NEW 10+Gbps 0.8mm pitch Board to Board Connectors FX18 Series ■Mechanical features ● 0.8mm Pitch ● Variations :Coplanar / Vertical / Stacking ● Number of Contacts : 40 / 60 / 80 / 100 / 120/ 140 ● Multi functional contact (MF contact) as; q ground contact to enhance grounding. w power supply contacts up to 12 A to reduce required pin counts. e 3-step sequential contacts for grounding and detection. ● Effective mating length of signal contact: 2.0 mm. (MF contact A:2.5mm / MF contact B:1.5mm) Single contact ● Pin through hole mounting MF contacts increase strength against wrenching. ● Large mating guide for easy mating. MF contact A MF contact B ICR ■Signal integrity features Impedance 60 ●Insertion Loss-to-Crosstalk-Ratio (ICR) 110 50 The insertion loss-to-crosstalk ratio (ICR) with five-aggressor differential FEXT meets the extrapolated IEEE802.3ap specification for 10+Gbps with plenty of margins. 105 Z (Ohms) ICR (dB) 40 30 100 20 95 ●Differential Impedance 10 The differential impedance is within 100±10 ohms at 35 ps rise time( 20% to 80%) 0 ICR IEEE spec 0 2 4 6 Frequency (GHz) 8 10 90 Inner row 0 0.2 0.4 0.6 Time (ns) 0.8 1 ■Variations Coplanar connection Vertical connection FX18-**S-0.8SH FX18-**P-0.8SH FX18-**S-0.8SH FX18-**P-0.8SV** 15~30 10.85 15.15 9.5 20.3 Stacking connection FX18-**P-0.8SV 7.8 FX18-**S-0.8SV** 2012.4 1 FX18 Series●10+Gbps 0.8mm pitch Board to Board Connectors ■Product Specification Current Rating0.5A(Signal) (Note3) 3.0A(MF contact ) Voltage Rating AC100V Rating Operating Temperature Range Storage Temperature Range Item 1.Contact Resistance 2.Insulation Resistance 3.Voltage Proof 4.Durabirity (mating/unmating) Specification 90m ohms max 1000M ohms min No flashover or insulation breakdown 100mA 250V DC 300V AC / 1min Contact resistance: 100m ohms max 500 cycles 5.Vibration No electrical discontinuity of 1µs or more 6.Shock No electrical discontinuity of 1µs or more -55ç ~ 80ç (Note 1) -10ç ~ 60ç (Note 2) Condition Frequency:10 to 55Hz, Approx 5 min Single ampritude0.75mm, 10cycles for 3 directions 490m/s2,Duration of pulse 11ms, at 3 time for 3 directions 96 hours at temperature of 40±2ç and humidity of 90% to 95% 7.Humidity (Steady state) Contact Resistance :100m ohms max Insulation Resistance: 1000M ohms min Contact Resistance :100m ohms max (-55ç:30 minutes,85ç:30minutes) under 5 cycle 8.Temperature Cycle Insulation Resistance: 1000M ohms min (Note 1) Includes temperature rise caused by current flow. (Note 2) “Storage” means a long-term storage state for the unused product before assembly to pcb. (Note 3) The rated current applies