10+Gbps 0.5mm pitch Stacking Connectors FX10 Series Electrical Interface for the OIF 100G Long-Haul DWDM Transmission Module (MSA-100GLH) ■Mechanical Features ● 0.5mm Pitch ● Stacking Height : 4 ~ 8mm ● Number of Contacts With ground plate type : 80 / 100 / 120 / 140 Without ground plate type : 96 / 120 / 144 / 168 ● Improved Transmission Efficiency Between Boards Transmission characteristics have been improved through a design that fixes ground plates to both sides of the header and receptacle. ■With GND Plate Type ● 10 Signal:1 Ground Arrangement Signal and ground are arranged in a ratio of 10:1 with the ground plate SMT connected to the board. The ground stability achieved serves to reduce noise. Ground plate ● Metal Fittings for Added Solder Weld Strength Signal contact Housing Metal fittings provide greater adhesion to the board, protecting against peeling. The unique connector design provides a connection between the fitting and the ground plate for a stronger ground. m 5m 0.7 Metal fitting Ground plate and metal fitting make contact mm 0.5 m 5m 0.7 ● Suited to High-Density Applications The signal contact pitch of 0.5 mm produces a smaller connector utilizing less board area for mounting. ●Cut Section ● High contact reliability Effective mating length is 1.1 mm for signal contacts. ● Optional Ground Plate An alternate style without the ground plate is available. The space provided by the ground plate removal has been filled with additional signal contacts. ■Signal Integrity Features ●Differential Impedance The differential impedance is within 100 +/- 10 ohms at 30ps rise time (20% to 80%). 60 115 50 110 40 105 Z (Ohm) The insertion-loss-to-crosstalk-ratio (ICR) with fiveaggressor differential FEXT meets the extrapolated IEEE 802.3ap specification for 10+Gbps. ICR (dB) ●Insertion-Loss-to-Crosstalk-Ratio(ICR) 30 100 20 95 10 0 ICR ICR spec 0 2 90 S(3,3) 4 6 Frequency (GHz) 8 85 10 0 200 400 600 Time (ps) 800 1000 ■Stack Height ●With ground plate FX10#-*S/*-SV FX10#-*P/*-SV FX10#–*P/*–SV1 4mm 5mm ( ) Headers Receptacles ●Without ground plate Headers Receptacles FX10#-*S-SV FX10#-*P-SV FX10–*P–SV1 FX10#-168P-SV2 FX10#-168P-SV3 FX10#-168P-SV4 4mm 5mm 6mm 7mm 8mm (H):Reference dimension 2011.01w 1 FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors MSA-100GLH Electrical Interface ■Product Specifications (Rating) Rating Rated current Note 1 Operating temperature range -55 to 85ç Storage temperature range -40 to +60ç (Note 2) Operating humidity range Relative humidity 95% max (No condensation) Storage humidity range 40 to 70% (Note 2) Rated voltage 50 V AC Note 1: Refer to FX10-168pin derating curves from test reports TR570E-20587. Note 2: The term storage refers to an unused products prior to board mounting (including packing materials) that is being kept for a long period. The operating temperature and humidity range are suited to the non-conducting condition following board assembly. Note 3: Other information are shown in General Product Specifications. ■Receptacles without ground plate Unit: mm 41.5±0.2 (P=0.5) No.a2 A 140 No.b1 No.b2 No.b83 No.b84 49.1±0.3 (0.6) 3.2±0.3 7.3±0.3 7.1±0.2 2.5±0.2 No.a1 0.2±0.05 No.a84 No.a83 Guidepost 44.4±0.1 CL No. Number of Contacts Signal Remarks 570-0244-7-** 570-0254-0-** 168 With guideposts Without guideposts Part No. FX10A-168S-SV (**) FX10B-168S-SV (**) (Ø1) (Ø1) [Specifications number] -✽ ✽, (✽ ✽) (83): Embossed tape packaging / AuP 0.76µm (93): Tray packaging / AuP 0.76µm Note 1: There is no polarity in terms of board mounting for this product. Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less. Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.) Note 4: Using multiple connectors between identical boards is not recommended. ■Recommended Land Pattern Dimensions(Metal Mask Dimensions) ■Board-to-Board Distance HEADER CONNECTOR FX10A(B)-168P-SV*(83) SOLDER Recommended metal mask thickness: 0.15mm 1 Ø1.2±0.05 B 1 1 2 Ø1.2±0.05 No.a84 No.a83 (A) (1.1):MATING LENGTH PCB 49.5 +0.1 0 0 46.3 -0.1 44.4±0.05 41.5±0.05 0.5±0.03 No.a1 No.a2 3 0 4.5 -0.1 1.45±0.05 Note 2 No.b2 No.b1 No.b83 No.b84 7.7 +0.1 0 3.1+0.1 0 PCB RECEPTACLE CONNECTOR FX10A(B)-168S-SV(83) FX10A(B)-168P-SV(83) FX10A(B)-168P-SV1(83) FX10A(B)-168P-SV2(83) FX10A(B)-168P-SV3(83) FX10A(B)-168P-SV4(83) 0.3±0.03(LAND WIDTH) 0.25±0.03(METAL MASK) 1 Not required in products without guideposts. Note 1 2 3 SOLDER 3 FX10A(B)-168S-SV(83) 1 (A) 2 B 4 4.3±0.127 5.3±0.127 5 6.0±0.127 6 7.0±0.127 7 8.0±0.127 8 Stacking height from lead to lead (reference dimensions) Board-to-board distance Stencil (metal mask) shall be based on Hirose's recommended aperture and thickness. FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors MSA-100GLH Electrical Interface ■Headers without ground plate 41.5±0.2 No.a84 No.a83 0.2±0.05 A 5.9±0.3 5.7±0.2 2.5±0.2 140 No.b1 (P=0.50) No.b2 No.a83 No.a84 (0.6) A±0.3 No.a1 No.a2 49.1±0.3 (Ø1) (Ø1) Guidepost 44.4±0.1 Unit: mm Part No. CL No. FX10A-168P-SV (**) FX10A-168P-SV1 (**) FX10A-168P-SV2 (**) FX10A-168P-SV3 (**) FX10A-168P-SV4 (**) FX10B-168P-SV (**) FX10B-168P-SV1 (**) FX10B-168P-SV2 (**) FX10B-168P-SV3 (**) FX10B-168P-SV4 (**) 570-0044-8-** 570-0144-2-** 570-0302-1-** 570-0304-7-** 570-0306-2-** 570-0054-1-** 570-0154-6-** 570-0303-4-** 570-0305-0-** 570-0307-5-** [Specifications number] -✽ ✽, (✽ ✽) (83): Embossed tape packaging / AuP 0.76µm Number of Contacts Signal A 168 3.5 4.5 5.25 6.25 7.25 3.5 4.5 5.25 6.25 7.25 Quantity/Reel (Note 3) 1,000 1,000 900 800 700 1,000 1,000 900 800 700 Remarks With guideposts Without guideposts (93): Tray packaging / AuP 0.76µm Note 1: There is no polarity in terms of board mounting for this product. Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less. Note 3: Please order embossed tape packaged items by the reel. Note 4: Using multiple connectors between identical boards is not recommended. ■Recommended Land Pattern Dimensions (Metal Mask Dimensions) Recommended metal mask thickness: 0.15 mm 49.5 +0.1 0 0 46.3-0.1 44.4±0.05 Ø1.2±0.05 41.5±0.05 1 No.b84 No.b83 No.a2 No.a1 No.a83 No.a84 6.3 +0.1 0 No.b1 No.b2 3.1+0.1 0 1 1.45±0.05 0 2.3 -0.1 0.5±0.03 Ø1.2±0.05 0.3±0.03(LAND PATTERN) 0.25±0.03(METAL MASK) Note 1 Not required in products without guideposts. 3 FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors ■Signal integrity ● Pin assignment To match 100 ohm differential impedance and to reduce crosstalk, a staggered GSGSG pin assignment is recommended. (G=ground and S=signal) GSGSG signal Diff pair ground ● Impedance The differential impedance is 100 +/- 10 ohm for FX10 at 30 ps rise time (20% to 80%). 5 mm (without GND) 115 115 110 110 105 105 Z (Ohm) Z (Ohm) 4 mm (without GND) 100 100 95 95 90 90 S(3,3) 85 0 200 400 600 Time (ps) 800 S(3,3) 85 1000 0 200 800 115 115 110 110 105 105 100 95 100 95 90 90 S(3,3) S(3,3) 85 1000 5 mm (with GND) Z (Ohm) Z (Ohm) 4 mm (with GND) 400 600 Time (ps) 0 200 400 600 Time (ps) 800 1000 85 0 200 400 600 Time (ps) 800 1000 ● Propagation delay The propagation delay is 62 and 67 ps for FX10 of 4mm and 5mm height (with and without GND), respectively. 