SPI FSP460-60GHC 460 watts atx12v switching power supply Datasheet

Sparkle Power Inc.
A Leading Power Supply Manufacturer
Web site: www.sparklepower.com
FSP460-60GHC
(80PLUS, RoHS Compliant)
460 Watts ATX+12V Switching Power Supply
Features
•
Complied with ATX12V standard
•
Active Power Factor Correction (PFC) meet EN61000-3-2
•
High efficiency and reliability
•
Compatible with European Union Directive 2002/95/EC
(Restriction on Hazardous Substances).
Specification
•
Temperature Range: Operating: +10°C ~ +50°C ; storage
& shipping: -20°C ~ +80°C
•
Remote ON/OFF function
•
Internal 12V DC fan included
•
Humidity: 5-95% RH on operating, 5-95%RH on storage
•
Noise Killer (thermal fan speed control function)
•
Dielectric Withstand: Primary frame ground 1800V AC for
•
Low noise and ripple
•
Output over voltage, short circuit, and over current protection
•
Efficiency: 80% minimum, typical up to 82%
•
100% Hi-pot, ATE, and burn-in tested
•
Rise time: Less than 20ms
•
Re-settable power shut down
•
Hold-up Time: 17ms minimum at nominal input voltage
•
Complies with FCC part 15 subpart J class B 115Vac operation,
•
Power Good Signal: Power on delay time 100 ~ 500ms, off
1 second
delay 1ms minimum (TTL and CMOS compatible)
and CISPR 22 class B at 230Vac operation
•
Approved by CUL/UL60950-1, CSA, TUV EN60950-1, CB report
(60950-1),NEMKO,FCC,EMC
•
Leakage Current: Less than 3.5mA at 264Vac, 50Hz
•
MTBF: 100,000 hours on maximum load at +25°C
•
Dimensions (LxWxH): 140x150x86mm / 5.5x5.9x3.4inch
Input Characteristics
Input Range: 90 ~ 265Vac (RMS), Full Range Input
Frequency: 47 ~ 63Hz
Input Current: Max 5.5A (RMS) @ 115Vac, 3.0A (RMS) @ 230Vac
Inrush Current: No damage
Output Characteristics
Output Voltage
Minimum Load
Normal Load
Maximum Load
Load Reg.
0.1A
12A
24A
± 5%
+3.3V
0.2A
12A
24A
± 5%
+5V
0.1A
8.5A
17A
± 5%
+12V1
0.5A
8.5A
17A (19A Peak)
± 5%
+12V2
0.25A
0.0A
0.5A
± 10%
-12V
0A
1.25A
2.5A (3.5A Peak)
± 5%
+5Vsb
* +3.3V and +5V total output not exceed 123W
* Maximum combined current for the +12V outputs shall be 34A
* +12V2 Peak current is 19A (less than 10m Sec.), minimum voltage during peak is >11.0Vdc.
* +5Vsb Peak current is 3.5A (less than 500m Sec.) , minimum voltage during peak is > 4.5Vdc.
Sparkle Power Inc.
Main Office
1000 Rock Avenue
San Jose, CA 95131
TEL: 408-519-8888
FAX: 408-519-9999
E-MAIL: [email protected]
Line Reg.
± 1%
± 1%
± 1%
± 1%
± 1%
± 1%
Ripple & Noise
50mV P-P
50mV P-P
120mV P-P
120mV P-P
120mV P-P
50mV P-P
Sparkle Power Inc.
Los Angeles Office
17071 Green Drive
City of Industry, CA 91745
TEL: 626-839-7180
FAX: 626-839-3395
Similar pages