to per contact. (Note 4) Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. ■Material ●Receptacle / Header Part Material Insulator PA Signal contact Phosphor bronze MF contact Phosphor bronze Finish Remark Black UL94V-0 Contact area:Gold plated Lead area :Gold plated Contact area:Gold plated Lead area :Tin plated –––––– –––––– ■Ordering Information ●Right Angle Receptacle ❶ Series Name FX18 - 60 S - 0.8 SH ❶ ❷ ❸ ❹ ❸ Connector Type S ❺ P ●Right Angle Header FX18 - 60 P - 0.8 SH ❶ ❷ ❸ ❹ ❺ FX18 - 60 P - 0.8 SV 10 ❷ ❸ ❹ ❺ ❻ ●Straight Receptacle FX18 - 60 S - 0.8 SV 15 ❶ 2 ❷ ❸ ❹ ❺ :Receptacle :Header ❹ Contact Pitch :0.8mm ❺ Contact Type SH :Board Right Angle Type SV :Board Straight Type ❻ Stacking Height Designation ●Straight Header ❶ ：FX18 ❷ Number of contacts ❻ FX18 Series●10+Gbps 0.8mm pitch Board to Board Connectors ■Function Chart ●Right Angle Receptacle ●Right Angle Header 【 FX18-**S-0.8SH 】 【 FX18-**P-0.8SH 】 Coplanar connection ●Straight Receptacle Vertical connection ●Straight 【 FX18-**S-0.8SV15 】 Header 【 FX18-**P-0.8SV 】 【 FX18-**S-0.8SV20 】 Stacking connection 【 FX18-**P-0.8SV10 】 ■Stacking connections Heights Stacking Variation Straight Header FX18-**P-0.8SV** FX18-**P-0.8SV FX18-**P-0.8SV10 FX18-**S-0.8SV15 15mm 25mm FX18-**S-0.8SV20 20mm 30mm Straight Receptacle FX18-**S-0.8SV** ■Signal Integrity ●Pin assignment To match 100 ohm differential impedance and to reduce crosstalk, a staggered GSSG pin assignment is recommended for FX18. (G=ground and S=signal) Cross section of mating (coplanar connection) Pin assignment ( In case of 40 pos. ) Contact No.1 Contact No.20 Contact No.21 Contact No.40 Outer row Inner row Signal pin Diff pair Inner row Ground pin Outer row 3 FX18 Series●10+Gbps 0.8mm pitch Board to Board Connectors ●Impedance The differential impedance is 100±10 ohm for FX18 at 35 ps rise time (20% to 80%) Outer row 110 105 Z (Ohms) Z (Ohms) 105 100 95 90 Inner row 110 100 95 Outer row 0 0.2 0.4 0.6 Time (ns) 0.8 Inner row 90 1 0 0.2 0.4 0.6 Time (ns) 0.8 1 ●Insertion Loss The differential insertion loss crosses 1dB at 6GHz for FX18. Outer row -0.5 -0.5 -1 -1 -1.5 -1.5 -2 -2 -2.5 -2.5 -3 Outer row 0 2 Inner row 0 S (dB) S (dB) 0 4 6 Frequency (GHz) 8 -3 10 Inner row 0 2 4 6 Frequency (GHz) 8 10 ●Return loss The differential return loss meets the IEEE 802.3ap specification to 10 GHz for FX18. Outer row -10 -10 -20 -20 -30 -40 -50 4 5 10 Frequency (GHz) 15 -30 -40 RL IEEE Spec 0 Inner row 0 RL (dB) RL (dB) 0 20 -50 RL IEEE Spec 0 5 10 Frequency (GHz) 15 20 FX18 Series●10+Gbps 0.8mm pitch Board to Board Connectors ●Near-end crosstalk (NEXT) The