1.8V~3.3V, Clipped SINE, SMD TCXO/VCTCXO RoHS Compliant / Pb Free Model: FOX923 SERIES Rev. 6/10/2009 Page 1 of 1 http://www.foxonline.com/need_a_sample.htm FEATURES OPTIONS • Supply Voltages of 1.8V ~ 3.3V • 1.2 mm Max Height • Clipped SINE Output • Voltage Control (FOX923E) • Stabilities to 0.5PPM available • PART NUMBER SELECTION Learn More - Internet Required Part Number 673C-Frequency-xxxxx 638C-Frequency-xxxxx 673-Frequency-xxxxx 638-Frequency-xxxxx 673D-Frequency-xxxxx 638D-Frequency-xxxxx 673F-Frequency-xxxxx 638F-Frequency-xxxxx 673G-Frequency-xxxxx 638G-Frequency-xxxxx 673L-Frequency-xxxxx 638L-Frequency-xxxxx Supply Model Number Voltage (Vdd) 3.3V ±5% FOX923C 3.3V ±5% FOX923CE 3.0V ±5% FOX923B 3.0V ±5% FOX923E 2.8V ±5% FOX923D 2.8V ±5% FOX923DE 2.7V ±5% FOX923F 2.7V ±5% FOX923FE 2.5V ±5% FOX923G 2.5V ±5% FOX923GE 1.8V ±5% FOX923L 1.8V ±5% FOX923LE TCXO/ VCTCXO TCXO VCTCXO TCXO VCTCXO TCXO VCTCXO TCXO VCTCXO TCXO VCTCXO TCXO VCTCXO Frequency Range (MHz) 8.000 ~ 52.000 8.000 ~ 52.000 8.000 ~ 52.000 8.000 ~ 52.000 8.000 ~ 52.000 8.000 ~ 52.000 8.000 ~ 52.000 8.000 ~ 52.000 8.000 ~ 52.000 8.000 ~ 52.000 10.000 ~ 52.000 10.000 ~ 52.000 3.2±0.2 #4 #3 Marking Top View #1 #2 Dot deontes pin 1. 1.2 Max 1.95 • ELECTRICAL CHARACTERISTICS PARAMETERS MAX (unless otherwise noted) Frequency Range (Fo) Temperature Range Operating (Topr) Storage (Tstg) Supply Voltage (Vdd) Input Current (Idd) 8.000 ~ 52.000 MHz -30ºC ~ +85ºC -40ºC ~ +85ºC 1.8V ~ 3.3V VDD = 2.5V ~ 3.3V, Fo = 8.000 ~ 52.000MHz 2.0mA VDD = 1.8V, Fo = 10.000 ~ 26.000MHz 1.5mA VDD = 1.8V, Fo = 26.000+ ~ 52.000MHz 2.0mA Initial Frequency Tolerance @ 25ºC (after 2 reflows)1 (VCTCXO: Vc = 0.5Vdd) Frequency Stability Over Temperature Range Over Supply Voltage Change (Vdd ± 5%) Over Load Change (10KΩ//10pF) ±10% Output Waveform (Clipped Sine) Peak-to-Peak Level (Vp-p) Output Load Pullability Vdd = 2.5V~3.3V, Vc = 50% Vdd ±1.0V Vdd = 1.8V, Vc = 0.9V ±0.6V Aging per year Phase Noise (26.000MHz, @ 10kHz offset) Reflow Soldering Temp Moisture Sensitivity Level (MSL) Termination Finish 2.5±0.2 Bottom View #1 #2 #4 #3 0.65 R e co m m e n d e d S o ld e r P a d L a yo u t 1.6 ±1.5 PPM 1.3 ±2.5 PPM ±0.3 PPM ±0.2 PPM 1.3 0.4 0.8V 10KΩ // 10pF ±10% ±5 ~ ±15PPM ±3 ~ ±5PPM ±1.0PPM -145 dBc/Hz Typical 260ºC / 10 Seconds 1 Au All dimensions are in millimeters. Pin Connections TCXO #1 NC #3 Output #2 GND #4 VDD VCTCXO #1Vc #3 Output #2 GND #4 VDD 1 For proper operation, a control Voltage (Vc) must be applied to pin 1 on VCTCXO's. All specifications subject to change without notice. FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554 http://www.foxonline.com EMEA Tel/Fax: +44 .1767.312632 | Asia Hong Kong Tel: +852.2854.4285 Fax +852.2854.4282 | Japan Tel: +81.3.3374.2079 Fax: +81.3.3374.5221 © 2009 FOX ELECTRONICS | ISO9001:2000 Certified