Frontier FUF4007 1a ultra fast recovery rectifier Datasheet

Frontier Electronics Corp.
667 E. COCHRAN STREET, SIMI VALLEY, CA 93065
TEL: (805) 522-9998
FAX: (805) 522-9989
E-mail: [email protected]
Web: http://www.frontierusa.com
1A ULTRA FAST RECOVERY RECTIFIER
FUF4001 THRU FUF4007
FEATURES
z PLASTIC PACKAGE HAS UNDERWRITERS LABORATORY
FLAMMABILITY CLASSIFICATION 94V-0
z ULTRA FAST RECOVERY TIMES FOR HIGH EFFICIENCY
z LOW FORWARD VOLTAGE, HIGH CURRENT CAPABILITY
z LOW LEAKAGE
z HIGH SURGE CAPABILITY
z HIGH TEMPERATURE SOLDERING GUARANTEED:
260°C 0.375” (9.5mm) LEAD LENGTHS FOR 10 SECONDS AT
5 LBS.(2.3KG)TENSION
1.0(25.4)
MIN
.034(0.9)
.028(0.7)
.205(5.2)
.166(4.2)
.107(2.7)
.080(2.0)
MECHANICAL DATA
z CASE: MOLDED PLASTIC, DO41, DIMENSIONS
IN INCHES AND (MILLIMETERS)
z TERMINALS: AXIAL LEADS SOLDERABLE PER MIL-STD202, METHOD 208
z POLARITY: COLOR BAND DENOTES CATHODE END
z MOUNTING POSITION: ANY
z WEIGHT: 0.34 GRAMS
1.0(25.4)
MIN
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED SINGLE
PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20%
RATINGS
SYMBOL FUF4001 FUF4002 FUF4003 FUF4004 FUF4005 FUF4006 FUF4007 UNITS
MAXIMUM RECURRENT PEAK REVERSE VOLTAGE
MAXIMUM RMS VOLTAGE
MAXIMUM DC BLOCKING VOLTAGE
MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT
0.375”(9.5mm) LEAD LENGTH AT TA=55°C
PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF
SINE-WAVE SUPERIMPOSED ON RATED LOAD
TYPICAL JUNCTION CAPACITANCE (NOTE 1)
VRRM
VRMS
VDC
50
35
50
100
70
100
200
140
200
400
280
400
600
420
600
800
560
800
1000
700
1000
V
V
V
TYPICAL THERMAL RESISTANCE (NOTE 2)
Rθja
50
℃/W
STORAGE TEMPERATURE RANGE
TSTG
- 55 TO + 150
℃
OPERATING TEMPERATURE RANGE
TOP
- 55 TO + 150
℃
IO
1.0
A
IFSM
30
A
CJ
20
15
PF
ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED)
CHARACTERISTICS
SYMBOL FUF4001 FUF4002 FUF4003 FUF4004 FUF4005 FUF4006 FUF4007 UNITS
MAXIMUM FORWARD VOLTAGE AT IO DC
VF
1.3
MAXIMUM DC REVERSE CURRENT AT TA=25°C
IR
5
MAXIMUM DC REVERSE CURRENT AT TA=100°C
IR
50
MAXIMUM REVERSE RECOVERY TIME (NOTE 3)
TRR
50
NOTE: 1. MEASURED AT 1 MHZ AND APPLIED REVERSE VOLTAGE 0F 4.0 VOLTS
2. BOTH LEADS ATTACHED TO HEAT SINK 20x20x1t(mm) COPPER PLATE AT LEAD LENGTH 5mm
3. REVERSE RECOVERY TEST CONDITIONS: IF=0.5A, IR=1.0A, IRR=0.25A
FUF4001 THRU FUF4007
1.7
75
Page: 1
V
μA
μA
nS
RATINGS AND CHARACTERISTIC CURVE FUF4001 THRU FUF4007
FIG. 1-TEST CIRCUIT DIAGRAM AND REVERSE
RECOVERY TIME CHARACTERISTIC
FIG. 2-TYPICAL FORWARD
CURRENT DERATING CURVE
Trr
10Ω
NO INDUCTIVE
50Ω
NO INDUCTIVE
+0.5A
AVERAGE FORWARD
CURRENT (A)
2.0
(-)
D.U.T.
(+)
25 Vdc
(approx)
(-)
0
PULSE
GENERATOR
( NOTE 2 )
1Ω
NON
INDUCTIVE
OSCILLOSCOPE
( NOTE 1 )
-0.25A
(+)
-1.0A
100
TJ=125oC
TJ=80oC
1
TJ=25oC
0.1
40
60
80
100
120 140
INSTANTANEOUS FORWARD CURRENT (A)
INSTANTANEOUS REVERSE CURRENT (uA)
1000
20
0
FIG. 4-TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
FIG. 3-TYPICAL REVERSE CHARACTERISTICS
10
1.0
25 50 75 100 125 150 175
AMBIENT TEMPERATURE (oC)
1cm
SET TIME BASE
FOR 10/20 ns/cm
NOTE: 1. RISE TIME=7ns MAX. INPUT
IMPEDANCE=1 MOhms 22PF
2. RISE TIME =10ns MAX. SOURCE
IMPEDANCE=50 OHMS
Single Phase Half
Wave 60 Hz
Resistive or
Inductive Load
100
10
FUF4001~4004
1
.1
FUF4005~4007
.01
.2 .4 .6
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
.8 1.0 1.2 1.4 1.6 1.8 2.0
INSTANTANEOUS FORWARD VOLTAGE (V)
FIG. 5-MAXIMUN NON-REPETITIVE
FORWARD SURGE CURRENT
FIG. 6-TYPICAL JUNCTION CAPACITANCE
200
8.3 ms Single Half Sine Wave
(JEDEC Method)
40
JUNCTION CAPACITANCE (pF)
PEAK FORWARD SURGE CURRENT (A)
50
30
20
10
TJ=25oC
100
FUF4001~4004
40
20
10
6
4
FUF4005~4007
2
1
0
0
1 2
4 6
10
20
40 60
NUMBER OF CYCLES AT 60 Hz
FUF4001 THRU FUF4007
100
.1 .2
.4
1.0 2
4
10 20 40
REVERSE VOLTAGE (V)
Page: 2
100
Similar pages