staggered GSSG pin assignments resulted in low differential NEXT. Outer row S12 -10 -10 -20 -20 -30 -40 -50 -50 0 2 4 6 Frequency (GHz) 8 -60 10 S12 -30 -40 -60 Inner row 0 S (dB) S (dB) 0 0 2 4 6 Frequency (GHz) 8 10 8 10 ●Far-end crosstalk (FEXT) The staggered GSSG pin assignments resulted in low differential FEXT. Outer row S14 -10 -10 -20 -20 -30 -40 -50 -50 0 2 4 6 Frequency (GHz) 8 -60 10 S14 -30 -40 -60 Inner row 0 S (dB) S (dB) 0 0 2 4 6 Frequency (GHz) ●Insertion-loss-to-crosstalk ratio (ICR) The insertion-loss-to-crosstalk ratio (ICR) with multi-aggressor differential FEXT meets the extrapolated IEEE 802.3ap specification to 10+Gbps with plenty of margins. Outer row 50 50 40 40 30 20 30 20 10 0 Inner row 60 ICR (dB) ICR (dB) 60 10 ICR IEEE spec 0 2 4 6 Frequency (GHz) 8 10 0 ICR IEEE spec 0 2 4 6 Frequency (GHz) 8 10 5 FX18 Series●10+Gbps 0.8mm pitch Board to Board Connectors A±0.2 P=0.8±0.15 ●Right Angle Receptacle 0.25±0.1 B±0.2 No.F 11.9±0.2 9.5±0.15 No.1 3.6±0.15 5.1±0.2 C±0.15 No.H 1.5±0.15 1.2±0.15 1.35 +0.15 – 0.25 No.G D±0.25 E±0.25 1.2±0.15 6.05±0.25 4.75±0.25 8.5±0.25 All dimensions in mm A 15.2 23.2 31.2 39.2 47.2 55.2 B 27.9 35.9 43.9 51.9 59.9 67.9 C 25.0 33.0 41.0 49.0 57.0 65.0 D 18.4 26.4 34.4 42.4 50.4 58.4 E 24.65 32.65 40.65 48.65 56.65 64.65 F 20 30 40 50 60 70 G 21 31 41 51 61 71 H(pos.) 40 60 80 100 120 140 No marking, "under development" ●Right Angle Header A±0.02 P=0.8±0.15 B±0.2 5.4±0.2 8.4±0.2 9.5±0.15 C±0.15 No.1 No.F 0.25±0.1 5.1±0.2 ★ indicates "available". HRS No. CL579-0009-4 CL579-0010-3 CL579-0011-6 CL579-0012-9 CL579-0013-1 CL579-0014-4 3.55±0.15 ★ ★ ★ ★ ★ ★ Part Number FX18-40S-0.8SH FX18-60S-0.8SH FX18-80S-0.8SH FX18-100S-0.8SH FX18-120S-0.8SH FX18-140S-0.8SH No.G 1.35 +0.15 – 0.25 No.H D±0.25 E±0.25 1.2±0.15 1.5±0.15 2.55±0.25 1.2±0.15 4.75±0.25 5±0.25 All dimensions in mm ★ ★ ★ ★ ★ ★ Part Number FX18-40P-0.8SH FX18-60P-0.8SH FX18-80P-0.8SH FX18-100P-0.8SH FX18-120P-0.8SH FX18-140P-0.8SH ★ indicates "available". 6 HRS No. CL579-0002-5 CL579-0003-8 CL579-0004-0 CL579-0005-3 CL579-0006-6 CL579-0007-9 A 15.2 23.2 31.2 39.2 47.2 55.2 No marking, "under development" B 27.9 35.9 43.9 51.9 59.9 67.9 C 24.95 32.95 40.95 48.95 56.95 64.95 D 18.4 26.4 34.4 42.4 50.4 58.4 E 24.65 32.65 40.65 48.65 56.65 64.65 F 20 30 40 50 60 70 G 21 31 41 51 61 71 H(pos.) 40 60 80 100 120 140 FX18 Series●10+Gbps 0.8mm pitch Board to Board Connectors ●Straight Header A±0.2 B±0.2 P=0.8±0.15 0.25±0.1 No.H 7.8±0.2 No.G No.1 No.F C±0.15 1.35 +0.15 – 0.25 (8.65) 3.55±0.15 D±0.25 E±0.25 1±0.15 1.2±0.15 5.1±0.2 All dimensions in mm ★ ★ ★ ★ Part