1.0 Amp FAST RECOVERY PLASTIC RECTIFIERS Data Sheet Mechanical Dimensions FR10 . . . 110 Series Description JEDEC D0-41 .205 .160 1.00 Min. .080 .107 .031 typ. Features n FAST SWITCHING FOR HIGH EFFICIENCY n 1.0 AMP OPERATION @ TA = 55°C, WITH NO THERMAL RUNAWAY n HIGH SURGE CAPABILITY n MEETS UL SPECIFICATION 94V-0 Units FR10 . . . 110 Series FR10 FR11 FR12 FR14 FR16 FR18 FR110 Peak Repetitive Reverse Voltage...VRRM 50 100 200 400 600 800 1000 Volts RMS Reverse Voltage...VR(rms) 35 70 140 280 420 560 700 Volts DC Blocking Voltage...VDC 50 100 200 400 600 800 1000 Volts Maximum Ratings Average Forward Rectified Current...IF(av) TA = 55°C ............................................. 1.0 ............................................... Amps Non-Repetitive Peak Forward Surge Current...IFSM @ Rated Current & Temp ............................................. 5 0 ............................................... Amps Operating & Storage Temperature Range...TJ, TSTRG ........................................ -65 to 150 ......................................... °C ............................................. 1.3 ............................................... Volts Electrical Characteristics Maximum Forward Voltage @ 1.0A...VF Maximum DC Reverse Current...IR @ Rated DC Blocking Voltage @ @ Typical Junction Capacitance...CJ (Note 1) Maximum Reverse Recovery Time...tRR Page 4-6 25°C 100°C ............................................. 5.0 ............................................... µAmps ............................................. 100 ............................................... µAmps ............................................. 1 5 ............................................... 150 150 150 150 250 500 500 pF ns Peak Forward Surge Current (A) Average Forward Current (A) Forward Current Derating Curve 1.5 Non-Repetitive Peak Forward Surge Current 100 1.0 .5 0 25 50 75 100 125 150 175 Ambient Temperature (°° C) 10 1 10 1 Typical Instantaneous Forward Characteristics 100 1 .1 .01 .6 TJ = 25°C .8 1.0 1.2 Forward Voltage (V) (+) 25 VDC (-) D.U.T 1Ω NonInductive 10Ω Ω (-) Pulse Generator Note 2 Oscilliscope Note 1 Notes: 1. Rise Time = 7 ns Max. Impedance = 1 megohm, 22 pF 2. Rise Time = 10 ns Max. Source Impedance = 50 Ohms 50 TJ = 25°C 10 1 1.4 Non-Inductive 50Ω Ω 1000 Typical Junction Capacitance Junction Capacitance (pF) Forward Current (A) 10 100 Number of Cycles @ 60 Hz FR10 . . . 110 Series 1.0 Amp FAST RECOVERY PLASTIC RECTIFIERS Data Sheet (+) .1 1 10 100 Reverse Voltage (V) +.5A Reverse Recovery Characteristics tRR -.25A Ratings at 25 Deg. C ambient temperature unless otherwise specified. -1.0A Single Phase Half Wave, 60 Hz Resistive or Inductive Load. 0A 1 cm Time Base Set @ 50/100ns/cm NOTES: 1. Measured @ 1 MHz and applied reverse voltage of 4.0V. 2. Thermal Resistance Junction to Ambient, Jedec Method. For Capacitive Load, Derate Current by 20%. Page 4-7