4 FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors ● Insertion loss The differential insertion loss crosses 1 dB at 10.8 and 9.2 GHz for FX10 of 4mm and 5mm height, respectively. 4 mm (without GND) 5 mm (without GND) S (dB) 0 S (dB) 0 IL 0 5 10 Frequency (GHz) 15 IL 20 0 4 mm (with GND) 5 10 Frequency (GHz) 15 20 5 mm (with GND) S (dB) 0 IL 0 5 10 Frequency (GHz) 15 20 ● Return loss The differential return loss meets the IEEE 802.3ap specification to 20 + and 13.5 GHz for FX10 of 4mm and 5mm height, respectively. 4 mm (without GND) 5 mm (without GND) RL (dB) 0 RL (dB) 0 RL RL Spec RL RL Spec 0 5 10 Frequency (GHz) 15 20 0 4 mm (with GND) 5 10 Frequency (GHz) 15 20 5 mm (with GND) RL (dB) 0 RL (dB) 0 RL RL Spec RL RL Spec 0 5 10 Frequency (GHz) 15 20 0 5 10 Frequency (GHz) 15 20 5 FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors ● Near-end crosstalk (NEXT) The staggered GSGSG pin assignment results in low differential NEXT between neighboring pairs. 4 mm (without GND) 5 mm (without GND) 0 0 NEXT S (dB) S (dB) NEXT 0 5 10 Frequency (GHz) 15 0 20 5 4 mm (with GND) 10 Frequency (GHz) 15 20 5 mm (with GND) 0 0 S (dB) NEXT S (dB) NEXT 0 5 10 Frequency (GHz) 15 20 0 5 10 Frequency (GHz) 15 20 ● Far-end crosstalk (FEXT) The staggered GSGSG pin assignment results in low differential FEXT between neighboring pairs. 4 mm (without GND) 5 mm (without GND) 0 0 FEXT S (dB) S (dB) FEXT 0 5 10 Frequency (GHz) 15 0 20 4 mm (with GND) 10 Frequency (GHz) 15 20 5 mm (with GND) 0 0 FEXT S (dB) FEXT S (dB) 0 6 5 5 10 Frequency (GHz) 15 20 0 5 10 Frequency (GHz) 15 20 FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors ● Insertion-loss-to-crosstalk ratio (ICR) The insertion-loss-to-crosstalk ratio (ICR) with five-aggressor differential FEXT meets the extrapolated IEEE 802.3ap specification to 10+ Gbps. 5 mm (without GND) 60 50 50 40 40 ICR (dB) ICR (dB) 4 mm (without GND) 60 30 20 20 10 0 10 ICR ICR spec 0 2 4 6 Frequency (GHz) 8 0 10 4 mm (with GND) 60 50 50 40 40 30 20 0 2 4 6 Frequency (GHz) 8 10 8 10 5 mm (with GND) 30 20 10 0 ICR ICR spec 60 ICR (dB) ICR (dB) 30 10 ICR ICR spec 0 2 4 6 Frequency (GHz) 8 10 0 ICR ICR spec 0 2 4 6 Frequency (GHz) 7 FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors ■General Product Specifications Rated current 0.3 A Operating temperature range -55 to 85ç (Note 1) Rated voltage 50 V AC Operating humidity range Relative humidity 95% max (No condensation) Rating Storage temperature range -10 to +60ç (Note 2) Storage humidity range 40 to 70% (Note 2) Item Requirements Conditions 1. Insulation resistance 100 M ohm min Measured at 100 V DC 2. Voltage resistance No flashover or breakdown 150 V AC applied for one minute 3. Contact resistance 60 m ohm max Measured at 100 mA No electrical discontinuity for 1µs min Frequency: 10 to 55 Hz, amplitude of 0.75 mm in 3 directions, 10 4. Vibration No damage, cracks, or parts looseness cycles each No electrical discontinuity for 1µs min Acceleration of 490 m/s2, 11 ms duration, sine half-wave 5. Shock waveform, for 3 cycles in the both directions of each of the 3 axes No damage, cracks, or parts looseness 6. Damp heat Contact resistance of 70 m ohm max, insulation resistance of Temperature of 40ç, humidity of 90 to 95%, duration 96 h (Steady state) 100 M ohm min, no damage, cracks, or parts looseness Contact resistance of 70 m ohm max, insulation resistance of Temperature: -55ç → 15 to 35ç → 85ç → 15 to 35ç 7. Temperature cycle 100 M ohm min, no damage, cracks, or parts looseness Time: 30 min. → 2 to 3 min. → 30 min. → 2 to 3 min. for 5 cycles Contact resistance of 70 m