MCC
TM
Micro Commercial Components
FR3AB
THRU
FR3MB
omponents
20736 Marilla Street Chatsworth
!"#
$ % !"#
Features
•
•
•
•
•
•
•
Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates
Compliant. See ordering information)
Epoxy meets UL 94 V-0 flammability rating
Moisture Sensitivity Level 1
Easy Pick And Place
High Temp Soldering: 260°C for 10 Seconds At Terminals
Fast Recovery Times For High Effieciency
Halogen free available upon request by adding suffix "-HF"
3 Amp Fast Recovery
Silicon Rectifier
50 to 1000 Volts
DO-214AA
(SMB) (LEAD FRAME)
Maximum Ratings
•
•
•
Operating Temperature: -55°C to +150°C
Storage Temperature: -55°C to +150°C
A
Typical Thermal Resistance; 9°C/W Junction To Case
MCC
Catalog
Number
FR3AB
FR3BB
FR3DB
FR3GB
FR3JB
FR3KB
FR3MB
Device
Marking
FR3AB
FR3BB
FR3DB
FR3GB
FR3JB
FR3KB
FR3MB
Maximum
Recurrent
Peak Reverse
Voltage
50V
100V
200V
400V
600V
800V
1000V
Maximum
RMS
Voltage
35V
70V
140V
280V
420V
560V
700V
Maximum
DC
Blocking
Voltage
50V
100V
200V
400V
600V
800V
1000V
B
C
F
D
G
E
Electrical Characteristics @ 25°C Unless Otherwise Specified
Average Forward
IF(AV)
3.0A
TC = 115°C
Current
Peak Forward Surge
IFSM
100A
8.3ms, half sine
Current
Maximum
1.30V
IFM = 3.0A;
Instantaneous
VF
Forward Voltage
TJ = 25°C*
Maximum DC
Reverse Current At
IR
10µA
TJ = 25°C
Rated DC Blocking
250µA TJ = 100°C
Voltage
Maximum Reverse
Recovery Time
150ns IF=0.5A, IR=1.0A,
FR3AB-GB
Trr
250ns Irr=0.25A
FR3JB
500ns
FR3KB-MB
Typical Junction
CJ
80pF
Measured at
Capacitance
1.0MHz, VR=4.0V
*Pulse test: Pulse width 200 µsec, Duty cycle 2%
Note:
H
DIMENSIONS
DIM
A
B
C
D
E
F
G
H
INCHES
MIN
.160
.130
.006
.030
.200
.079
.075
.002
MM
MIN
4.06
3.30
0.15
0.76
5.08
2.01
1.91
0.05
MAX
.185
.155
.012
.060
.220
.103
.087
.008
MAX
4.70
3.94
0.31
1..52
5.59
2.62
2.21
0.203
NOTE
SUGGESTED SOLDER
PAD LAYOUT
0.106
0.083”
0.050”
1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7.
www.mccsemi.com
Revision: C
1 of 4
2017/03/28
MCC
FR3AB thru FR3MB
TM
Micro Commercial Components
Figure 2
Typical Reverse Characteristics
Figure 1
Typical Forward Characteristics
100
1000
60
600
40
400
20
200
10
100
6
60
4
40
25°C
2
20
Amps
1
10
.6
6
.4
4
.2
2
.1
1
.06
.6
.04
.4
.02
.01
TA=100°C
µAmps
TA=75°C
TA=25°C
.2
.4
.6
.8
1.0
1.2
1.4
.1
1.6
Volts
20
40
60
80
100
120
140
Volts
Instantaneous Forward Current - Amperes versus
Instantaneous Reverse Leakage Current - MicroAmperes versus
Instantaneous Forward Voltage - Volts
Percent Of Rated Peak Reverse Voltage - Volts
www.mccsemi.com
Revision: C
3 of 4
2017/03/28
MCC
FR3AB thru FR3MB
Micro Commercial Components
Figure 4
Forward Derating Curve
Figure 3
Peak Forward Surge Current
150
3.0
125
2.5
100
2.0
75
Amps
50
1.5
Amps
25
1.0
0
1
4
2
6
8 10
20
40
60 80 100
.5
Cycles
Single Phase, Half Wave
60Hz Resistive or Inductive Load
Peak Forward Surge Current - Amperes versus
Number Of Cycles At 60Hz - Cycles
0
40
60
80
100
120
140
160
°C
Average Forward Rectified Current - Amperes versus
Case Temperature - °C
Figure 5
Reverse Recovery Time Characteristic And Test Circuit Diagram
50Ω
10Ω
Pulse
Generator
Note 2
25Vdc
1Ω
trr
+0.5A
0
Oscilloscope
Note 1
-0.25
Notes:
1. Rise Time = 7ns max.
Input impedance = 1 megohm, 22pF
2. Rise Time = 10ns max.
Source impedance = 50 ohms
3. Resistors are non-inductive
-1.0
1cm
Set Time Base for 20/100ns/cm
www.mccsemi.com
Revision: C
3 of 4
2017/03/28
TM
MCC
TM
Micro Commercial Components
Ordering Information :
Device
Packing
Part Number-TP
Tape&Reel: 3Kpcs/Reel
Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF
***IMPORTANT NOTICE***
Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to
make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components
Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it
convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all
risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are
represented on our website, harmless against all damages.
***LIFE SUPPORT***
MCC's products are not authorized for use as critical components in life support devices or systems without the express written
approval of Micro Commercial Components Corporation.
***CUSTOMER AWARENESS***
Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking
strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages
customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on
our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine
parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty
coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized
distributors.
www.mccsemi.com
Revision: C
4 of 4
2017/03/28