5.0 Amp FAST RECOVERY Data Sheet PLASTIC RECTIFIERS Mechanical Dimensions .185(4.70) .175(4.44) MAX.412(10.5) DIA .140(3.56) .130(3.30) FRF50~510G .113(2.87) .103(2.62) 1 2 .594(15.1) .587(14.9) PIN 2 1 MAX.0.05(1.5) .16(4.06) .14(3.56) .037(0.94) .027(0.68) 1.25(3.18) 1.15(2.92) .27(6.86) .23(5.84) Description .56(14.22) .53(13.46) .11(2.79) .10(2.54) .025(0.64) .014(0.35) .205(5.20) .195(4.95) ITO-220AC Dimensions in inches and (millimeters) Features ¬ Fast switching for high efficiency ¬ Low forward voltage drop ¬ High current capability ¬ Low reverse leakage current ¬ High surge current capability ¬ Mechanical Data ¬ Case: Molded plastic ITO-220AC ¬ Epoxy: UL 94V-0 rate flame retardant ¬ Terminals: Solderable per MIL-STD-202 method 208 ¬ Polarity:Color band denotes cathode ¬ Mounting position: Any Weight: 2.1 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. SYMBOL FRF 50G FRF 51G FRF 52G FRF 54G FRF 56G FRF 58G FRF UNIT 510G Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC Blocking Voltage Maximum Average Forward Rectified Current o TL=55 C IF(AV) 5.0 A IFSM 250 A VF 1.3 V 5.0 uA 200 uA Peak Forward Surge Current, 8.3ms single Half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage @ 6.0 A o Maximum DC Reverse Current @TJ=25 C o At Rated DC Blocking Voltage @TJ=125 C IR Maximum Reverse Recovery Time (Note 1) Trr Typical junction Capacitance (Note 2) CJ Typical Thermal Resistance (Note 3) Operating Junction and Storage Temperature Range R JC/A TJ, TSTG NOTES : (1) Reverse recovery test conditions IF = 0.5A, IR = 1.0A, Irr = 0.25A. (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC. (3) Thermal Resistance junction to lead. 250 150 nS 500 pF 80 5.0/55 -55 to +150 o CW o C 5.0 Amp FAST RECOVERY PLASTIC RECTIFIERS Data Sheet RATINGS AND CHARACTERISTIC CURVES FRF50G THRU FRF510G FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.1 - FORWARD CURRENT DERATING CURVE 300 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 6.0 5.0 4.0 3.0 2.0 1.0 60 Hz Resistive or Inductive load 0 Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) 250 200 150 100 50 0 0 50 100 150 1 LEAD TEMPERATURE, C FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 FIG.4 - TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 1000 1.0 0.1 o TJ=25 C PULSE WIDTH=300uS 1% DUTY CYCLE 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 o 100 TJ=125 C 10 o TJ=25 C 1 0.1 1.6 0 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 1000 o TJ = 25 C f = 1.0 MHZ Vsig = 50mVp-p 100 10 0.1 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF IINSTANTANEOUS FORWARD CURRENT, AMPERES 10 NUMBER OF CYCLES AT 60Hz o 1.0 4.0 10 REVERSE VOLTAGE, VOLTS 100