ohm max 8. Durability 50 times No damage, cracks, or parts looseness 9. Resistance to Reflow: At the recommended temperature profile No melting of resin portion which affects performance Soldering iron temperature: 360ç for 5 seconds soldering heat Note 1: Includes temperature rise caused by current flow. Note 2: The term storage refers to an unused products prior to board mounting (including packing materials) that is being kept for a long period. The operating temperature and humidity range are suited to the non-conducting condition following board assembly. Note 3: Information contained in this catalog represents general requirements for this series. Contact us for the drawings and specifications for a specific part number shown. ■Materials Part Material Process Beige LCP Insulator Contact Area: Gold plating Header Lead Area: Tin plating Phosphor bronze Contacts Contact Area: Gold plating Receptacle --- Lead Area: Flash plating Ground plate Phosphor bronze Tin plating --- Metal fitting Phosphor bronze Tin plating --- ■Ordering Information FX10 # - ✽ P / ✽ - SV 1 (✽ ✽)) 1 2 4 5 6 7 3 1 Series name : FX10 2 Form symbol A : With guide post B : Without guide post 3 Number of contacts With ground plate Signal/Ground: 80/8, 100/10, 120/12, 140/14 Without ground plate Signal: 96, 120, 144, 168 8 Notes UL94V-0 4 Connector type P : Header S : Receptacle 5 Contact form SV : Straight SMT 6 Product height Blank : Standard 1 : Standard + 1mm 7 Packaging classification Blank, (71) : Tray packaging (21), (91): Embossed tape packaging FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors ■Headers with ground plate ●4mm Stacking Height Unit: mm Number of Contacts Part No. CL No. A B C D E F FX10A- 80P/ 8-SV(**) CL570-0001-5-** 80 FX10A-100P/10-SV(**) CL570-0002-8-** 8 23.5 18 31.1 26.4 31.5 28.3 FX10A-120P/12-SV(**) CL570-0003-0-** 100 10 29.5 24 37.1 32.4 37.5 34.3 120 12 35.5 30 43.1 38.4 43.5 40.3 FX10A-140P/14-SV(**) FX10B- 80P/ 8-SV(**) CL570-0004-3-** 140 14 41.5 36 49.1 46.3 80 8 23.5 18 31.1 44.4 — 49.5 CL570-0021-2-** 31.5 28.3 FX10B-100P/10-SV(**) CL570-0022-5-** 100 10 29.5 24 37.1 — 37.5 34.3 FX10B-120P/12-SV(**) CL570-0023-8-** 120 12 35.5 30 43.1 — 43.5 40.3 FX10B-140P/14-SV(**) CL570-0024-0-** 140 14 41.5 36 49.1 — 49.5 46.3 Signal Ground Remarks With guideposts Without guideposts [Specifications number] -✽ ✽, (✽ ✽) (71): Tray packaging (91): Embossed tape packaging Note 1: There is no polarity in terms of board mounting for this product. Note 2: The coplanarity of this product's SMT leads is 0.1mm or less. Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.) Note 4: Using multiple connectors between identical boards is not recommended. ■Recommended Land Pattern Dimensions (Metal Mask Dimensions) Recommended metal mask thickness: 0.15 mm Note 1 Cross-hatched portions, totaling n places, indicate the ground circuits. 2 Cross-hatched portions, 2 places on both sides, indicate the metal fittings. 3 The cross-hatched area inside the SMT land may come into contact with the connector contacts and thus care should be taken that the pattern does not extend beyond the SMT land width. 4 Not required in products without guideposts. 