FTD8004 Ordering number : ENN7753 FTD8004 N-Channel Silicon MOSFET General-Purpose Switching Device Applications Features • • • • Low ON-resistance. 2.5V drive. Mounting height 1.1mm. Best suited for switching of lithium-ion battery with drain common. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Drain-to-Source Voltage VDSS 20 Gate-to-Source Voltage VGSS ±12 V 8 A Drain Current (DC) ID Drain Current (Pulse) V IDP PD PW≤10µs, duty cycle≤1% 40 A Mounted on a ceramic board (1000mm2✕0.8mm)1unit 1.4 W PT Tch Mounted on a ceramic board (1000mm2✕0.8mm) Channel Temperature Storage Temperature Tstg Allowable Power Dissipation Total Dissipation 1.45 W 150 °C --55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Symbol Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance V(BR)DSS IDSS IGSS Conditions ID=1mA, VGS=0 VDS=20V, VGS=0 VGS(off) yfs VGS= ±8V, VDS=0 VDS=10V, ID=1mA VDS=10V, ID=8A RDS(on)1 RDS(on)2 RDS(on)3 RDS(on)4 Ratings min typ Unit max 20 V 1 ±10 0.5 1.3 µA µA V 12 20 ID=8A, VGS=4.5V ID=6A, VGS=4V 6 12 16 mΩ 7 13 18 mΩ ID=4A, VGS=3.1V ID=4A, VGS=2.5V 8 14 20 mΩ 9 16 23 mΩ Marking : D8004 S Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 73004PA TS IM TA-100773 No.7753-1/4 FTD8004 Continued from preceding page. Parameter Symbol Ratings Conditions min typ Unit max Input Capacitance Ciss pF Coss VDS=10V, f=1MHz VDS=10V, f=1MHz 2400 Output Capacitance 445 pF Reverse Transfer Capacitance Crss VDS=10V, f=1MHz 435 pF Turn-ON Delay Time td(on) See specified Test Circuit. 30 ns Rise Time tr td(off) See specified Test Circuit. 360 ns See specified Test Circuit. 165 ns tf See specified Test Circuit. 240 ns Total Gate Charge Qg VDS=10V, VGS=4V, ID=8A 28 nC Gate-to-Source Charge Qgs VDS=10V, VGS=4V, ID=8A 3.5 nC Gate-to-Drain “Miller” Charge Qgd VDS=10V, VGS=4V, ID=8A Diode Forward Voltage VSD IS=8A, VGS=0 Turn-OFF Delay Time Fall Time 10 0.82 nC 1.2 V Package Dimensions unit : mm 2231 0.425 5 0.5 8 0.95 3.0 0.65 4.5 6.4 1 : Drain 2 : Source1 3 : Source1 4 : Gate1 5 : Gate2 6 : Source2 7 : Source2 8 : Drain 4 0.125 (0.95) 1 1.0 0.25 0.1 SANYO : TSSOP8 Switching Time Test Circuit Electrical Connection VDD=10V VIN D S2 S2 G2 4V 0V ID=8A RL=12.5Ω VIN D VOUT PW=10µs D.C.≤1% G FTD8004 P.G 50Ω D S1 S1 G1 S No.7753-2/4 FTD8004 ID -- VDS 8 ID -- VGS 12 V 10 4 3 2 8 6 4 2 1 --25° C 5V 1. Ta= 75°C 25°C Drain Current, ID -- A 5 2.0 4.0 V 6 4.5V Drain Current, ID -- A 7 3.0 V 2.5 V VDS=10V VGS=1.0V 0 0 0.10 0.15 0.20 0.25 0.30 0.35 Drain-to-Source Voltage, VDS -- V 0 6A 40 4A 35 30 25 20 15 10 5 2 4 6 8 10 Gate-to-Source Voltage, VGS -- V 25 °C C 5° --2 = °C Ta 75 3 2 25 1.0 7 5 1.4 1.6 3 1.8 2.0 IT07083 V =3.1 , VGS A 4 I D= =2.5V VGS , A 4 I D= 20 15 =4V =4.5V , VGS A S 6 V , G = A ID I D=8 10 5 --50 --25 0 25 50 75 100 125 150 175 IT07085 IF -- VSD 10 7 5 Forward Current, IF -- A Forward Transfer Admittance, yfs -- S 10 7 5 1.2 Ambient Temperature, Ta -- °C 2 VGS=0 3 2 1.0 7 5 3 2 0.1 7 5 3 2 2 0.1 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Drain Current, ID -- A 0.01 0.2 5 7 10 IT07086 SW Time -- ID 3 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Diode Forward Voltage, VSD -- V 1.0 1.1 IT07087 Ciss, Coss, Crss -- VDS 10000 VDD=10V VGS=4V 2 f=1MHz 7 5 1000 7 5 Ciss, Coss, Crss -- pF Switching Time, SW Time -- ns 12 VDS=10V 3 1.0 30 IT07084 yfs -- ID 5 0.8 RDS(on) -- Ta 0 --75 0 0 0.6 35 Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ 45 0.4 Gate-to-Source Voltage, VGS -- V Ta=25°C ID=8A 0.2 IT07082 RDS(on) -- VGS 50 Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ 0.40 5°C 25° C --25 °C 0.05 Ta= 7 0 td (off) 3 2 tf tr 100 7 5 td(on) 3 Ciss 2 1000 7 Coss 5 Crss 3 2 2 10 0.01 3 100 2 3 5 7 0.1 2 3 5 7 1.0 Drain Current, ID -- A 2 3 5 7 10 IT07088 0 2 4 6 8 10 12 14 16 Drain-to-Source Voltage, VDS -- V 18 20 IT07089 No.7753-3/4 FTD8004 VGS -- Qg 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 5 0 10 15 20 25 Total Gate Charge, Qg -- nC To ta lD 0.8 iss 1u nit ipa tio n 0.4 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 10 m 140 160 IT07092 s 10 0m s 1.0 7 5 3 2 Operation in this area is limited by RDS(on). 0.1 7 5 3 2 DC operation (Ta=25°C) Ta=25°C Single pulse Mounted on a ceramic board (1000mm2✕0.8mm) 1unit 2 3 5 7 0.1 2 3 5 7 1.0 2 3 2 3 5 7 10 Drain-to-Source Voltage, VDS -- V Allowable Power Dissipation(FET1), PD -- W Allowable Power Dissipation, PD -- W 1.2 <10µs 10 0µ s 1m s ID=8A 10 7 5 3 2 IT07090 Mounted on a ceramic board (1000mm2✕0.8mm) 1.45 1.40 IDP=40A 0.01 0.01 30 PD -- Ta 1.6 ASO 100 7 5 3 2 VDS=10V ID=8A Drain Current, ID -- A Gate-to-Source Voltage, VGS -- V 4.0 5 IT07091 PD -- PD 1.6 1.4 M 1.2 ou nte do na 1.0 ce ram ic 0.8 bo ard (10 0.6 00 mm 0.4 2 ✕0 .8m m) 0.2 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Allowable Power Dissipation(FET2), PD -- W IT07093 Note on usage : Since the FTD8004 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of July, 2004. Specifications and information herein are subject to change without notice. PS No.7753-4/4