Number FX18-40P-0.8SV FX18-60P-0.8SV FX18-80P-0.8SV FX18-100P-0.8SV FX18-120P-0.8SV FX18-140P-0.8SV ★ indicates "available". HRS No. CL579-0016-0 CL579-0017-2 CL579-0018-5 –––––– CL579-0020-7 –––––– A 27.9 35.9 43.9 51.9 59.9 67.9 B 15.2 23.2 31.2 39.2 47.2 55.2 C 24.95 32.95 40.95 48.95 56.95 64.95 D 18.4 26.4 34.4 42.4 50.4 58.4 E 24.65 32.65 40.65 48.65 56.65 64.65 F 20 30 40 50 60 70 G 21 31 41 51 61 71 H(pos.) 40 60 80 100 120 140 No marking, "under development" A±0.2 B±0.2 ●Straight Header (10 type) P=0.8±0.15 0.35±0.1 No.H 7.8±0.2 No.G No.1 No.F 3.55±0.15 ★ ★ ★ ★ Part Number FX18-40P-0.8SV10 FX18-60P-0.8SV10 FX18-80P-0.8SV10 FX18-100P-0.8SV10 FX18-120P-0.8SV10 FX18-140P-0.8SV10 ★ indicates "available". HRS No. CL579-0022-2 CL579-0023-5 CL579-0024-8 ――― CL579-0025-0 ――― A 27.9 35.9 43.9 51.9 59.9 67.9 B 15.2 23.2 31.2 39.2 47.2 55.2 C 24.95 32.95 40.95 48.95 56.95 64.95 D 18.4 26.4 34.4 42.4 50.4 58.4 E 24.65 32.65 40.65 48.65 56.65 64.65 F 20 30 40 50 60 70 4.9±0.2 2±0.2 1.35 −0.3 1.2±0.15 1.2±0.15 4.9±0.2 2±0.2 D±0.25 E±0.25 ＋0.15 18.65±0.3 C±0.15 All dimensions in mm G 21 31 41 51 61 71 H(pos.) 40 60 80 100 120 140 No marking, "under development" 7 A±0.2 B±0.15 C±0.2 P= 0.8±0.15 0.35±0.1 No.G 7.8±0.2 No.H 5.1±0.2 ●Straight Receptacle(15type) 3.6±0.15 FX18 Series●10+Gbps 0.8mm pitch Board to Board Connectors No.1 4.9±0.2 1.2±0.15 2±0.2 1.2±0.15 4.9±0.2 2±0.2 D±0.25 E±0.25 1.35 +0.15 -0.3 11.45±0.3 No.F All dimensions in mm ★ indicates "available". A 27.9 35.9 43.9 51.9 59.9 67.9 B 25 33 41 49 57 65 C 15.2 23.2 31.2 39.2 47.2 55.2 D 18.4 26.4 34.4 42.4 50.4 58.4 E 26.05 34.05 42.05 50.05 58.05 66.05 F 20 30 40 50 60 70 G 21 31 41 51 61 71 H(pos.) 40 60 80 100 120 140 No marking, "under development" ●Straight Receptacle(20type) No.G 7.8±0.2 No.H A±0.2 B±0.15 C±0.2 P=0.8±0.15 0.35±0.1 5.1±0.2 ★ HRS No. CL579-0026-3 CL579-0027-6 CL579-0028-9 –––––– CL579-0029-1 ――― 3.6±0.15 ★ ★ ★ Part Number FX18-40S-0.8SV15 FX18-60S-0.8SV15 FX18-80S-0.8SV15 FX18-100S-0.8SV15 FX18-120S-0.8SV15 FX18-140S-0.8SV15 No.1 16.45±0.3 No.F ★ ★ ★ ★ Part Number FX18-40S-0.8SV20 FX18-60S-0.8SV20 FX18-80S-0.8SV20 FX18-100S-0.8SV20 FX18-120S-0.8SV20 FX18-140S-0.8SV20 ★ indicates "available". 8 HRS No. CL579-0030-0 CL579-0031-3 CL579-0032-6 ――― CL579-0033-9 ――― A 27.9 35.9 43.9 51.9 59.9 67.9 No marking, "under development" B 25 33 41 49 57 65 C 15.2 23.2 31.2 39.2 47.2 55.2 D 18.4 26.4 34.4 42.4 50.4 58.4 E 26.05 34.05 42.05 50.05 58.05 66.05 F 20 30 40 50 60 70 4.9±0.2 1.2±0.15 2±0.2 1.2±0.15 4.9±0.2 2±0.2 +0.15 1.35 -0.3 D±0.25 E±0.25 All dimensions in mm G H(pos.) 21 40 31 60 41 80 51 