9 FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors ■Headers with ground plate ●5mm Stacking Height A±0.2 (0.5) 0.2±0.05 5.9±0.3 (5.7) 2.5±0.2 A 0.5±0.05 (0.75) (0.75) (6) B±0.2 4.5±0.3 C±0.3 (0.6) 2-(Ø1) D±0.1 Guidepost Unit: mm Number of Contacts Part No. CL No. A B C D E F FX10A- 80P/ 8-SV1(**) CL570-0101-0-** 80 8 23.5 18 31.1 26.4 31.5 28.3 FX10A-100P/10-SV1(**) CL570-0102-2-** FX10A-120P/12-SV1(**) CL570-0103-5-** 100 10 29.5 24 37.1 32.4 37.5 34.3 120 12 35.5 30 43.1 38.4 43.5 40.3 FX10A-140P/14-SV1(**) FX10B- 80P/ 8-SV1(**) CL570-0104-8-** 140 14 41.5 36 49.1 46.3 80 8 23.5 18 31.1 44.4 — 49.5 CL570-0121-7-** 31.5 28.3 FX10B-100P/10-SV1(**) CL570-0122-0-** 100 10 29.5 24 37.1 — 37.5 34.3 FX10B-120P/12-SV1(**) CL570-0123-2-** 120 12 35.5 30 43.1 — 43.5 40.3 FX10B-140P/14-SV1(**) CL570-0124-5-** 140 14 41.5 36 49.1 — 49.5 46.3 Signal Ground Remarks With guideposts Without guideposts [Specifications number] -✽ ✽, (✽ ✽) (71): Tray packaging (91): Embossed tape packaging Note 1: There is no polarity in terms of board mounting for this product. Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less. Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.) Note 4: Using multiple connectors between identical boards is not recommended. ■Recommended Land Pattern Dimensions (Metal Mask Dimensions) Recommended metal mask thickness: 0.15 mm Note 1 Cross-hatched portions, totaling n places, indicate the ground circuits. 2 Cross-hatched portions, 2 places on both sides, indicate the metal fittings. 3 The cross-hatched area inside the SMT land may come into contact with the connector contacts and thus care should be taken that the pattern does not extend beyond the SMT land width. 4 Not required in products without guideposts. 10 FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors ■Receptacles with ground plate A±0.2 (0.5) 0.2±0.05 7.3±0.3 (7.1) 2.5±0.2 A 0.5±0.05 (0.75) (6) (0.75) (0.6) 3.2±0.3 B±0.2 C±0.3 2-(Ø1) Guidepost D±0.1 Unit: mm Number of Contacts Part No. CL No. A B C D E F FX10A- 80S/ 8-SV(**) CL570-0201-4-** 80 8 23.5 18 31.1 26.4 31.5 28.3 FX10A-100S/10-SV(**) CL570-0202-7-** FX10A-120S/12-SV(**) CL570-0203-0-** 100 10 29.5 24 37.1 32.4 37.5 34.3 120 12 35.5 30 43.1 38.4 43.5 40.3 FX10A-140S/14-SV(**) FX10B- 80S/ 8-SV(**) CL570-0204-2-** 140 14 41.5 36 49.1 46.3 80 8 23.5 18 31.1 44.4 — 49.5 CL570-0221-1-** 31.5 28.3 FX10B-100S/10-SV(**) CL570-0222-4-** 100 10 29.5 24 37.1 — 37.5 34.3 FX10B-120S/12-SV(**) CL570-0223-7-** 120 12 35.5 30 43.1 — 43.5 40.3 FX10B-140S/14-SV(**) CL570-0224-0-** 140 14 41.5 36 49.1 — 49.5 46.3 Signal Ground Remarks With guideposts Without guideposts [Specifications number] -✽ ✽, (✽ ✽) (71): Tray packaging (91): Embossed tape packaging Note 1: There is no polarity in terms of board mounting for this product. Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less. Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.) ■Recommended Land Pattern Dimensions (Metal Mask Dimensions) Recommended metal mask thickness: 0.15 mm Note 1 Cross-hatched portions, totaling n places, indicate the ground circuits. 2 Cross-hatched portions, 2 places on both sides, indicate the metal fittings. 3 Not required in products without guideposts. 11 FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors ■Headers without ground plate ●4mm Stacking Height A±0.2 (5.7 ) 2.5 ±0.2 0.2 ±0.05 3.5±0.3 5.9 ±0.3 ( 0.5 ) (0.6 ) B±0.3 2-(Ø1) Guidepost C±0.1 Unit: mm Number of Contacts Part No. CL No. A B C D E FX10A- 96P-SV(**) CL570-0041-0-** 96 23.5 31.1 26.4 31.5 28.3 FX10A-120P-SV(**) FX10A-144P-SV(**) CL570-0042-2-** 120 29.5 37.1 32.4 37.5 34.3 CL570-0043-5-** 144 35.5 43.1 38.4 43.5 40.3 FX10A-168P-SV(**) CL570-0044-8-** 168 41.5 49.1 46.3 CL570-0051-3-** 96 23.5 31.1 44.4 — 49.5 FX10B- 96P-SV(**) 31.5 28.3 FX10B-120P-SV(**) CL570-0052-6-** 120 29.5 37.1 — 37.5 34.3 FX10B-144P-SV(**) CL570-0053-9-** 144 35.5 43.1 — 43.5 40.3 FX10B-168P-SV(**) CL570-0054-1-** 168 41.5 49.1 — 49.5 46.3 Signal Remarks With guideposts Without guideposts [Specifications number] -✽ ✽, (✽ ✽) (71): Tray packaging (91): Embossed tape packaging Note 1: There is no polarity in terms of board mounting for this product. Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less. Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.) ■Recommended Land Pattern Dimensions (Metal Mask Dimensions) Recommended metal mask thickness: 0.15 mm D +0.1 0 0 E -0.1 2 Ø1.2 ±0.05 6.3 +0.1 0 3.1 +0.1 0 1.45 ±0.05 0.5 ±0.03 0 4.1 -0.1 A ±0.05 2 Ø1.1 ±0.05 0 2 -0.1 1 C ±0.05 0.3 ±0.03(Land) 0.25±0.03(Metal mask) Note 1 The cross-hatched area inside the SMT land may come into contact with the connector contacts and thus care should be taken that the pattern does not extend beyond the SMT land width. 2 Not required in products without guideposts. 12 FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors ■Headers without ground plate ●5mm Stacking Height A ±0.2 ( 5.7 ) 2.5 ±0.2 0.2 ±0.05 4.5±0.3 5.9 ±0.3 ( 0.5 ) (0.6 ) B ±0.3 2-(Ø 1) Guidepost C ±0.1 Unit: mm Number of Contacts Part No. CL No. A B C D E FX10A- 96P-SV1(**) CL570-0141-4-** 96 23.5 31.1 26.4 31.5 28.3 FX10A-120P-SV1(**) FX10A-144P-SV1(**) CL570-0142-7-** 120 29.5 37.1 32.4 37.5 34.3 CL570-0143-0-** 144 35.5 43.1 38.4 43.5 40.3 FX10A-168P-SV1(**) CL570-0144-2-** 168 41.5 49.1 46.3 CL570-0151-8-** 96 23.5 31.1 44.4 — 49.5 FX10B- 96P-SV1(**) 31.5 28.3 FX10B-120P-SV1(**) CL570-0152-0-** 120 29.5 37.1 — 37.5 34.3 FX10B-144P-SV1(**) CL570-0153-3-** 144 35.5 43.1 — 43.5 40.3 FX10B-168P-SV1(**) CL570-0154-6-** 168 41.5 49.1 — 49.5 46.3 Signal Remarks With guideposts Without guideposts [Specifications number] -✽ ✽, (✽ ✽) (71): Tray packaging (91): Embossed tape packaging Note 1: There is no polarity in terms of board mounting for this product. Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less. Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.) Note 4: Using multiple connectors between identical boards is not recommended. ■Recommended Land Pattern Dimensions (Metal Mask Dimensions) Recommended metal mask thickness: 0.15 mm D +0.1 0 0 E -0.1 2 Ø1.2 ±0.05 6.3 +0.1 0 3.1 +0.1 0 1.45 ±0.05 0.5 ±0.03 0 4.1 -0.1 A ±0.05 2 Ø1.1 ±0.05 0 2 -0.1 1 C ±0.05 0.3 ±0.03(Land) 0.25±0.03(Metal mask) Note 1 The cross-hatched area inside the SMT land may come into contact with the connector contacts and thus care should be taken that the pattern does not extend beyond the SMT land width. 2 Not required in products without guideposts. 13 FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors ■Receptacles without ground plate A±0.2 B±0.3 3.2±0.3 ( 7.1 ) 0.2 ±0.05 2.5 ±0.2 7.3 ±0.3 ( 0.5 ) ( 0.6 ) 2-(Ø1) C±0.1 Guidepost Unit: mm Number of Contacts Part No. CL No. A B C D E FX10A- 96S-SV(**) CL570-0241-9-** 96 23.5 31.1 26.4 31.5 28.3 FX10A-120S-SV(**) FX10A-144S-SV(**) CL570-0242-1-** 120 29.5 37.1 32.4 37.5 34.3 CL570-0243-4-** 144 35.5 43.1 38.4 43.5 40.3 FX10A-168S-SV(**) CL570-0244-7-** 168 41.5 49.1 46.3 CL570-0251-2-** 96 23.5 31.1 44.4 — 49.5 FX10B- 96S-SV(**) 31.5 28.3 FX10B-120S-SV(**) CL570-0252-5-** 120 29.5 37.1 — 37.5 34.3 FX10B-144S-SV(**) CL570-0253-8-** 144 35.5 43.1 — 43.5 40.3 FX10B-168S-SV(**) CL570-0254-0-** 168 41.5 49.1 — 49.5 46.3 Signal Remarks With guideposts Without guideposts [Specifications number] -✽ ✽, (✽ ✽) (71): Tray packaging (91): Embossed tape packaging Note 1: There is no polarity in terms of board mounting for this product. Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less. Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.) Note 4: Using multiple connectors between identical boards is not recommended. ■Recommended Land Pattern Dimensions (Metal Mask Dimensions) Recommended metal mask thickness: 0.15 mm D +0.1 0 0 E -0.1 C±0.05 Ø1.2±0.05 1 A±0.05 1.45±0.05 Note 1 Not required in products without guideposts. 14 7.7 +0.1 0 0 4.5 -0.1 0.5±0.03 3.1 +0.1 0 1 Ø1.1±0.05 0.3±0.03(Land) 0.25±0.03(Metal mask) FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors ■Embossed Carrier Tape Dimensions Unit: mm 0 Ø1.5 +0.1 12±0.1 4±0.1 1.75±0.1 ●Headers 2 ±0.1 (D) 0.9 Insertion Connector B C FX10#- 80P/ 8-SV B±0.1 C±0.3 A±0.1 FX10#-120P/12-SV (6.2) (6.6) FX10#- 96P -SV 20.2 40.4 44 FX10#-120P -SV FX10#-144P -SV FX10#-168P -SV 0.2 ±0.05 +0.05 Ø1.5 2 ±0.1 1.75±0.1 +0.1 0 ●Receptacles ( 3.5) ( 0.4) 0.9 3.8 F G 64 76.5 81.5 45.5 50.5 59 26.2 52.4 56 34.2 68.4 72 76.5 81.5 45.5 50.5 59 26.2 52.4 56 FX10#- 96P -SV1 20.2 40.4 44 FX10#-120P -SV1 FX10#-144P -SV1 FX10#-168P -SV1 34.2 68.4 72 4.8 64 76.5 81.5 45.5 50.5 59 26.2 52.4 56 330 64 FX10#- 80P/ 8-SV1 20.2 40.4 44 FX10#-140P/14-SV1 34.2 68.4 72 R0.75 0 59 26.2 52.4 56 34.2 68.4 72 FX10#-120P/12-SV1 4±0.1 E 45.5 50.5 20.2 40.4 44 FX10#-140P/14-SV FX10#-100P/10-SV1 12±0.1 D (0.4) FX10#-100P/10-SV Unreeling direction A 370 64 76.5 81.5 Note: There is no polarity in terms of embossed tape packaging for this product. A±0.1 Unit: mm B±0.1 C±0.3 Insertion Connector FX10#- 80S/ 8-SV FX10#-100S/10-SV FX10#-120S/12-SV 0.2 ±0.05 Unreeling direction (7.6) (8) A B C E F G 20.2 40.4 44 45.5 50.5 26.2 52.4 56 59 64 FX10#-140S/14-SV 34.2 68.4 72 76.5 81.5 FX10#- 96S -SV 20.2 40.4 44 45.5 50.5 FX10#-120S -SV FX10#-144S -SV FX10#-168S -SV 26.2 52.4 56 59 330 64 34.2 68.4 72 76.5 81.5 Note: There is no polarity in terms of embossed tape packaging for this product. +0.05 R0.75 0 Ø13±0.5 (Ø80) (G) ●Reel Dimensions (E) (F) 15 FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors ■Recommended Temperature Profile HRS test Conditions Test board Glass epoxy 161mm∞100mm∞1.6mm thick Solder method :Reflow Solder composition :Paste, Metal mask :0.15mm thick Reflow cycles :2 cycles 96.5%Sn/3%Ag/0.5%Cu The temperature profile is based on the above conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. Consult your solder paste and equipment manufacturer for specific recommendations. ■Washing Conditions Organic Solvent Cleaning Solvent IPA (Isopropyl alcohol) HCFC (Hydrochlorofluorocarbon) Room temperature washing Heated washing Yes Yes Yes Yes Water Type Cleaning When using water based cleaning agents (e.g., terpene, and alkali saponifiers), select the cleaning agent based on the documentation issued by the various manufacturers of cleaning agents which describes the effects on metals and resins. Be careful that parts are not left with moisture remaining on them. Cleaning Precautions Residual flux or cleaning agent on the contacts when washing with organic solvents or water type cleaners can give rise to the deterioration of electrical performance. In this regard it is important to check whether a thorough washing has been performed. ■Connector Handling Precautions 1. Allowable Creepage Dimensions at Time of Mating The effective mating length of this product is 1.1 mm for the signal portion and 1 mm for the ground portion. The creepage of the header and receptacle at the time of mating should be within 0.5 mm of the completely mating condition. 2. Retension of Boards Avoid the support of boards by connectors alone and adopt a locking measure that does not rely on the connectors. 