction
Rated VDRM, IF = 0(1)
dV/dt
Critical Rate of Rise of
Off-State Voltage
IF = 0 (Figure 8)(2)
FODM3052,
FODM3053
V/µs
1,000
Transfer Characteristics
Symbol
IFT
IH
VTM
DC Characteristics
LED Trigger Current
Test Conditions
Main Terminal
Voltage = 3V(3)
Device
Min.
Typ.*
Max.
Unit
FODM3011,
FODM3022,
FODM3052
10
mA
FODM3012,
FODM3023,
FODM3053
5
Holding Current, Either
Direction
All
300
µA
Peak On-State Voltage Either ITM = 100mA peak
Direction
All
1.7
3
V
Typ.*
Max.
Unit
Isolation Characteristics
Symbol
VISO
Characteristic
Steady State Isolation
Voltage
Test Conditions
1 Minute,
R.H. = 40% to 60%
Device
Min.
All
3750
VRMS
*All typicals at TA = 25°C
Notes:
1. Test voltage must be applied within dv/dt rating.
2. This is static dv/dt. See Figure 1 for test circuit Commutating dv/dt is function of the load-driving thyristor(s) only.
3. All devices are guaranteed to trigger at an IF value less than or equal to max IFT. Therefore, recommended operating
IF lies between max IFT (10mA for FODM3011, FODM3022, and FODM3052, 5mA for FODM3012, FODM3023,
and FODM3053) and absolute max IF (60mA).
©2003 Fairchild Semiconductor Corporation
FODM30XX Rev. 1.0.6
www.fairchildsemi.com
3
FODM30XX — 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers
Electrical Characteristics (TA = 25°C)
Fig. 1 LED Forward Voltage vs. Forward Current
Fig. 2 Leakage Current vs. Ambient Temperature
1000
1.8
VDRM = 600V
1.7
IDRM - LEAKAGE CURRENT (nA)
VF - FORWARD VOLTAGE (V)
1.6
1.5
1.4
TA = -40°C
1.3
1.2
TA = 25°C
1.1
100
10
1
TA = 100°C
1.0
0.1
-40
0.9
1
10
100
-20
IF - FORWARD CURRENT (mA)
Fig. 3 Holding Current vs. Ambient Temperature
20
60
80
100
Fig. 4 Trigger Current vs. Ambient Temperature
VTM = 3V
NORMALIZED TO TA = 25°C
I FT - TRIGGER CURRENT (NORMALIZED)
NORMALIZED TO TA = 25°C
1.0
0.1
-40
40
1.6
10
I H - HOLDING CURRENT (NORMALIZED)
0
T A - AMBIENT TEMPERATURE (°C)
-20
0
20
40
60
80
100
1.4
1.2
1.0
0.8
0.6
0.8
-40
T A - AMBIENT TEMPERATURE (°C)
-20
0
20
40
60
80
100
T A - AMBIENT TEMPERATURE (°C)
©2003 Fairchild Semiconductor Corporation
FODM30XX Rev. 1.0.6
www.fairchildsemi.com
4
FODM30XX — 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers
Typical Performance Curves
Fig. 5 LED Current Required to Trigger vs. LED Pulse Width
Fig. 6 Off-State Output Terminal Voltage vs. Ambient Temperature
1.4
TA =T25°C
A
NORMALIZED TO PW IN >> 100µs
10
8
6
4
2
NORMALIZED TO TA = 25°C
1.3
1.2
(NORMALIZED)
V DRM- OFF-STATE OUTPUT TERMINAL VOLTAGE
IFT - LED TRIGGER CURRENT (NORMALIZED)
12
1.1
1.0
0.9
0.8
0.7
0.6
-40
0
1
10
0
-20
100
20
40
60
80
100
T A - AMBIENT TEMPERATURE (°C)
PW IN - LED TRIGGER PULSE WIDTH (°C)
Fig. 7 On-State Characteristics
800
TA = 25°C
ITM - ON-STATE CURRENT (mA)
600
400
200
0
-200
-400
-600
-800
-4
-3
-2
-1
0
1
2
3
4
VTM - ON-STATE VOLTAGE (V)
©2003 Fairchild Semiconductor Corporation
FODM30XX Rev. 1.0.6
www.fairchildsemi.com
5
FODM30XX — 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers
Typical Performance Curves (Continued)
600V (FODM3052)
(FODM3053)
400V (FODM3022)
Vdc
(FODM3023)
250V (FODM3011)
(FODM3012)
RTEST
R = 10 kΩ
CTEST
PULSE
INPUT
MERCURY
WETTED
RELAY
APPLIED VOLTAGE
WAVEFORM
X100
SCOPE
PROBE
D.U.T.