100 61 120 71 140 FX18 Series●10+Gbps 0.8mm pitch Board to Board Connectors ■Recommended Land Pattern Dimension of PCB (PCB thickness: t=1.6mm / Metal mask thickness: t=0.12mm) 2.1＋0.1 0 (TH) 1＋0.1 0 (TH) Part Number FX18-40S-0.8SH ＋0.1 0 (TH) ＋0.1 1 0 FX18-40P-0.8SH FX18-60S-0.8SH FX18-60P-0.8SH 0.4 ＋0.05 0 A±0.05 B±0.05 FX18-80S-0.8SH FX18-80P-0.8SH FX18-100S-0.8SH 2±0.05 P=0.8±0.05 2.1 ＋0.1 0 .5 R0 4.05±0.05 1.7 +0.1 (TH) 0 8.4±0.05 2 2 +0.1 (TH) 0 6.5±0.05 4.75±0.05 ●Right Angle Receptacle / Right Angle Header FX18-100P-0.8SH FX18-120S-0.8SH PCB EDGE C±0.05 FX18-120P-0.8SH FX18-140S-0.8SH FX18-140P-0.8SH A B C 15.2 18.4 24.65 23.2 26.4 32.65 31.2 34.4 40.65 39.2 42.4 48.65 47.2 50.4 56.65 55.2 58.4 64.65 +0.05 0 2.1 +0.1 0 .5 R0 1.2 +0.1 0 (TH) 5.1±0.05 P=0.8±0.05 0.4 A±0.05 A B C FX18-40P-0.8SV 15.2 18.4 24.65 FX18-60P-0.8SV 23.2 26.4 32.65 FX18-80P-0.8SV 31.2 34.4 40.65 FX18-100P-0.8SV 39.2 42.4 48.65 FX18-120P-0.8SV 47.2 50.4 56.65 FX18-140P-0.8SV 55.2 58.4 64.65 Part Number A B C Part Number 8.4±0.05 1 +0.1 (TH) 0 2.1 +0.1 0 1 +0.1 (TH) 0 2 +0.1 (TH) 0 1.8 +0.1 (TH) 0 ●Straight Header B±0.05 C±0.05 0.5 +0.1 0 2.1 P=0.8±0.05 +0.05 0 2±0.05 R0 .5 1.4+0.1 0（TH） 8.4±0.05 +0.1 0 (TH) +0.1 0 2±0.05 1 2.1 1 +0.1 0 (TH) 2 +0.1 0 (TH) 4.9±0.05 2 +0.1 0（TH） ●Straight Header (SV 10 type) A±0.05 B±0.05 C±0.05 FX18-40P-0.8SV10 15.2 18.4 24.65 FX18-60P-0.8SV10 23.2 26.4 32.65 FX18-80P-0.8SV10 31.2 34.4 40.65 FX18-100P-0.8SV10 39.2 42.4 48.65 FX18-120P-0.8SV10 47.2 50.4 56.65 FX18-140P-0.8SV10 55.2 58.4 64.65 Part Number A B C 0.5 ＋0.05 0 2±0.05 P=0.8±0.05 2.1 ＋0.1 0 .5 R0 1.4+0.1 0（TH） 4.9±0.05 8.4±0.05 1 +0.1 0 (TH) 2.1 ＋0.1 0 +0.1 0 (TH) +0.1 2 0（TH） 1 2±0.05 2 +0.1 0 (TH) ●Straight Receptacle (SV 15 / SV20 type) FX18-40S-0.8SV15/20 15.2 18.4 26.05 FX18-60S-0.8SV15/20 23.2 26.4 34.05 FX18-80S-0.8SV15/20 31.2 34.4 42.05 FX18-100S-0.8SV15/20 39.2 42.4 50.05 FX18-120S-0.8SV15/20 47.2 50.4 58.05 FX18-140S-0.8SV15/20 55.2 58.4 66.05 A±0.05 B±0.05 C±0.05 9 FX18 Series●10+Gbps 0.8mm pitch Board to Board Connectors ■Packing specification ●Right Angle Receptacle / Right Angle Header (325) (45) (235) (30) (P=47) A FX18-60P/S-0.8SH Part Number FX18-40S-0.8SH FX18-40P-0.8SH (P=18) FX18-60S-0.8SH FX18-60P-0.8SH FX18-80S-0.8SH (225) (162) FX18-80P-0.8SH FX18-100S-0.8SH FX18-100P-0.8SH FX18-120S-0.8SH FX18-120P-0.8SH FX18-140S-0.8SH FX18-140P-0.8SH Quantity 70 60 50 40 40 40 >PS< QTY.60 ●Straight Header (325) (230±0.5) (47.5) (P=46) FX18-60P-0.8SV (225) (162) (P=18) (31.5) A QTY.60 10 >PS< Part Number Quantity FX18-40P-0.8SV 70 FX18-60P-0.8SV 60 FX18-80P-0.8SV 50 FX18-100P-0.8SV 