3. Solder Repair Flux may rise as far as the contact portion of the connector depending on the flux coating and other factors at the time of repair. This will cause poor contact reliability; therefore, before use, the aforementioned washing conditions should be taken into consideration prior to connector washing. 4. Miscellaneous ·Note that excessive twisting while inserting or withdrawing connectors will cause damage. ·The shade of the molded items may vary somewhat depending on the manufacturing lot; however, this does not affect performance. 16 FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors NOTES : 17 FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors NOTES : 18 FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors NOTES : 19 FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors USA: HIROSE ELECTRIC (U.S.A.), INC. Headquarters 2688 Westhills Court, Simi Valley, CA 93065-6235 Phone : 1-805-522-7958 Fax : 1-805-522-3217 http://www.hiroseusa.com USA: HIROSE ELECTRIC (U.S.A.), INC. North California Office 20400 Stevens Creek Blvd., Ste 250, Cupertino, CA 95014 Phone : 1-408-253-9640 Fax : 1-408-253-9641 http://www.hiroseusa.com USA: HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive) 37677 Professional Center Drive, Suite #100C Livonia, MI 48154 Phone : 1-734-542-9963 Fax : 1-734-542-9964 http://www.hiroseusa.com GERMANY: HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH Herzog-Carl-Strasse 4 D-73760 Ostfildern (Scharnhauser Park) Phone : 49-711-4560-02-1 Fax : 49-711-4560-02-299 http://www.hirose.de THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Hogehillweg #8 1101 CC Amsterdam Z-O Phone : 31-20-6557460 Fax : 31-20-6557469 http://www.hiroseeurope.com UK: HIROSE ELECTRIC EUROPE B.V. UK BRANCH First Floor, St Andrews House, Caldecotte Lake Business Park, Milton Keynes MK7 8LE Phone : 44-1908-369060 Fax : 44-1908-369078 http://www.hirose.co.uk CHINA: HIROSE ELECTRIC CO., LTD. BEIJING REPRESENTATIVE OFFICE A1001, Ocean International Center, Building 56# East 4th Ring Middle Road, Chao Yang District, Beijing, 100025 Phone : 86-10-5165-9332 Fax : 86-10-5908-1381 http://www.hirose-china.com.cn CHINA: HIROSE ELECTRIC (SHANGHAI) CO., LTD. 1501-02, Cross Tower Building, 318 Fuzhou Road, Huang Pu District, Shanghai 200001 Phone : 86-21-6391-3355 Fax : 86-21-6335-0767 http://www.hirose-china.com.cn CHINA: HIROSE ELECTRIC CO., LTD. SHENZHEN OFFICE Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre 5002, ShenNanDong Road, ShenZhen City, Guangdong Province, 518008 Phone : 86-755-8207-0851 Fax : 86-755-8207-0873 http://www.hirose-china.com.cn HONG KONG: HIROSE ELECTRIC HONGKONG TRADING CO., LTD. Unit 1102 A&B, Energy Plaza, 92 Granville Road, Tsim Sha Tsui East, Kowloon Phone : 852-2803-5338 Fax : 852-2591-6560 http://www.hirose-hongkong.com.hk TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD. 103 8F, No.87, Zhengzhou Rd., Taipei Phone : 886-2-2555-7377 Fax : 886-2-2555-7350 http://www.hirose-taiwan.com.tw SINGAPORE: HIROSE ELECTRIC CO., LTD. 10 Anson Road #26-16 International Plaza 079903 Phone : 65-6324-6113 Fax : 65-6324-6123 http://www.hirose-singapore.com.sg KOREA: HIROSE KOREA CO., LTD. 1261-10, Jeoungwhang-Dong, Shihung-City, Kyunggi-Do 429-450 Phone : 82-31-496-7000,7124 Fax : 82-31-496-7100 http://www.hirose.co.kr ® 20 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-5300, FAX: 81-3-3495-5230 http://www.hirose.com http://www.hirose-connectors.com The contents of this catalog are current as of date of 01/2011. Contents are subject to change without notice for the purpose of improvements.