1. The mercury wetted relay provides a high speed
repeated pulse to the D.U.T.
2. 100x scope probes are used, to allow high speeds and
voltages.
3. The worst-case condition for static dv/dt is established by
triggering the D.U.T. with a normal LED input current,
then removing the current. The variable RTEST allows the
dv/dt to be gradually increased until the D.U.T. continues
to trigger in response to the applied voltage pulse, even
after the LED current has been removed. The dv/dt is
then decreased until the D.U.T. stops triggering. τRC is
measured at this point and recorded.
Vmax = 600 V (FODM3052, FODM3053)
= 400 V (FODM3022, FODM3023)
= 250 V (FODM3011, FODM3012)
378 V (FODM3052, FODM3053)
252 V (FOMD3022, FODM3023)
158 V (FODM3011, FODM3012)
dv/dt =
0 VOLTS
0.63 Vmax
τRC
τRC
NOTE: This optoisolator should not be used to drive a load directly. It is
intended to be a trigger device only.
378
= τ
(FODM3053)
RC (FODM3052)
252
= τ
(FODM3023)
RC (FODM3022)
158
= τ
(FODM3011)
RC (FODM3012)
Figure 8. Static dv/dt Test Circuit
RL
Rin
1
VCC
2
4
FODM3011
FODM3012
FODM3022
FODM3023
FODM3052
FODM3053
180
120 V
60 Hz
3
Figure 9. Resistive Load
ZL
Rin
1
VCC
2
4
FODM3011
FODM3012
FODM3022
FODM3023
FODM3052
FODM3053
180
2.4k
120 V
60 Hz
0.1 µF
C1
3
Figure 10. Inductive Load with Sensitive Gate Triac (IGT ≤ 15 mA)
©2003 Fairchild Semiconductor Corporation
FODM30XX Rev. 1.0.6
www.fairchildsemi.com
6
FODM30XX — 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers
Typical Application Information
Rin
1
4
360
470
HOT
VCC
2
FODM3022
FODM3023
FODM3052
FODM3053
0.05 µF
39
240
VAC
3
0.01 µF
LOAD
GROUND
In this circuit the “hot” side of the line is switched and the load connected to the cold or ground side.
The 39Ω resistor and 0.01µF capacitor are for snubbing of the triac, and the 470Ω resistor and 0.05µF capacitor are for
snubbing the coupler. These components may or may not be necessary depending upon the particular and load used.
Figure 11. Typical Application Circuit
©2003 Fairchild Semiconductor Corporation
FODM30XX Rev. 1.0.6
www.fairchildsemi.com
7
FODM30XX — 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers
Typical Application Information (Continued)
Option
Description
V_NF098
VDE Approved
R2_NF098
Tape and Reel (2500 units)
R2V_NF098
Tape and Reel (2500 units) and VDE Approved
Note:
To specify the new construction version with 260°C max reflow peak temperature rating: Add "NF098" to the end of the
part number. The non NF098 version is rated for 230°C peak reflow temperature.
Marking Information
1
3011
2
V X YY R
6
3
4
5
Definitions
1
Fairchild logo
2
Device number
3
VDE mark (Note: Only appears on parts ordered with VDE
option – See order entry table)
4
One digit year code
5
Two digit work week ranging from ‘01’ to ‘53’
6
Assembly package code
©2003 Fairchild Semiconductor Corporation
FODM30XX Rev. 1.0.6
8
www.fairchildsemi.com
FODM30XX — 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers
Ordering Information
K0
P2
P0
t
D0
E
A0
W1
W
B0
d
F
D1
P
2.54 Pitch
Description
Symbol
Dimensions
Tape Width
W
12.00±0.4
Tape Thickness
t
0.35±0.02
Sprocket Hole Pitch
P0
4.00±0.20
Sprocket Hole Dia.