40 FX18-120P-0.8SV 40 FX18-140P-0.8SV 40 FX18 Series●10+Gbps 0.8mm pitch Board to Board Connectors ●Straight Header 10 type / Straight Receptacle (15/20 type) Part Number (325) (230) (31.5) (47.5) (P=46) FX18-40S-0.8SV15 FX18-60S-0.8SV20 Ａ 60 FX18-40S-0.8SV20 FX18-60P-0.8SV10 FX18-60P-0.8SV10 FX18-60S-0.8SV15 60 (P=18) FX18-60S-0.8SV20 FX18-80P-0.8SV10 FX18-80S-0.8SV15 50 FX18-80S-0.8SV20 (162) (225) Quantity FX18-40P-0.8SV10 FX18-100P-0.8SV10 FX18-100S-0.8SV15 40 FX18-100S-0.8SV20 FX18-120P-0.8SV10 FX18-120S-0.8SV15 40 FX18-120S-0.8SV20 QTY.60 >PS< FX18-140P-0.8SV10 FX18-140S-0.8SV15 40 FX18-140S-0.8SV20 ■Mounting Temperature Profile (Reference) 260 (MAX 250ç) 240 220ç 220 200ç 200 Temperature 180 160 140 150ç (ç) 0 90±120s Pre-heating time (150 to 200ç) MAX 60s Soldering Time (220ç min.) Time (Second) HRS test conditions Test board dimension material Solder method Solder composition Metal mask Reflow cycle : 110∞50∞1.6mm : Glass epoxy : Reflow : Paste Sn-3Ag-0.5Cu : 0.12mm thick : 2 cycle The temperature profile is based on the above conditions. In individual applications the actual temperature may vary, depending on solder paste type, Volume/thickness and board size/thickness. Consult your solder paste and equipment manufacturer for specific recommendations. 11 FX18 Series●10+Gbps 0.8mm pitch Board to Board Connectors ■Cleaning recommendations ●Organic solvent cleaning Solvent Type Room temperature cleaning Heated cleaning IPA ( Isopropyl alcohol) YES YES HCFC ( Hydrochlorofluorocarbon ) YES YES ●Water based cleaning When using water based cleaning agents (e.g., terpene, alkali saponifiers), select the cleaning agent based on the documentation issued by the various manufacturers of cleaning agents which describes it’s affects on metals, platings and plastics. Remove any moisture after cleaning. Residual flux or cleaning agents in the contact areas may affect electrical performance. ■Connector Precautions ●Allowable Clearance between the Mated Pair Within 1mm Recommend the allowable clearance at mating including angled insertion to be Max.1mm. Within 1mm Within 1mm Coplanar connection Vertical connection Stacking connection ●PCB Fixture PCB and chassis can not be stabilized only by the connector. Fixture to stabilize the PCB is necessary. When fitting using a rotary insertion plug, please ensure you refer to the Rotary Insertion Guideline (TADC 4-210630) ® 12 6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com The contents of this catalog are current as of date of 04/2012. Contents are subject to change without notice for the purpose of improvements.