FR101L-FR107L Fast Recovery Rectifiers VOLTAGE RANGE: 50 --- 1000 V CURRENT: 1.0 A Features Low cost Diffused junction Low leakage Low forward voltage drop High current capability Easily cleaned with Freon,Alcohol,Isopropanol and similar solvents The plastic material carries U/L recognition 94V-0 Mechanical Data Case:JEDEC A-405,molded plastic Terminals: Axial lead ,solderable per MIL- STD-202,Method 208 Polarity: Color band denotes cathode Weight: 0.008ounces,0.23 grams Mounting position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single phase,half wave,60 Hz,resistive or inductive load. For capacitive load,derate by 20%. FR 101L FR 102L FR 103L FR 104L FR 105L FR 106L FR 107L UNITS Maximum recurrent peak reverse voltage V RRM 50 100 200 400 600 800 1000 V Maximum RMS voltage V RMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forw ard rectified current 9.5mm lead length, @TA=75 IF(AV) 1.0 A IFSM 30.0 A VF 1.3 V Peak forw ard surge current 8.3ms single half-sine-w ave superimposed on rated load @TJ =125 Maximum instantaneous forw ard voltage @ 1.0 A Maximum reverse current at rated DC blocking voltage @TA =25 5.0 IR @TA =100 150 250 Maximum reverse recovery time (Note1) t rr Typical junction capacitance (Note2) CJ 12 Typical thermal resistance (Note3) RθJA 55 TJ - 55---- + 150 TSTG - 55---- + 150 Operating junction temperature range Storage temperature range A 100.0 500 ns pF ／Ｗ NOTE:1. Measured with I F =0.5A, I R=1A, I rr=0.25A. 2. Measured at 1.0MHz and applied rev erse v oltage of 4.0V DC. 3. Thermal resistance f rom junction to ambient. ht t p : // Revision:20170701-P1 www.lgesemi .c o m mail:[email protected] FR101L-FR107L Fast Recovery Rectifiers Ratings AND Charactieristic Curves FIG.1 -- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM trr 50 N.1. 10 N.1. +0.5A D.U.T. ( - ) PULSE GENERATOR (NOTE2) (+) 50VDC (APPROX) (-) OSCILLOSCOPE (NOTE 1) 1 N.1. 0 -0.25A ( + ) -1.0A 1cm NOTES:1.RISETIME=7ns MAX. INPUT IMPEDANCE=1M .22pF 2.RISETIME=10ns MAX. SOURCEIMPEDANCE=5O SET TIMEBASEFOR 50/100 ns /cm FIG.3 -- FORWARD DERATING CURVE AVERAGE FORWARD RECTIFIED CURRENT AMPERES INSTANTANEOUS FORWARD CURRENT AMPERES FIG.2 --TYPICAL FORWARD CHARACTERISTIC 100 10 TJ=25 Pulse Width=300µS 4 2 1. 0 0. 4 0. 2 0. 1 0 .06 0 .02 0 .01 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 1.0 Single Phase Half Wave 60HZ Resistive or Inductive Load .8 .6 .4 .2 0 50 25 INSTANTANEOUS FORWARD VOLTAGE,VOLTS 14 12 10 TJ=25 f=1MHz 2 .4 1.0 2 4 10 20 REVERSE VOLTAGE,VOLTS ht t p : // Revision:20170701-P1 40 100 PEAK FORWARD SURGE CURRENT AMPERES JUNCTION CAPACITANCE,pF 16 .2 125 175 150 200 FIG.5--PEAK FORWARD SURGE CURRENT 10 1 .1 100 AMBIENT TEMPERATURE, FIG.4--TYPICAL JUNCTION CAPACITANCE 4 75 30 20 TJ=125 8.3msSingleHalf Sine-Wave 10 0 1 100 10 NUMBER OF CYCLES AT 60 Hz www.lgesemi .c o m mail:[email protected]