D0
1.55±0.20
Sprocket Hole Location
E
1.75±0.20
Pocket Location
F
5.50±0.20
P2
2.00±0.20
Pocket Pitch
P
8.00±0.20
Pocket Dimension
A0
4.75±0.20
B0
7.30±0.20
K0
2.30±0.20
Pocket Hole Dia.
D1
1.55±0.20
Cover Tape Width
W1
9.20
Cover Tape Thickness
d
Max. Component Rotation or Tilt
20° max
Devices Per Reel
2500
Reel Diameter
©2003 Fairchild Semiconductor Corporation
FODM30XX Rev. 1.0.6
0.065±0.02
330 mm (13")
www.fairchildsemi.com
9
FODM30XX — 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers
Tape Specifications
FODM30XX — 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers
Footprint Drawing for PCB Layout
0.80
1.00
6.50
2.54
Note:
All dimensions are in mm.
©2003 Fairchild Semiconductor Corporation
FODM30XX Rev. 1.0.6
www.fairchildsemi.com
10
FODM30XX — 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers
Reflow Profile
Temperature (°C)
TP
260
240
TL
220
200
180
160
140
120
100
80
60
40
20
0
Max. Ramp-up Rate = 3°C/S
Max. Ramp-down Rate = 6°C/S
tP
Tsmax
tL
Preheat Area
Tsmin
ts
120
240
360
Time 25°C to Peak
Time (seconds)
Profile Freature
Pb-Free Assembly Profile
Temperature Min. (Tsmin)
150°C
Temperature Max. (Tsmax)
200°C
Time (tS) from (Tsmin to Tsmax)
60–120 seconds
Ramp-up Rate (tL to tP)
3°C/second max.
Liquidous Temperature (TL)
217°C
Time (tL) Maintained Above (TL)
60–150 seconds
Peak Body Package Temperature
260°C +0°C / –5°C
Time (tP) within 5°C of 260°C
30 seconds
Ramp-down Rate (TP to TL)
6°C/second max.
Time 25°C to Peak Temperature
©2003 Fairchild Semiconductor Corporation
FODM30XX Rev. 1.0.6
8 minutes max.
www.fairchildsemi.com
11
Auto-SPM™
Build it Now™
CorePLUS™
CorePOWER™
CROSSVOLT™
CTL™
Current Transfer Logic™
EcoSPARK®
EfficentMax™
EZSWITCH™*
™*
®
®
Fairchild
Fairchild Semiconductor®
FACT Quiet Series™
FACT®
®
FAST
FastvCore™
FETBench™
FlashWriter®*
FPS™
F-PFS™
FRFET®
SM
Global Power Resource
Green FPS™
Green FPS™ e-Series™
Gmax™
GTO™
IntelliMAX™
ISOPLANAR™
MegaBuck™
MICROCOUPLER™
MicroFET™
MicroPak™
MillerDrive™
MotionMax™
Motion-SPM™
OPTOLOGIC®
OPTOPLANAR®
®
PDP SPM™
Power-SPM™
PowerTrench®
PowerXS™
Programmable Active Droop™
QFET®
QS™
Quiet Series™
RapidConfigure™
™
Saving our world, 1mW/W/kW at a time™
SmartMax™
SMART START™
SPM®
STEALTH™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SupreMOS™
SyncFET™
Sync-Lock™
®
*
The Power Franchise®
TinyBoost™
TinyBuck™
TinyLogic®
TINYOPTO™
TinyPower™
TinyPWM™
TinyWire™
TriFault Detect™
TRUECURRENT™*
µSerDes™
UHC®
Ultra FRFET™
UniFET™
VCX™
VisualMax™
XS™
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR
CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,
WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into the body or (b) support or sustain life,
and (c) whose failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be reasonably
expected to result in a significant injury of the user.
2. A critical component in any component of a life support, device, or
system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its
safety or effectiveness.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts.
Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications,
and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of
counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are
listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have
full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information.
Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide
any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our
customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Advance Information
Formative / In Design
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
Definition
Datasheet contains the design specifications for product development. Specifications may change in
any manner without notice.
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes
at any time without notice to improve the design.
Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I40
©2003 Fairchild Semiconductor Corporation
FODM30XX Rev. 1.0.6
www.fairchildsemi.com
12
FODM30XX — 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.