1.0 Amp FAST RECOVERY PLASTIC RECTIFIERS Data Sheet Mechanical Dimensions .034(.86) Description .028(.71) DIA. 1.0(25.4) FR10~110G MIN. .205(5.2) .160(4.1) .107(2.7) .080(2.0) 1.0(25.4) DIA. MIN. DO-41 Dimensions in inches and (millimeters) Mechanical Data Features ¬ Fast switching for high efficiency ¬ Low forward voltage drop ¬ High current capability ¬ Low reverse leakage current ¬ High surge current capability ¬ Weight: 0.34 gram ¬ Case: Molded plastic DO-41 ¬ Epoxy: UL 94V-0 rate flame retardant ¬ Terminals: Solderable per MIL-STD-202 method 208 ¬ Polarity:Color band denotes cathode Mounting position: Any ¬ MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. SYMBOL FR 10G FR 11G FR 12G FR 14G FR 16G FR 18G Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC Blocking Voltage Maximum Average Forward Rectified o Current TL=55 C FR UNIT 110G IF(AV) 1.0 A IFSM 30 A VF 1.3 V 5.0 uA 100 uA Peak Forward Surge Current, 8.3ms single Half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage @ 1.0 A o Maximum DC Reverse Current @TJ=25 C o At Rated DC Blocking Voltage @TJ=125 C IR Maximum Reverse Recovery Time (Note 1) Trr Typical junction Capacitance (Note 2) CJ Typical Thermal Resistance (Note 3) Operating Junction and Storage Temperature Range 250 150 pF 15 R JA 75 TJ, TSTG -55 to + 150 NOTES : (1) Reverse recovery test conditions IF = 0.5A, IR = 1.0A, Irr = 0.25A. (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC. (3) Thermal Resistance junction to lead. nS 500 o CW o C 1.0 Amp FAST RECOVERY PLASTIC RECTIFIERS Data Sheet RATINGS AND CHARACTERISTIC CURVES FR10G THRU FR110G FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.1 - FORWARD CURRENT DERATING CURVE 30 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 1.0 0.8 0.6 0.4 0.2 60 Hz Resistive or Inductive load 0 Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) 25 20 15 10 5 0 0 50 100 150 1 LEAD TEMPERATURE, C FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 FIG.4 - TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 1000 1.0 0.1 o TJ=25 C PULSE WIDTH=300uS 1% DUTY CYCLE 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 100 o TJ=125 C 10 o 1 TJ=25 C 0.1 1.6 0 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 100 o TJ = 25 C f = 1.0 MHZ Vsig = 50mVp-p 10 1 0.1 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF IINSTANTANEOUS FORWARD CURRENT, AMPERES 10 NUMBER OF CYCLES AT 60Hz o 1.0 4.0 10 REVERSE VOLTAGE, VOLTS 100